G410 Stainless Countersunk Square Ribbed Self Drilling Metal Decking Screw Tek
$9.00 Buy It Now, FREE Shipping, 30-Day Returns, eBay Money Back Guarantee
Seller: 
fastenersgalore1 ✉️ (81,237) 99.8%,
Location: Murarrie, QLD, AU,
Ships to: AU,
Item: 303749587445
G410 Stainless Countersunk Square Ribbed Self Drilling Metal Decking Screw Tek.
Product Information
fastenersgalore1 ✉️ (81,237) 99.8%,
Location: Murarrie, QLD, AU,
Ships to: AU,
Item: 303749587445
G410 Stainless Countersunk Square Ribbed Self Drilling Metal Decking Screw Tek. - Store
- |
- About Us
- |
- Terms
- |
- Payment
- |
- Delivery
- |
- Returns
- |
- Technical
- |
- Contact
| Product | Self Drilling Metal Screws |
| Head Type | Countersunk, Self Embedding Flat Head |
| Screw Size | 10g (4.80mm) |
| Thread Pitch (TPI) | 16 |
| Length - Measure overall | Choose from the dropdown above |
| Thread Length APPROX | 35mm |
| Drill Point Length APPROX | 4.80 ~ 5.20mm |
| Head Diameter APPROX | 8.75 ~ 9.28mm |
| Head Height APPROX | 2.95mm |
| Rec Drill Type | 350 - 550 Watts |
| Nibbed | 6 ribs under the Head |
| Maximum Timber Thickness | 22mm |
| Min - Max Steel Thickness APPROX | 1.20 ~ 3.50mm |
| Material | Stainless Steel |
| Grade | G410 |
| Drive | Square |
| Drive Size | SQ2 |
| Driver Bit | Can be found in our store under "Screwdriver Bits" |
| Brand | Fasteners Galore |
| Quantity | Choose from the dropdown above |
- Countersunk Square Self Drilling Metal Screw Stainless G410 provide a flush or recess finish making then ideal for many applications, like mounting hinges or gate hardware. Will require countersinking.
- Installation: Easy to install using a SQ2 impact rated square driver bit in a impact power tool, a large range of bits are available in the drilling driving tools section of our website.
- Material / Coating: Excellent grade for due to its hardness. Grade 410 is a martensitic stainless steel and so can be hardened by heat treatment (which Austenitic types 304 and 316 cannot be). For this reason, it has excellent drilling properties – however 410 has lower corrosion resistance than grade 304 and should not be used in highly or even moderately corrosive environments or tea-staining will result
- Can Stainless corrode?: Stainless steel is corrosion-resistant but not corrosion-proof and corrosion can occur if the material is installed or handled incorrectly. The use of tools and drills made from conventional steel during the installation of stainless steel fasteners may also lead to problems. Even the hardest of tools can produce debris that leaves minute steel particles on the stainless steel fastener surfaces or in pre-drilled holes. It is these particles that often rust when exposed to moisture or oxygen and can result in a stained or tarnished finish to the stainless steel material
- What does TPI stand for?: TPI stands for “threads per inch” which literally means the number of threads within each inch on a screw, a bolt, or a fastener. To determine the TPI of a screw, count the number of threads contained within an inch of length on the fastener. If the screw is less than an inch count ½” of an inch and multiply by 2
- Length of Thread: Always choose a self driller with enough threads to fully engage in the base metal. For attachments to 1/4" base steel, a self-drilling screw should have at least 1/4" of threads. It is helpful, but not critical, that the threads also engage in the material being fastened. The head of the fastener provides the bearing force for the material being fastened, while the threads provide the clamping force in the base material
