Easy to WeedEasy and Ready-to-cut material designed for custom garment decoration. The backing is pressure and temperature-sensitive and easier to take off once the design has been transferred to the desired surface. It is a durable polyurethane that is used to design custom t-shirts as it is engineered to be easy to use! It has the best stretch so it moves like part of the garment and is thin and smooth enough to be layered! |
Cutting Our vinyl is suitable for all kinds of cutting machines, and the 12-inch width is suitable for all kinds of cutting pads. When the design is finished, please pay attention to wait 24 hours before the first wash. Machine wash warm or cold with mild detergent. Do not bleach or dry clean. Dry on a normal dryer setting. | |
Transfer Application Instruction Put the front of the sheet you designed on the shirt. If you use a household iron, do not use the steam setting. Heat the iron at a moderate temperature (302°F)– 320°F)); use medium / hard pressure for 10-15 seconds for each part of the design; if using a hot press, preheat the clothes for 2-3 seconds; design at 305°F); use medium pressure for 10-15 seconds; Warm 1. Make sure there are no wrinkles on the material. 2. If you are having trouble, try turning the shirt 90 degrees and pressing again, this should eliminate problems from cold spots. 3. If you've already ruined one shirt, keep using it to experiment. Cut small pieces of heat transfer and try raising or lowering your temperature, or pressing longer or for less time. |