Trade Surplus - 221 GP Epoxy

$87.00 Buy It Now, FREE Shipping, 30-Day Returns, eBay Money Back Guarantee
Seller: diy_composite_supplies ✉️ (33,453) 98.7%, Location: Hemmant, AU, Ships to: AU, Item: 145651462630 Trade Surplus - 221 GP Epoxy. High Quality Free Technical Advice

​​​​​​​DIY Composite Supplies - the original & largest supplier of fibreglass materials on eBay

Trade Surplus - 221 GP Epoxy

 

Trade Surplus brand Epoxy Resin 221 General Purpose Kit is a 2:1 ratio - contains 'tradesmen' high-quality resin and hardener, formulated in Australia for Australian conditions. (Epoxy Resin Kit is supplied as a complete pack with the correct amount of hardener). The Epoxy Resin Kit is a Low Viscosity Epoxy Resin that can be used in a huge variety of applications including boat hulls and structures which need to completely exclude moisture, as well as laminating and bonding of nearly all materials. Can be used by Crafters for casting coasters to 25mm thick. Can be used for River Tables and a whole host of other applications. When modified with fillers such as wood powder or Colloidal Silica the resin can be used as a filling and fairing compound with outstanding results. These resins can also be used with most types of fibreglass (if using Chopped Strand Mat, you will need a special 'Powder bound' CSM for Epoxy Resin which is available from us), carbon fibre, or kevlar, as well as used over urethane foams and other sandwich core materials. These resins tend to be fairly rigid when cured.

Directions for use: Mix resin and hardener EXACTLY in the ratio shown on the label (you can use a Epoxy Resin Pump Kit to measure the correct ratio for you, but these are so problematic, as they can suck air, or can sometimes have crystals form in the pumps - ).

Coverage: It takes about 250 grams of resin to saturate a meter square of Fibreglass Cloth (200gram weight) or about 200 grams of mixed Epoxy resin to saturate 1 square meter of a flat non porous surface.

 

Following factors affect the curing time:

1. Mixing quantity (the more you mix, the fast it cures and vice versa).

2. Ambient Temperature (higher the air temperature will speed up the curing)

Mixing ratio: 2:1 (2 Parts A resin base and 1 Part B hardener by WEIGHT ).

Application temperature: Wide temperature range through summer to winter.

Pot life(working time): Just over 1 hour (Data based on 100ml mixing; 20 degree C room temperature).

Time to reach non-tacky: 3-18 hrs Depending on the room temperature (Data based on 100ml mixing).

Time to reach full cure: 24 hrs or more (Data based on 100ml mixing).

Viscosity: 600 cps for Part A (Brookfield 20 rpm). 150 cps for Part B (Brookfield 20 rpm).

Clarity: Pt-Co value < 10 for both Part A and Part B

Compatibility: Binding to metal, inorganic materials including cement; glass, stone, natural materials including wood; particle board, most plastics except polyethylene, polypropylene, EPDM.

 

Shelf life of our epoxies is approx. 12 months. Product maybe supplied in alternate brand packaging but product is identical

Acetone, Cloth, Chopped Strand Mat, Fillers, Tools and safety equipment are available in our store.

Clean all brushes, rollers and fibreglass tools with Acetone.

Always wear gloves and dust masks and avoid breathing vapours of resin or dust residue.

 

Please Note: As this product is very pure epoxy. And it acts in a similar manner just like pure honey (epoxies act similar to honey in that, during winter honey is extremely thick and yet in summer, that same honey is very thin and runny). So it is with epoxies. And just like pure honey which sometimes turns to sugar? Pure Epoxy resin can act in a similar way and develop crystals (usually in Part A). this is not from faulty resin but common thought is that it is from the cylic hot days and cold nights when stored. An easy fix is to heat the jugs up in very hot water for about 30 mins and this will restore the resin to perfectly clear. The heating is also good to help remove air bubbles trapped in the epoxy due to transportation.

If I have to do a critical pour or application, as a tip, I heat the jugs up the day before the pour and let them cool down for the day of my pour. Additionally when mixing the two parts, I decant into the mixing container by pouring down the side of the container. All this effort is to try to limit any possible air bubbles that could ruin the finished product. Even when mixing, I use a wide rule and do not even take it off the bottom of the mixing container. Mixing is so important to get the best results and can take 3 to 5 mins.

Manufactured in Australia.

