Reufrbished Printer Print Head for TS5080 6020 6050 6051 TS6052/6080 QY6-0089

Unsold See similar items $58.65 Buy It Now or Best Offer, FREE Shipping, 60-Day Returns, eBay Money Back Guarantee
Seller: bruceshark-004 ✉️ (13,885) 98.2%, Location: GuangDong, CN, Ships to: WORLDWIDE, Item: 256414687780 Reufrbished Printer Print Head for TS5080 6020 6050 6051 TS6052/6080 QY6-0089. SAFE & SECURE SHOPPING 100% SATISFACTION GUARANTEED FAST SHIPPING Store Categories

Store Categories
Reufrbished Printer Print Head for TS5080 6020 6050 6051 TS6052/6080 QY6-0089

Product Description

Reufrbished QY6-0089 Printhead for TS5050 TS5051 TS5053 TS5055 TS5070 TS5080 TS6050 TS6051 TS6052 TS6080 Feature: Excellent performance and high quality. Made of high-quality material, durable, firm and stable for us to use. This is a cleaned, thoroughly tested and sealed Printhead. Good stability, long lifespan. Full color function. Product Condition :  Original Refurbished Printhead ,95% New. Warranty : One Year Free Warranty , Life-long Service. OEM code: QY6-0089 QY6-0089-000 QY60089 QY6 0089 Compatible Models: Fit for TS5080 TS6020 TS6050 TS6051 TS6052 TS6080 TS5050 TS5051 TS5053 TS5055 TS5070 Packing includes: 1 x print head Note: 1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned. After loading the print head, please don't install ribbon overhead 10 pieces of A4 document, so that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation. 2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly, so please troubleshoot the problem of the mainboard before replacing the print head. In addition, the F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model. If replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken. 3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly. There is a regulation that printhead is not warranty, and it is delicate and expensive. please do not make commissioning on the machine, and please treat it with caution. 4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station or find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble. Before you buy this product, you need to pay attention to: NOTE: The printer must be disconnected from the power source before the print head is installed, otherwise it has the risk of causing the print head circuit board to burn out. 1. When the print head is shipped, a protective liquid will be applied to the print head. Before using it for the first time, wipe the print head before installing it.Just wipe the copper sheet gently, wipe it clean with soft paper, don't wipe it with cleaning fluid or eraser. 2. During the regeneration process of the print head, the ink will be cleaned and the protection liquid will be injected. If there is no protective liquid, the print head cannot print because the pipeline channel is dry.If the print head can be detected, but the colors are uneven or blurred, you can continue printing with ink. Print a few more sheets of paper and wait for the excess protection fluid to run out, then you can print normally 3. If the printing effect is not clear, press the machine cleaning button to clean (the print head must be cleaned only when the ink cartridge is sufficient, or it will burn out easily). 4. You don't need to clean the print head with cleaning fluid, you can clean the print head directly on the machine. If you clean the print head with the cleaning fluid(or water) and do not drop the protective fluid, the print head will be completely blocked, and it will be useless. Before you install this product, you need to pay attention to: 1.After receiving the print head, if you use a needle tube to inject water to check the nozzle or see if it is blocked, this is a very redundant and dangerous behavior.If the printing effect is not clear, press the machine cleaning button (the pFirst of all, once the print head enters the water, if the water is not dry, it is powered on. The main board will be burned out, and the print head will be burnt out. Secondly, the print heads sold in our shop have been strictly tested and filled with protective liquid.If you use a needle to inject water into the print head, it will not only wash away the protective liquid in the head, but also easily cause air blockage in the print head, resulting in no ink. 2.Be careful when installing the print head, be sure to cut off the power first, and install it in place. 3.When connecting the plug cable, do not have ink on it, and make sure that it is in good contact with the socket. 4.The steel shaft should also be clean and smooth. You can use a paper towel to stick some lubricating oil to wipe it. Do not directly add oil to the shaft. The excess oil will flow to the print head and cause damage. 5.After the machinery and circuit are all correct, check the water circuit. Firstly, check whether the ink volume in the ink cartridge is sufficient; secondly, check whether the small cleaning blade and the ink suction pump are dirty. 6.There will be air in the newly installed print head, so it will not print normally immediately. The printer can only produce perfect results after the air in the head is completely discharged.You can use the machine's own cleaning function for intermittent cleaning(Clean 2 times each time, and then 2 times after 30 minutes) Repeated over-cleaning will cause ink accumulation in the cleaning pump, which will not only cause color mixing, ink leakage, and waste ink.Finally, you can print more pictures to let the print head exhaust air during work. About Us

