For Mazda 2 3 6 CX3 CX5 CX8 CX9 Apple Carplay Android Auto Retrofit Kit

$299.99 Buy It Now or Best Offer, FREE Shipping, 30-Day Returns, eBay Money Back Guarantee
Seller: Top-Rated Seller mega-store-australia ✉️ (4,943) 99.2%, Location: Liverpool, NSW, AU, Ships to: WORLDWIDE, Item: 144537681114 For Mazda 2 3 6 CX3 CX5 CX8 CX9 Apple Carplay Android Auto Retrofit Kit.

NO SCREEN - CarPlay-AndroidAuto ADD ON Installation guide

[link removed by eBay]

Firmware MCU upgrade file

[link removed by eBay]

This kit includes 1 cable kit C922-V6-605A and USB Hub TK78-66-9U0C

The firmware MUST BE UPDATED FIRST before beginning the installation. If an older version of the CMU software is being used, the CarPlay/Android Auto-compatible USB hub may not be recognized. The software must be v70.00.21 or later. If not be sure to update the software. Once the CMU has been attached to the CarPlay/Android Auto-compatible USB hub, the software cannot be updated.

BEFORE you START, Switch CAR OFF, Then Remove Navigation 'SD Card' and LEAVE the SD Card OUT of the Car until the FINAL File is Installed, Then Car OFF again, then Insert SD Card. Then start car. The Navigation will work as normal when using CONNECT.

Stay connected to your world while keeping your eyes focused on the road with our smartphone screen mirroring kit. This upgrade kit enhances the MAZDA CONNECT infotainment system with Apple CarPlay allowing you to access your iPhone’s maps, playlists, contacts and compatible apps with your voice through Siri. Siri will also read incoming text messages and allow you to reply without taking your hands off the wheel. You can also navigate the features of Apple CarPlay with the optimally positioned multifunction Commander control. For Android users, this upgrade also adds Android Auto functionality.

Compatible with the following models

Fits: MX-5 2016 to 2020
Fits: CX-3 2016 to 2019
Fits: CX-5 2015 to 2020
Fits: CX-9 2016 to 2020
Fits: Mazda 2 2016 to 2019
Fits: Mazda 3 2014 to 2018
Fits: Mazda 6 2016 to 2020

Compatible with the following hosts

GENUINE Mazda CarPlay+Android Auto

INSTALLATIONInstructions are HERE!.....
This OFFICIAL Mazda CarPlay+AndroidAuto is for all Mazda Models which have Mazda Connect or MZD Connect, these
Installation Instructions MUST BE Followed Exactly or you will never get CP/AA to work. CP/AA comes together
as ONE total Installation, these TWO all new Interfaces cannot be separated, amended or deleted.
All of your existing Mazda -MZD Connect User/Display FEATURES still remain and still function as normal.
The following Genuine MAZDA details is for current Mazda's Worldwide using factory installed MAZDA Connect or MZD
Connect Colour Touch-screen, your existing New Car Warranty is not affected.
See this image directly Below of the CONNECT User Interface (UI), IF your MAZDA has this Design of Start Screen then YES this
Genuine CarPlay and AndroidAuto RETRO Upgrade is for Your MAZDA if you want to do a self or home installation

BELOW Picture is the End Result AFTER you have installed the 70.00.335C FIRMWARE (the correct Region) FIRST,
And then RUN+USE this new 70s FIRMWARE, and then INSTALL the TWO NEW Genuine Mazda Parts in PINK LAST.