For material safety sheet, msg us refer SDS, do not swallow, keep away from children. CAUTION: All epoxies (except of FDA Food Grade, share the same chemical natural. Treat this like other epoxy. DO NOT SWALLOW. DO NOT CONTACT. Use all necessary PPE. KEEP AWAY FROM CHILDREN. For those with allergies? W: tradesurplus55.wixsite.com

Disclaimer: You must be a least 21 years old to order and possess the knowledge regarding toxicity, health hazards, and all regulations required to store, use and dispose of this compound. No warranties are expressed or implied for any reason by the seller. The purchaser agrees to hold harmless the seller in any event, whether accident or injury, regarding the use or misuse of this compound. By purchasing and paying for this item, you are agreeing to this disclaimer.

May be supplied in different containers due to stock availability

Stringent production processes including testing at production and further testing at packaging are designed to prevent any possible faulty products from being sent to customers. 99.9% of customer-reported faults can be traced back to user error. We request that the customer complete a resin test before reporting a possible fault. For testing of resin, use the following link: Resin testing  Additionally, when products are sold to 1000's of users worldwide without problems coming from the same source individual problems are mostly traced back to user error.

Some customers require additional information to help make their choices.

The pages being created include technical datasheets, safety data sheets, help sheets for usage, etc. and we hope that this will act as a service in helping customers gain maximum results from these stunning resins.

The new help pages are progressively populated. Please click on the link that follows :SDS and TDS, click link

Payment Freight Charge Shipping Feedback Payment Freight Charge Shipping Feedback

We prefer paypal payment but also accept bank deposit

For Dangerous Goods / Non free freight items - Please use Buy It Now, not the shopping cart. You can then request a total so we can invoice you (including freight charges - see Freight Charge tab).

For bank deposit - Commonwealth Bank. BSB - 062827 - Account - 10227187 (Consolidated Coatings - Des wages). Please eBay message to let us know if paying by bank deposit. ​​​​​​​

Q. How much will my freight cost?

A. Items with FREE FREIGHT in the TITLE when sent on their own within Australia will cost zero! Nothing! Free! 

We know that you will understand that the cost of freight to distant or remote areas in some cases is more expensive than the item itself. As such a surcharge for transport sometimes has to be applied to cover the long distances or remote areas of Queensland, NT and Western Australia and some other places.  We will contact you if you are in one of these areas and advise of the surcharge and can even send you an invoice for this surcharge prior to sending the goods.

NON Free Freight items are Dangerous goods or bulky items so will be sent by a courier and cannot go to a PO Box. They will incur a freight charge. Due to increasing Dangerous Goods freight prices, please email us for a freight quote. Please include items required, postcode and suburb. 

We request you leave a phone number for the courier.

Delivery is not available on weekends or public holidays. Please allow up to 14 working days for delivery, after the proof of payment is received. Please make payment within 3 working days of purchase, or sale may be cancelled.

Goods will be sent by Australia Post or Courier, at our discretion. If one method is preferred or cannot be used, please email to confirm freight costs, and make a note on the sale.​​​​​​​ ​​​​

*****FIVE STARS REALLY DO MATTER*****

Four stars are nice but eBay only rewards those sellers who receive five stars in all categories! If for ANY reason, you feel you did not receive 5 star service in all categories, please contact us before leaving feedback and give us the opportunity to EARN it from you. Rest assured you are our most valued asset and we will go that extra mile for your satisfaction. We want you to be our HAPPY customer :)

For technical advice on our products, please view our FAQ and Technical Help Page (From our eBay storefront)

