Note
Orders from the USA will all be shipped out via our US warehouse.
If you order from outside of US the product will be shipped from China.
EM282-R
EM282-R is designed to locate leaks in pressure and vacuum systems.
It can be used to detect and locate the source of the ultrasonic emission generated by gas or liquid flowing through a small restrictive opening.
It uses the advanced ultrasonic sensing technique and features small size, light weight, reliable detection, easy use and utility.
In conjunction with EM282-T Ultrasonic Transmitter, EM282-R can also be used for tightness check in sealed compartments such as container, tank, car, etc.
EM282-T
EM282-T can send out ultrasonic sound of 40kHz and is designed to be used in conjunction with EM282-R.
Non-pressurized vessels or containers cannot generate ultrasonic sounds. Tightness check for them (also cars, ships, etc.) can be performed by using EM282-R and EM282-T together.
To do it, turn on EM282-T and place it inside the compartment to be checked.
The ultrasonic sound emitted by EM282-T will pass through orifice or faulty seal and will be quickly located by EM282-R.
Principle
Turbulence created by gas or air forced through a small orifice generates ultrasonic sound.
Ultrasonic sound occur when the atmosphere leaks into a vacuum vessel or when a pressure vessel leaks to the outside atmosphere.
Ultrasonic sound's frequency is related to the size of the orifice which ultrasonic sound passes through, but usually the frequency is about 40kHz.
Ultrasonic sound is very directional, this directionality is used to pinpoint the origin of the ultrasonic sound, the leak point.
Operation Mode
EM282-R can be used in one the two modes, one is Active Mode, another is Passive Mode.
In the Passive Mode, only EM282-R is used.
Passive Mode can be detect and locate leaks in pressure and vacuum systems.
These leaks can generate ultrasonic emission which can be detected by EM282-R.
In the areas where leaking gases are not pressurized or not sufficiently pressurized, there is no ultrasonic sound for detection.
In this situation, you can use Active Mode to detect and locate leak.
In Active Mode, EM282-R is used in conjuction with EM282-T.
EM282-T is an ultrasonic transmitter which can send out ultrasonic sound.
By placing EM282-T in sealed area, and scanning the extorior of this area with EM282-R, the ultrasonic sound escaping from the sealed area will be detected.
A flaw in the seal can quickly and accurately be located and pinpointed.
General Specification
Type: Ultrasonic Wave Leak Detector
Alarm Indication: The LEAK LED lights and the Ticking Tone increases in frequency
Frequency Response: 40kHz ± 2kHz
Operating Condition: 0°C-40°C, <80%RH
Battery: 9V, 6F22 or equivalent
Size: 192*50*30mm(Receiver) / 101*59*28mm(Transmitter)
Weight: about 115g(Receiver) / 90g(Transmitter)
Item Specifics | |
---|---|
Items Included | Carrying Case |
Year Manufactured | 2020 |
MPN | EM282 |
Features | Mechanical |
Brand | all-sun |
Type | Leak Detector |
Detection | Chlorofluorocarbons (CFC) |
Material | Plastic |
Color | White |
1.We accept PayPal only.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
1.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2.Items will be shipped within 1-3 business day when we received payment.
3.Delivery time depends on destination and other factors;
4.International buyers please note:
a.Import duties, taxes and charges are not included in the item price or shipping charges. These charges are buyer’s responsibility. We will try our best to reduce the risk of the custom duties.
b.Please check with your country's customs office to determine what these additional costs will be prior to buying.
Please feel free to contact us via eBay or e-Mail if you have any question. We will reply within 24 hours in working day.
Shop Category Store Home MULTIMETERS ◈ Mini Digital Multimeter ◈ Digital Automotive Multimeter ◈ Handheld Digital Multimeter ◈ Clamp Meter METAL DETECTOR ◈ Kids Metal Detector ◈ Underground Metal Detector ◈ Security Metal Detector OSCILLOSCOPE ◈ Single Channel HOME METER ◈ Christmas Voltage Tester ◈ Stud Finder ◈ Fence Voltage Tester ◈ Air Flow & Anemometers ◈ Moisture & pH Meters AUTOMOTIVE DIAGNOSE TOOLS ◈ Auto Battery Tester ◈ Car Paint Thickness Tester ◈ Brake Fulid Tester ◈ Circuit Tester ◈ Fuel Injector Tester ◈ Ultrasonic Leak Detector ◈ Car Memory Data Saver ◈ Lambda Tester & Simulator ◈ Ignition Testers |
Ultrasonic Leak Detector Transmitter Air Water Dust Leak Pressure Vacuum 40kHz
Note Due to rules of some shipping courier,parcels may not include batteries,otherwise it will not get through the custom. Please prepare 9V, 6F22 or equivalent , 2 pieces
EM282-R
EM282-R is designed to locate leaks in pressure and vacuum systems. It can be used to detect and locate the source of the ultrasonic emission generated by gas or liquid flowing through a small restrictive opening. It uses the advanced ultrasonic sensing technique and features small size, light weight, reliable detection, easy use and utility. In conjunction with EM282-T Ultrasonic Transmitter, EM282-R can also be used for tightness check in sealed compartments such as container, tank, car, etc.
EM282-T
EM282-T can send out ultrasonic sound of 40kHz and is designed to be used in conjunction with EM282-R. Non-pressurized vessels or containers cannot generate ultrasonic sounds. Tightness check for them (also cars, ships, etc.) can be performed by using EM282-R and EM282-T together. To do it, turn on EM282-T and place it inside the compartment to be checked. The ultrasonic sound emitted by EM282-T will pass through orifice or faulty seal and will be quickly located by EM282-R.
Principle
Turbulence created by gas or air forced through a small orifice generates ultrasonic sound. Ultrasonic sound occur when the atmosphere leaks into a vacuum vessel or when a pressure vessel leaks to the outside atmosphere. Ultrasonic sound's frequency is related to the size of the orifice which ultrasonic sound passes through, but usually the frequency is about 40kHz. Ultrasonic sound is very directional, this directionality is used to pinpoint the origin of the ultrasonic sound, the leak point.
Operation Mode
EM282-R can be used in one the two modes, one is Active Mode, another is Passive Mode. In the Passive Mode, only EM282-R is used. Passive Mode can be detect and locate leaks in pressure and vacuum systems. These leaks can generate ultrasonic emission which can be detected by EM282-R.
In the areas where leaking gases are not pressurized or not sufficiently pressurized, there is no ultrasonic sound for detection. In this situation, you can use Active Mode to detect and locate leak. In Active Mode, EM282-R is used in conjuction with EM282-T. EM282-T is an ultrasonic transmitter which can send out ultrasonic sound. By placing EM282-T in sealed area, and scanning the extorior of this area with EM282-R, the ultrasonic sound escaping from the sealed area will be detected. A flaw in the seal can quickly and accurately be located and pinpointed.
General Specification
Type: Ultrasonic Wave Leak Detector Alarm Indication: The LEAK LED lights and the Ticking Tone increases in frequency Frequency Response: 40kHz ± 2kHz Operating Condition: 0°C-40°C, <80%RH Battery: 9V, 6F22 or equivalent Size: 192*50*30mm(Receiver) / 101*59*28mm(Transmitter) Weight: about 115g(Receiver) / 90g(Transmitter)
All rights reserved. |