MAZDA Genuine Parts is precisely for the Model Years from 2014 to Today which covers MAZDA 2, MAZDA 3, MAZDA 6#,
MAZDA CX-3, CX-5#, CX-8, CX-9 and MX-5/Miata/RF.
#This Genuine Mazda CP/AA Retrofit Parts Kit and Firmware/Software is not for 1st Generation of Mazda CX-5 and Mazda 6
using the factory TomTom in-Dash Navi.
NOTE: IF your NEW 2019~ Mazda Models (listed above) DOES NOT come Standard with Factory Fitted CP/AA but has 'any'
Version of 70.00.xxxx Firmware already installed from MAZDA Factory then ALL you need to purchase and then install are the
TWO Mazda Parts Listed below in PINK for your Region to get fully working CP/AA.
These Details and Parts Do NOT apply to ALL NEW Next Gen 2019 Mazda 3 (BP) or 2020 Mazda CX-30 (DM).
All you need to know is written here, with all the Links to download files, tips and instructions,
Please Follow these Details 100% exactly. DOWNLOAD LINKS BELOW in LIME GREEN, Click on..
YES You can also install this New Updated 70.00.352B Firmware (Region specific) ONLY Without doing the Hardware
Installation of the two New Genuine Mazda Parts.
By installing this new 70’s Firmware ONLY your car will have the very latest available CONNECT Operating System
and is FUTURE CP/AA READY...which can be done at any later date or never. 
See Changelog .Pdf in Server for all the current bug fixes and features updated for 70.00.352B Firmware.
IF later you want a working CP/AA Feature you still MUST install the TWO New Genuine Mazda Parts.
********************************
Below will show you how to and where to go to get the Genuine Mazda FIRMWARE Files from for free and where to download
the Video's and .Pdf Instructions. Modfreakz hosts all in his Hi-Drive Server.
Purchase is ONLY for GENUINE Mazda CarPlay with AndroidAuto and WILL NOT WORK without Installation of new 70's
Firmware FIRST and THEN the TWO ALL NEW Genuine Mazda Parts installed Second and Third . .. in that ORDER ... PERIOD! 
********************************
New revised FIRMWARE UPDATE INSTRUCTIONS.Pdf is Now in SERVER .....
New SINGLE File 70s FIRMWARE is Now Out* ......
New CHANGELOGs .Pdf List of changes and fixes is also now in Server.
*Method in these new Updates are now ONLY a Single 'UPDATE.up' File to Run.
No more separated Fail-safe + Reinstall.up files, Now ONLY ONE 'update.up' File.
You Select either “Reinstallation Package” or ''Update Package'' AFTER file 'SEARCHING' from
your USB Mounted ‘USB FLASH DRIVE' which contains the correct 70.00.352B File for your Region.
**********************************
ALL the other New Mazda Parts are a MUST DO Requirement as the process of adding and the installing of CP/AA Firmware and
the MUST have Genuine Mazda Parts has NOT Changed. DO NOT BUY or USE any other systems 'put together last year' as this
WILL corrupt the use of this very latest Genuine Mazda UPDATED 70s FIRMWARE listed below.
NOTE: There are some cheap options to separately install AndroidAuto ONLY without CarPlay and the 2 New Mazda Parts Listed
Below in PINK, I strongly advise NOT to go down this route as you must use the OLD and Outdated 59 Firmware which is buggy
and at times very unreliable with communication errors infecting OTHER working Systems Hardware inside your car like, engine,
IC control modules or display screen.
SEE the long newly added CHANGELOG List, you should only use latest Mazda Firmware or you will have issues as listed in the
Changelog. The GENUINE Mazda Firmware here is Free and the Genuine Mazda Parts are not that expensive and Mazda is still
maintaining Firmware updates for quite a few more years.
********************************
Read the 'READ-ME' WARNINGS, PLUS all the Firmware Numbers and Genuine Mazda Part Numbers for YOUR Correct REGION + Free
Download Links are all below.. …DOWNLOAD LINKS BELOW in LIME GREEN, Click on..
********************************
You MUST install all New MAZDA CarPlay/AndroidAuto 70.00.352B FIRMWARE FIRST (as .up File) for your Region.
BEFORE You remove Trim pieces and BEFORE You INSTALL New USB Cables and
BEFORE You INSTALL New 'C' AUX Module Unit (one with orange label).
********************************

********************************
SEE the GENUINE Mazda Part Numbers (You Need One of Each) listed below Page 5 in PINK for your Region.
ONLY USE CORRECT Firmware (.up File) for Your Region, either one of EU N or NA N or 4A N (ADR)..... 
JP M (Japan) or MAZ (Generic) or CH N (China) Firmware is NOT available as we have no Mazda Dealer file donors.
********************************
REPEAT......
Install run New FIRMWARE 70.00.352B FIRST.
See the *MAZDA FIRMWARE UPDATE PROCEDURE WORLDWIDE*.pdf Instructions. (Download it and Print it Out).
Then MUST install the NEW Genuine Mazda Parts LAST.
ANY OTHER order of Installation and NOTHING will work.
********************************
Genuine CP/AA will NOT work without these new MAZDA Parts correctly installed...see PINK Mazda Part Number List Below.
1. New USB Data Cable Set.
2. New AUX Hub Module.
This Process means doing 3 separate tasks to get it working.
1. New Mazda 70.00.352B.up Firmware install and use in car FIRST.
2. New Mazda USB Data Cable Set.
3. New Mazda AUX Hub Unit, MUST be the 'C' Hub (the Plain, A, or B will NOT Work).
********************************
THERE ARE NO SHORT-CUTS TO THIS CORRECT PROCESS.
GET YOUR MAZDA DEALER TO INSTALL IF YOU CAN NOT DO THIS.
********************************
WHAT 'OS VERSION' NUMBER AND 'REGION' CODE IS IN MY MAZDA-MZD CONNECT RIGHT NOW...?
Latest available Firmware 'OS Version' is listed separately BELOW for each of the 3 main Regions worldwide, to see yours now go
cars Touchscreen, Touch RED ROUND ''Settings'' Icon, then Touch top right SILVER ''System'' TAB, scroll down to ''About''
Touch it, scroll down to ''Version Information'' Touch it, this screen should tell you your 'OS Version' Number and Region Code
so you know which 'update.up' Region File to Download to your PC Desktop (ONLY USE A INTEL WINDOWS 10 PC).