You can contact us through eBay messages, or send us an email

Don't forget to 'Like' us on Facebook - DIY Composites

See our other items

Trade Surplus brand Epoxy Resin 221 General Purpose Kit is a 2:1 ratio - contains 'tradesmen' high-quality resin and hardener, formulated in Australia for Australian conditions. (Epoxy Resin Kit is supplied as a complete pack with the correct amount of hardener). The Epoxy Resin Kit is a Low Viscosity Epoxy Resin that can be used in a huge variety of applications including boat hulls and structures which need to completely exclude moisture, as well as laminating and bonding of nearly all materials. Can be used by Crafters for casting coasters to 25mm thick. Can be used for River Tables and a whole host of other applications. When modified with fillers such as wood powder or Colloidal Silica the resin can be used as a filling and fairing compound with outstanding results. These resins can also be used with most types of fibreglass (if using Chopped Strand Mat, you will need a special 'Powder bound' CSM for Epoxy Resin which is available from us), carbon fibre, or kevlar, as well as used over urethane foams and other sandwich core materials. These resins tend to be fairly rigid when cured. Directions for use: Mix resin and hardener EXACTLY in the ratio shown on the label (you can use a Epoxy Resin Pump Kit to measure the correct ratio for you, but these are so problematic, as they can suck air, or can sometimes have crystals form in the pumps - ). Coverage: It takes about 250 grams of resin to saturate a meter square of Fibreglass Cloth (200gram weight) or about 200 grams of mixed Epoxy resin to saturate 1 square meter of a flat non porous surface. Following factors affect the curing time: 1. Mixing quantity (the more you mix, the fast it cures and vice versa). 2. Ambient Temperature (higher the air temperature will speed up the curing) Mixing ratio: 2:1 (2 Parts A resin base and 1 Part B hardener by WEIGHT ). Application temperature: Wide temperature range through summer to winter. Pot life(working time): Just over 1 hour (Data based on 100ml mixing; 20 degree C room temperature). Time to reach non-tacky: 3-18 hrs Depending on the room temperature (Data based on 100ml mixing). Time to reach full cure: 24 hrs or more (Data based on 100ml mixing). Viscosity: 600 cps for Part A (Brookfield 20 rpm). 150 cps for Part B (Brookfield 20 rpm). Clarity: Pt-Co value &lt; 10 for both Part A and Part B Compatibility: Binding to metal, inorganic materials including cement; glass, stone, natural materials including wood; particle board, most plastics except polyethylene, polypropylene, EPDM. Shelf life of our epoxies is approx. 12 months. Product maybe supplied in alternate brand packaging but product is identical Acetone, Cloth, Chopped Strand Mat, Fillers, Tools and safety equipment are available in our store. Clean all brushes, rollers and fibreglass tools with Acetone. Always wear gloves and dust masks and avoid breathing vapours of resin or dust residue. Please Note: As this product is very pure epoxy. And it acts in a similar manner just like pure honey (epoxies act similar to honey in that, during winter honey is extremely thick and yet in summer, that same honey is very thin and runny). So it is with epoxies. And just like pure honey which sometimes turns to sugar? Pure Epoxy resin can act in a similar way and develop crystals (usually in Part A). this is not from faulty resin but common thought is that it is from the cylic hot days and cold nights when stored. An easy fix is to heat the jugs up in very hot water for about 30 mins and this will restore the resin to perfectly clear. The heating is also good to help remove air bubbles trapped in the epoxy due to transportation. If I have to do a critical pour or application, as a tip, I heat the jugs up the day before the pour and let them cool down for the day of my pour. Additionally when mixing the two parts, I decant into the mixing container by pouring down the side of the container. All this effort is to try to limit any possible air bubbles that could ruin the finished product. Even when mixing, I use a wide rule and do not even take it off the bottom of the mixing container. Mixing is so important to get the best results and can take 3 to 5 mins. Manufactured in Australia. For material safety sheet, msg us refer SDS, do not swallow, keep away from children. CAUTION: All epoxies (except of FDA Food Grade, share the same chemical natural. Treat this like other epoxy. DO NOT SWALLOW. DO NOT CONTACT. Use all necessary PPE. KEEP AWAY FROM CHILDREN. For those with allergies? W: tradesurplus55.wixsite.com Disclaimer: You must be a least 21 years old to order and possess the knowledge regarding toxicity, health hazards, and all regulations required to store, use and dispose of this compound. No warranties are expressed or implied for any reason by the seller. The purchaser agrees to hold harmless the seller in any event, whether accident or injury, regarding the use or misuse of this compound. By purchasing and paying for this item, you are agreeing to this disclaimer. May be supplied in different containers due to stock availability Stringent production processes including testing at production and further testing at packaging are designed to prevent any possible faulty products from being sent to customers. 99.9% of customer-reported faults can be traced back to user error. We request that the customer complete a resin test before reporting a possible fault. For testing of resin, use the following link: [Resin testing] (https://aafibreglass.com/resin-condition-customer-test/) Additionally, when products are sold to 1000's of users worldwide without problems coming from the same source individual problems are mostly traced back to user error. Some customers require additional information to help make their choices. The pages being created include technical datasheets, safety data sheets, help sheets for usage, etc. and we hope that this will act as a service in helping customers gain maximum results from these stunning resins. The new help pages are progressively populated. Please click on the link that follows : [SDS and TDS, click link] (https://tradesurplus55.wixsite.com/index/tools-and-tips)

​​​​​​​DIY Composite Supplies - the original & largest supplier of fibreglass materials on eBay