- To determine Thread Length: Before buying countersunk screws, it is recommended to work out the overall length you need. Because the overall length includes head height and drill point length you have to add the 2 together then minus that from the overall length to get the approx thread length. For example: a 10g-16 x 35mm countersunk self drilling screw has a 4mm head height and a drill point of approx. 12.50mm. This equals 16.50mm approx, so, on a 35mm long screw you are going to be left with approx. 18.50mm of thread. This detail is often overlooked and it is only when the screws turn up you find they are too short and your project is delayed. All this data along with other specifications is on the specifications table and as always, measurements are approx and do vary between batches and suppliers, if critical always check with us prior
- Drill Point Style: A twist drill style hardened point for fast driving into light gauge sheeting, cladding panels, sections and assemblies. The length of the drilling flutes determine the amount of drilling swaft that can be expelled and therefore the depth of metal can be drilled
- How to measure the length of a Metal Screw: Fastener length is generally measured from the point where the surface of the material will be when the fastener is installed to the end of the fastener. Thus, fasteners with heads that sit above the surface are measured from under the head to the end of the fastener, while fasteners that sit flush with the surface are measured from the top of the head to the end of the fastener
- Need a Driver Bit?: A large range of suitable driver bits are available in the "Drilling, Driving and Tools" section of our website
- Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you see a problem with our specifications please contact us
- Dimensions: Our stock is sourced from various suppliers, therefore differences may exist between batches such as height, width, visible stamped markings, appearance or actual finish
- Photos: are of the product but may not be the actual diameter, length, thread length, colour you require, always refer to the size in the description and additional specifications data provided prior to ordering
- Buy with confidence: ⇒ 8+ years experience selling online, > 15,000 stock lines, > 40 million pieces ex stock in Brisbane QLD
- Prices: include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
- Need help? Message us through eBay
| ebay listing template design by |
- Condition: Brand New
- Screw Diameter & Length: 10g x 40mm
- Pack Quantity: 10
- Brand: Fasteners Galore
- MPN: 09CSS101640FG
- Product: Countersunk Square Self Driller
- Australian Stock: YES, supplied & despatched ex Brisbane
- Tax Invoice Supplied: YES
- Size: 10g (4.80mm)
- Thread Pitch (TPI): 16
- Thread Type: Coarse
- Head Diameter APPROX: 8.75 ~ 9.28mm
- Head Height APPROX: 2.95mm
- Drill Point Length APPROX: 4.80 ~ 5.20mm
- Rec Drill Type APPROX: 350 - 550 Watts
- Max. Timber Thickness APPROX: 22mm
- Min - Max Steel Thickness APPROX: 1.20 ~ 3.50mm
- Material: Stainless Steel G410 Grade
- Freight Free: FREE delivery anywhere in AUSTRALIA
- Weight (kg): 0.0406
PicClick Insights - G410 Stainless Countersunk Square Ribbed Self Drilling Metal Decking Screw Tek PicClick Exclusive
- Popularity - 14 watchers, 0.0 new watchers per day, 1,262 days for sale on eBay. Super high amount watching. 1 sold, 10 available.
- Best Price -
- Seller - 81,237+ items sold. 0.2% negative feedback. Top-Rated Plus! Top-Rated Seller, 30-day return policy, ships in 1 business day with tracking.
People Also Loved PicClick Exclusive
Countersunk Square Ribbed Wing Self Drilling Metal Tek Screw Stainless G410
$9.00 Buy It Now 15d 18h
G410 Stainless Countersunk Square Ribbed WING Self Drilling Metal Tek Screw
$9.00 Buy It Now 15d 22h
Galvanised Countersunk Phillips Metal Self Drilling Screw Tek Galv
$7.00 Buy It Now 19d 17h
G410 Stainless Steel 10g (4.8mm) Wafer Square Metal Self Drilling Screw Driller
$8.00 Buy It Now 19d 11h
Galvanised Countersunk Phillip Ribbed Self Drilling Metal Decking Screw Tek
$6.00 Buy It Now 19d 17h
Stainless Steel G410 Countersunk Head Self Drilling Screw Square Drive
$130.00 Buy It Now
10g (4.8mm) COUNTERSUNK WING SQUARE METAL Self Drilling Screw Stainless G410
$9.00 Buy It Now