Sampson High Tensile Washer M30 (30mm) x 60mm Metric 8.8 Zinc Plated ASTM F436M

$7.00 Buy It Now, FREE Shipping, 30-Day Returns, eBay Money Back Guarantee
Seller: Top-Rated Seller thefastenerwarehouse1 ✉️ (38,170) 99.9%, Location: Brisbane, AU, Ships to: AU, Item: 192149614226 Sampson High Tensile Washer M30 (30mm) x 60mm Metric 8.8 Zinc Plated ASTM F436M.
  • M30 (1-1/4") x 60mm x 1.80 - 1.99mm approx thickness range High Tensile Flat Washer Class 8.8 Zinc Plated are used to increase the bearing surface of a nut or fastener's head thus spreading the clamping force over a larger area. Used with high tensile bolts. A washer also ensures a smooth base for the nut to press against.
  • High Tensile Washers specifications: High tensile washers do not have an Australian or International standard therefore tolerances, sizing, supplier markings (if applicable) and material finish can be vastly different between batches and suppliers, use the measurements in this listing as a guide only and if they are critical please contact us
  • Understanding and measuring washer sizing: Washer sizes can be a little confusing so we will do our best to try to make it a little easier to understand. When searching for a washer, firstly, let's say you have a M6 bolt and you want a matching washer, look for washers with M6 at the beginning of the description (you can speed this up by using our "shop by" filters). If you already have a washer and you are trying to match it, measure the inside, then look for a size slightly smaller that your measurement. For example the inside measurement of the washer you measured is approx 6.50mm, you need to look for a M6 washer. If the washer measured 17.25mm internally then you need a M16 Washer. Remember washers are not precision fasteners and variations in sizing do exist and all measurements on our site should only be used as a guide
  • Are Metric & Imperial Washers Interchangeable: In nearly all cases yes, they are. With our huge range it can be hard finding the right size so to help we have added metric sizing to the imperial range and equivalent imperial size to the metric range. If you are still unsure, click on the washer you are interested in and open the technical specifications tab for additional washer specs
  • Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you see a problem with our specifications please contact us
  • Dimensions: Our stock is sourced from various suppliers, therefore differences may exist between batches such as inside dimensions, outside thickness, visible stamped head markings, appearance and actual finish
  • Material / Coating: Zinc Plated is the most common fastener of plating due to its the low cost and shinny bright silver finish. A thin layer of zinc is applied by either electroplating or mechanically. It is intended to be used internally as it only offers an average level of protection against corrosion. Whilst some people use it externally it isnt recommended if corrosion is a concern. If you want a fastener that will withstand the outdoor elements choose from our either our Stainless steel or galvanised range
  • Photos: are of the product but may not be the actual size, width or thickness of this listing, always refer to the size in the description and additional specifications data provided prior to ordering
  • Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
  • Note: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Bolt and Nut Australia is not responsible for any loss, claim or damages arising therefrom. In developing this information, Bolt and Nut Australia has made a determined effort to present it accurately
  • Buy with confidence: ⇒ 10+ years experience selling online, > 19,000 stock lines, > 60 million pieces ex stock in Brisbane QLD
  • Prices: include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
  • Condition: Brand New
  • Washer Type & Size: M30 x 60 x 3.8 Sampson Washer
  • Pack Quantity: 1
  • Model: Washer
  • Type: High Tensile
  • System of Measurement: Metric
  • To Suit Bolt / Screw Size: M30 (30mm)
  • Inside Dimension APPROX: 32.50 - 34.00mm
  • Outside Dimension APPROX: 58.00 - 60.00mm
  • Thickness APPROX: 3.60 - 3.99mm
  • Material: High Tensile Steel
  • Class / Grade: Class 8.8
  • Finish: Zinc Plated
  • Corrosion Protection Level: Moderate
  • Freight Free: FREE delivery anywhere in AUSTRALIA
  • Tax Invoice Supplied: Yes
  • Australian Stock: Yes, supplied ex Brisbane
  • Brand: Hobson
  • MPN: WR43ZM30

PicClick Insights - Sampson High Tensile Washer M30 (30mm) x 60mm Metric 8.8 Zinc Plated ASTM F436M PicClick Exclusive

  •  Popularity - 0 watchers, 0.0 new watchers per day, 2,550 days for sale on eBay. 0 sold, 10 available.
  •  Best Price -
  •  Seller - 38,170+ items sold. 0.1% negative feedback. Top-Rated Plus! Top-Rated Seller, 30-day return policy, ships in 1 business day with tracking.

People Also Loved PicClick Exclusive