Trade Surplus - 221 GP Epoxy

 

Trade Surplus brand Epoxy Resin 221 General Purpose Kit is a 2:1 ratio - contains 'tradesmen' high-quality resin and hardener, formulated in Australia for Australian conditions. (Epoxy Resin Kit is supplied as a complete pack with the correct amount of hardener). The Epoxy Resin Kit is a Low Viscosity Epoxy Resin that can be used in a huge variety of applications including boat hulls and structures which need to completely exclude moisture, as well as laminating and bonding of nearly all materials. Can be used by Crafters for casting coasters to 25mm thick. Can be used for River Tables and a whole host of other applications. When modified with fillers such as wood powder or Colloidal Silica the resin can be used as a filling and fairing compound with outstanding results. These resins can also be used with most types of fibreglass (if using Chopped Strand Mat, you will need a special 'Powder bound' CSM for Epoxy Resin which is available from us), carbon fibre, or kevlar, as well as used over urethane foams and other sandwich core materials. These resins tend to be fairly rigid when cured.

Directions for use: Mix resin and hardener EXACTLY in the ratio shown on the label (you can use a Epoxy Resin Pump Kit to measure the correct ratio for you, but these are so problematic, as they can suck air, or can sometimes have crystals form in the pumps - ).

Coverage: It takes about 250 grams of resin to saturate a meter square of Fibreglass Cloth (200gram weight) or about 200 grams of mixed Epoxy resin to saturate 1 square meter of a flat non porous surface.

 

Following factors affect the curing time:

1. Mixing quantity (the more you mix, the fast it cures and vice versa).

2. Ambient Temperature (higher the air temperature will speed up the curing)

Mixing ratio: 2:1 (2 Parts A resin base and 1 Part B hardener by WEIGHT ).

Application temperature: Wide temperature range through summer to winter.

Pot life(working time): Just over 1 hour (Data based on 100ml mixing; 20 degree C room temperature).

Time to reach non-tacky: 3-18 hrs Depending on the room temperature (Data based on 100ml mixing).

Time to reach full cure: 24 hrs or more (Data based on 100ml mixing).

Viscosity: 600 cps for Part A (Brookfield 20 rpm). 150 cps for Part B (Brookfield 20 rpm).

Clarity: Pt-Co value < 10 for both Part A and Part B

Compatibility: Binding to metal, inorganic materials including cement; glass, stone, natural materials including wood; particle board, most plastics except polyethylene, polypropylene, EPDM.

 

Shelf life of our epoxies is approx. 12 months. Product maybe supplied in alternate brand packaging but product is identical

Acetone, Cloth, Chopped Strand Mat, Fillers, Tools and safety equipment are available in our store.

Clean all brushes, rollers and fibreglass tools with Acetone.

Always wear gloves and dust masks and avoid breathing vapours of resin or dust residue.

 

Please Note: As this product is very pure epoxy. And it acts in a similar manner just like pure honey (epoxies act similar to honey in that, during winter honey is extremely thick and yet in summer, that same honey is very thin and runny). So it is with epoxies. And just like pure honey which sometimes turns to sugar? Pure Epoxy resin can act in a similar way and develop crystals (usually in Part A). this is not from faulty resin but common thought is that it is from the cylic hot days and cold nights when stored. An easy fix is to heat the jugs up in very hot water for about 30 mins and this will restore the resin to perfectly clear. The heating is also good to help remove air bubbles trapped in the epoxy due to transportation.

If I have to do a critical pour or application, as a tip, I heat the jugs up the day before the pour and let them cool down for the day of my pour. Additionally when mixing the two parts, I decant into the mixing container by pouring down the side of the container. All this effort is to try to limit any possible air bubbles that could ruin the finished product. Even when mixing, I use a wide rule and do not even take it off the bottom of the mixing container. Mixing is so important to get the best results and can take 3 to 5 mins.

Manufactured in Australia.

For material safety sheet, msg us refer SDS, do not swallow, keep away from children. CAUTION: All epoxies (except of FDA Food Grade, share the same chemical natural. Treat this like other epoxy. DO NOT SWALLOW. DO NOT CONTACT. Use all necessary PPE. KEEP AWAY FROM CHILDREN. For those with allergies? W: tradesurplus55.wixsite.com

Disclaimer: You must be a least 21 years old to order and possess the knowledge regarding toxicity, health hazards, and all regulations required to store, use and dispose of this compound. No warranties are expressed or implied for any reason by the seller. The purchaser agrees to hold harmless the seller in any event, whether accident or injury, regarding the use or misuse of this compound. By purchasing and paying for this item, you are agreeing to this disclaimer.

