AM-10 Pneumatic Crimping Machine Tools for Kinds Terminals w/ CE certification
WATCH THIS ITEM EMAIL A FRIEND Product Description
Accessories:
One die set, one foot air valve, two air pipes.
Usage:
1. Put the terminal in relevant tool month firstly.
2. Put the stripped insulated conductor into the terminal, push the foot air valve, loose it after crimping well.
3. Cut off gas supply, dismount the fix bolts on the clamp with the L spanner.
4. Replace a desired clamp and screw down the bolt again.
Maintenance:
1. Lubricate all mechanical moving joint before operation to increase their service life.
2.
Since the product is pneumatic device, do not operate or store it in
environment with high or low temperature and high humidity.
3. Please
keep it clean and dry before storage to avoid rusting. Mount dust caps
at the gas inlet and outlet or adopt other measures.
Replace clamps:
1. Cut off gas supply.
2. Dismount the fixed bolts on the clamp with L spanner.
3. Replace a desired clamp and screw down the bolt again.
Assembly clamps:
1. Since the clamps are used in pairs, please align them well.
2.
After assembly, press the foot operated gas valve slowly to make the
machine work at low speed in order to check the mounted die sets.
3. Before operation, please read the instruction carefully for operating method and technical parameters.
Working conditions:
1. Flow in the equipment: Compressed air
2. Operating condition and flow temperature: 5-60℃
3.
Medium in the cylinder should be filtrated by filter element above 40um
before injection(Viz. gas supply to the cylinder should pass the air
filter before operation).
4. Clean all gas hoses and fittings for connecting the pipe line to protect the cylinder.
5.
If the machine works in a low temperature environment, you should take
some measures to avoid freezing in the system. Medium in the cylinder
should be lubricated before operation (Viz. add an atomized lubricator
in the gas supply line; turbine 1# oil ISOVG32 is recommended).
All emails will be responded to within 12-24hours
PST Monday-Friday