Specification | 40W | 50W | 60W | 80W | 100W |
---|---|---|---|---|---|
Input Voltage(V) | AC 220V+30V or AC 110V+20V (to be specified when placing order). | ||||
Maximum Output Voltage | DC25KV | DC25KV | DC28KV | DC35KV | DC40KV |
Maximum Output Current | DC20mA | DC20mA | DC23mA | DC28mA | DC38mA |
Isolation Withstand Voltage | Input-output, input-enclosure: AC2000V-10mA-60s; negative pole of output connected to enclosure. | ||||
Protection | with well-grounded enclosure, output circuit of power supply can be open for short time (but arc between positive pole and enclosure should be avoided) | ||||
Response time | (from time of input being available to the output current being up to nominal value): ≤1ms. | ||||
TTL Voltage Level Control | effective voltage level can be high or low through setting. | ||||
Protection switch | for detection of cooling water, to protect laser device; or activate with enclosure is opened. | ||||
Laser Power Adjustment | (1) by adjusting the output current of power supply through resistor; (2) through PWM control (magnitude being TTL voltage level). | ||||
Environmental Requirements | temperature (-10~ 40℃), relative humidity ≤85%. |