May be supplied in different containers due to stock availability

Stringent production processes including testing at production and further testing at packaging are designed to prevent any possible faulty products from being sent to customers. 99.9% of customer-reported faults can be traced back to user error. We request that the customer complete a resin test before reporting a possible fault. For testing of resin, use the following link: Resin testing  Additionally, when products are sold to 1000's of users worldwide without problems coming from the same source individual problems are mostly traced back to user error.

Some customers require additional information to help make their choices.

The pages being created include technical datasheets, safety data sheets, help sheets for usage, etc. and we hope that this will act as a service in helping customers gain maximum results from these stunning resins.

The new help pages are progressively populated. Please click on the link that follows :SDS and TDS, click link

Payment

We prefer paypal payment but also accept bank deposit

For Dangerous Goods / Non free freight items - Please use Buy It Now, not the shopping cart. You can then request a total so we can invoice you (including freight charges - see Freight Charge tab).

For bank deposit - Commonwealth Bank. BSB - 062827 - Account - 10227187 (Consolidated Coatings - Des wages). Please eBay message to let us know if paying by bank deposit. ​​​​​​​

Freight Charge

Q. How much will my freight cost?

A. Items with FREE FREIGHT in the TITLE when sent on their own within Australia will cost zero! Nothing! Free! 

We know that you will understand that the cost of freight to distant or remote areas in some cases is more expensive than the item itself. As such a surcharge for transport sometimes has to be applied to cover the long distances or remote areas of Queensland, NT and Western Australia and some other places.  We will contact you if you are in one of these areas and advise of the surcharge and can even send you an invoice for this surcharge prior to sending the goods.

NON Free Freight items are Dangerous goods or bulky items so will be sent by a courier and cannot go to a PO Box. They will incur a freight charge. Due to increasing Dangerous Goods freight prices, please email us for a freight quote. Please include items required, postcode and suburb. 

We request you leave a phone number for the courier.

Shipping

Delivery is not available on weekends or public holidays. Please allow up to 14 working days for delivery, after the proof of payment is received. Please make payment within 3 working days of purchase, or sale may be cancelled.

Goods will be sent by Australia Post or Courier, at our discretion. If one method is preferred or cannot be used, please email to confirm freight costs, and make a note on the sale.​​​​​​​ ​​​​

Feedback

*****FIVE STARS REALLY DO MATTER*****

Four stars are nice but eBay only rewards those sellers who receive five stars in all categories! If for ANY reason, you feel you did not receive 5 star service in all categories, please contact us before leaving feedback and give us the opportunity to EARN it from you. Rest assured you are our most valued asset and we will go that extra mile for your satisfaction. We want you to be our HAPPY customer :)

For technical advice on our products, please view our FAQ and Technical Help Page (From our eBay storefront)

You can contact us through eBay messages, or send us an email

Don't forget to 'Like' us on Facebook - DIY Composites

See our other items

 

Trade Surplus brand Epoxy Resin 221 General Purpose Kit is a 2:1 ratio - contains 'tradesmen' high-quality resin and hardener, formulated in Australia for Australian conditions. (Epoxy Resin Kit is supplied as a complete pack with the correct amount of hardener). The Epoxy Resin Kit is a Low Viscosity Epoxy Resin that can be used in a huge variety of applications including boat hulls and structures which need to completely exclude moisture, as well as laminating and bonding of nearly all materials. Can be used by Crafters for casting coasters to 25mm thick. Can be used for River Tables and a whole host of other applications. When modified with fillers such as wood powder or Colloidal Silica the resin can be used as a filling and fairing compound with outstanding results. These resins can also be used with most types of fibreglass (if using Chopped Strand Mat, you will need a special 'Powder bound' CSM for Epoxy Resin which is available from us), carbon fibre, or kevlar, as well as used over urethane foams and other sandwich core materials. These resins tend to be fairly rigid when cured.

Directions for use: Mix resin and hardener EXACTLY in the ratio shown on the label (you can use a Epoxy Resin Pump Kit to measure the correct ratio for you, but these are so problematic, as they can suck air, or can sometimes have crystals form in the pumps - ).

Coverage: It takes about 250 grams of resin to saturate a meter square of Fibreglass Cloth (200gram weight) or about 200 grams of mixed Epoxy resin to saturate 1 square meter of a flat non porous surface.