Bruce & Shark  is a company Focus on Motorcycle parts more than 11 years. The design inspiration comes from the awe of the vast sea and worship of the fighting sharks, therefore Bruce & Shark takes a shark as brand logo. Since its inception, we have always put the "customer first" and "top quality" as our principle.

We specialized in selling Motorcycle parts and providing customers with various types of high-quality products. Our brand Bruce & Shark has enjoyed good reputation in America, Europe, Japan, Canada and Africa, covering more than 30 countries.

Our vision is to deliver high-quality Motorcycle parts products and sincere services to the world. Our main products are motorcycle mounted, fuel pump, stator, windshield, Seat Cover, motorcycle fairing. Welcome to our shop to choose products that are worth more for your Motorcycle!

Please Add me to your list of favorite sellers and visit often. Thank you for your business.

 

Shipping

Shipping Terms

International Buyers – Please Note: 1. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. 2. Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. 3.Buyers' Information: We strive our best to provide you the most reliable, affordable way of shipping service. But sometimes international delivery is highly depended on the courier company and local customs/duties. If you do not receive your item on time, please sent us ebay message immediately for further assistance. Thank you for your understanding. Terms

We stand behind everything that we sell and will do everything possible to assure you are satisfied. When you receive your purchase if you are not 100% satisfied, please sent me ebay message and we will do our best to make you happy. If you still want to return your purchase, simply ship the item(s) back to us and we will refund your original purchase price and the original shipping charge.  Buyers are responsible for the postal cost of returning the items.  We must be notified of the intent to return your item within 30 days of receiving the item.

Items returned must be in the same condition that they were received.

How to return 1,Please ask us for return address . 2,Shipping back the package .  The RMA#(Return Merchant Authorization Number = Your ebay ID) must be clearly written on the return package ,Otherwise the package will be refused.  3,Sent us the return tracking number.  4,All returns will be inspected prior to a credit being issued.

Returns

1:Returns are accepted within 60 days of purchase. 2:All returned items MUST BE in the original packaging. 3:We will be happy to assist you if if any item needs to be returned or replaced 4:Please don't open a return request before contacting us first to solve, many thanks.

Contact Us

If you have any questions, our Customer Service staffs welcome you to sent me ebay message.  We strive to answer all questions and resolve any problems as quickly as possible.  Business Hours: Monday-Saturday 9:00-17:00 

Copyright © 2022 Tongtool
  • Condition: Used
  • Condition: For Professional Use, Don't accept the return
  • Brand: Bruce&Shark
  • Compatible Brand: For Canon
  • Compatible Model: TS5080 TS6020 TS6050 TS6051 TS6052 TS6080 TS5050 TS5051
  • Manufacturer Part Number: W002-D043
  • MPN: W002-D043
  • OEM code: QY6-0089
  • Type: Print head
  • Warranty Terms: 6 Month

PicClick Insights - Reufrbished Printer Print Head for TS5080 6020 6050 6051 TS6052/6080 QY6-0089 PicClick Exclusive

  •  Popularity - 0 watchers, 0.0 new watchers per day, 31 days for sale on eBay. 0 sold, 5 available.
  •  Best Price -
  •  Seller - 13,885+ items sold. 1.8% negative feedback. Great seller with very good positive feedback and over 50 ratings.

People Also Loved PicClick Exclusive