 

Following factors affect the curing time:

1. Mixing quantity (the more you mix, the fast it cures and vice versa).

2. Ambient Temperature (higher the air temperature will speed up the curing)

Mixing ratio: 2:1 (2 Parts A resin base and 1 Part B hardener by WEIGHT ).

Application temperature: Wide temperature range through summer to winter.

Pot life(working time): Just over 1 hour (Data based on 100ml mixing; 20 degree C room temperature).

Time to reach non-tacky: 3-18 hrs Depending on the room temperature (Data based on 100ml mixing).

Time to reach full cure: 24 hrs or more (Data based on 100ml mixing).

Viscosity: 600 cps for Part A (Brookfield 20 rpm). 150 cps for Part B (Brookfield 20 rpm).

Clarity: Pt-Co value < 10 for both Part A and Part B

Compatibility: Binding to metal, inorganic materials including cement; glass, stone, natural materials including wood; particle board, most plastics except polyethylene, polypropylene, EPDM.

 

Shelf life of our epoxies is approx. 12 months. Product maybe supplied in alternate brand packaging but product is identical

Acetone, Cloth, Chopped Strand Mat, Fillers, Tools and safety equipment are available in our store.

Clean all brushes, rollers and fibreglass tools with Acetone.

Always wear gloves and dust masks and avoid breathing vapours of resin or dust residue.

 

Please Note: As this product is very pure epoxy. And it acts in a similar manner just like pure honey (epoxies act similar to honey in that, during winter honey is extremely thick and yet in summer, that same honey is very thin and runny). So it is with epoxies. And just like pure honey which sometimes turns to sugar? Pure Epoxy resin can act in a similar way and develop crystals (usually in Part A). this is not from faulty resin but common thought is that it is from the cylic hot days and cold nights when stored. An easy fix is to heat the jugs up in very hot water for about 30 mins and this will restore the resin to perfectly clear. The heating is also good to help remove air bubbles trapped in the epoxy due to transportation.

If I have to do a critical pour or application, as a tip, I heat the jugs up the day before the pour and let them cool down for the day of my pour. Additionally when mixing the two parts, I decant into the mixing container by pouring down the side of the container. All this effort is to try to limit any possible air bubbles that could ruin the finished product. Even when mixing, I use a wide rule and do not even take it off the bottom of the mixing container. Mixing is so important to get the best results and can take 3 to 5 mins.

Manufactured in Australia.

For material safety sheet, msg us refer SDS, do not swallow, keep away from children. CAUTION: All epoxies (except of FDA Food Grade, share the same chemical natural. Treat this like other epoxy. DO NOT SWALLOW. DO NOT CONTACT. Use all necessary PPE. KEEP AWAY FROM CHILDREN. For those with allergies? W: tradesurplus55.wixsite.com

Disclaimer: You must be a least 21 years old to order and possess the knowledge regarding toxicity, health hazards, and all regulations required to store, use and dispose of this compound. No warranties are expressed or implied for any reason by the seller. The purchaser agrees to hold harmless the seller in any event, whether accident or injury, regarding the use or misuse of this compound. By purchasing and paying for this item, you are agreeing to this disclaimer.

May be supplied in different containers due to stock availability

Stringent production processes including testing at production and further testing at packaging are designed to prevent any possible faulty products from being sent to customers. 99.9% of customer-reported faults can be traced back to user error. We request that the customer complete a resin test before reporting a possible fault. For testing of resin, use the following link: Resin testing  Additionally, when products are sold to 1000's of users worldwide without problems coming from the same source individual problems are mostly traced back to user error.

Some customers require additional information to help make their choices.

The pages being created include technical datasheets, safety data sheets, help sheets for usage, etc. and we hope that this will act as a service in helping customers gain maximum results from these stunning resins.

The new help pages are progressively populated. Please click on the link that follows :SDS and TDS, click link

  • Condition: New
  • Size: 3kg kit
  • Brand: Platinum
  • Custom Bundle: No
  • Model: Kit - Part A Base Resin & Part B Hardener
  • Modified Item: No
  • Colour: Clear

PicClick Insights - Trade Surplus - 221 GP Epoxy PicClick Exclusive

  •  Popularity - 2 watchers, 0.1 new watchers per day, 22 days for sale on eBay. Good amount watching. 0 sold, 10 available.
  •  Best Price -
  •  Seller - 33,453+ items sold. 1.3% negative feedback. Great seller with very good positive feedback and over 50 ratings.

People Also Loved PicClick Exclusive