No REGION Code Shown...?
If your Touchscreen shows No Region Code like NA N or EU N or 4A N or MAZ (see Pics with Red Circles) go to MAZDA
FIRMWARE UPDATE PROCEDURE WORLDWIDE.Pdf Page 2 and bring up the Diagnostic TEST SCREEN and Enter/Press Code 53
this will reveal your Region Code and OS Version Number so you can Select and Download the 100% Correct New Updated
Firmware OS Version for your Mazda Model and Country.
Example Pic of outdated 59.00.445 Firmware with No Region Code displayed.

Example Pic outdated 51.00.351 Firmware with 'MAZ' (Generic) Region Code when using TEST SCREEN.

********************************
https://my.hidrive.com/share/hsodpqja.l#$/Mazda%20CONNECT%20Firmware
GENUINE MAZDA DEALER FIRMWARE: Region Specific Listed Below.
GENUINE MAZDA PART NUMBERS: One Part of Each Required in PINK.
********************************
For Region NORTH AMERICA - USA, Canada, Mexico, Puerto Rico, known as 'NA N' on your Touch-screen.
1. FIRMWARE Version for 'NA N' for CP/AA update.up file is....
cmu150_NA_70.00.352B_update.up file MUST Install FIRST 920MB 30-35 Mins.
https://my.hidrive.com/share/hsodpqja.l#$/Mazda%20CONNECT%20Firmware
2. C922-V6-605A New USB Data Cable set of MUST Install SECOND.
3. TK78-66-9U0C New AUX Module Unit, MUST be Installed LAST.
********************************
For Region EUROPE - Albania, Andorra, Austria, Belarus, Belgium, Bosnia, Bosnia Herzegovina, Bulgaria, Croatia, Czech,
Denmark, Estonia, Finland, France, Germany, Gibraltar, Greece, Hungary, Ireland, Israel, Italy, Kazakhstan, Kosovo, Latvia,
Liechtenstein, Lithuania, Luxembourg, Macedonia, Malta, Moldova, Monaco, Montenegro, Netherlands, Norway, Portugal,
Poland, Romania, Russia, San Marino, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey, Ukraine, United Kingdom,
Vatican, known as 'EU N' on your Touch-screen.
1. FIRMWARE Version for 'EU N' for CP/AA update.up file is....
cmu150_EU_70.00.352B_update.up file MUST Install FIRST 2.3GB 45-50 Mins.
https://my.hidrive.com/share/hsodpqja.l#$/Mazda%20CONNECT%20Firmware
2. C830-V6-60Z New USB Data Cable set of MUST Install SECOND.
3. TK78-66-9U0C New AUX Module Unit, MUST be Installed LAST.
********************************
For Region ADR - Australia, Christmas Island, Fiji, Indonesia, Kangaroo Island, Malaysia, New Zealand, Oceania,
Papua New Guinea, Philippines, Saudi, Singapore, South Africa/Africa, South America, South Asia, Tasmania, Thailand, known as
'4A N' on your Touch-screen.
1. FIRMWARE Version for '4A N' or (ADR) for CP/AA update.up file is.... 
cmu150_ADR_70.00.335C_update.up file MUST Install FIRST 1.8GB 40-45 mins.
https://my.hidrive.com/share/hsodpqja.l#$/Mazda%20CONNECT%20Firmware
2. C924-V6-605 New USB Data Cable set of MUST Install SECOND.
3. TK78-66-9U0C New AUX Module Unit, MUST be Installed LAST.
********************************
REPEAT, You must install these New Mazda Parts in correct order or CP/AA will NEVER WORK.
ONLY install the Cars Correct Region Firmware, either NA N or EU N or 4A N
********************************
The MUST have ALL NEW ''AUX Hub Module'' TK78-66-9U0C is the exact same Mazda Part and Part Number Worldwide and for
ALL Mazda's, repeat ALL Mazda's with MZD/Mazda Connect Worldwide wanting to Convert to CP/AA.
NOTE: There are 3 Different MUST have Part Numbers for the ALL NEW ''USB Cable Set''. We have Confirmed that it does not
matter 'which' Part Numbered USB CABLE SET you use as essentially there is no difference as ANY 1 of the 3 CABLE SETS WILL
INSTALL AND WORK PERFECTLY.
********************************
NOTE: DOWNLOAD FILE as is from THE SERVER AS .up FILE (By Downloading ONE File at a time ONLY to Desktop) AND THEN
PASTE ONTO Clean USB FLASH DRIVE, DON'T COMPRESS or ZiP, THERE MUST ONLY BE ONE .up File on Your USB Flash Drive
when you begin the CMU Firmware update process. ONLY use a Windows 10 PC to Download to USB Flash Drive.
********************************
WHAT is the Current or Latest Firmware to use….?
When you See/Read always use the Latest, Newest, Updated or Best Firmware over the years Mazda with Connect has Updated
Firmware many times to Fix Issues and Bugs like any Firmware/Software used for your electronic Devices.
So what do you use??, the Higher the Number string the LATER/LATEST the Firmware, anything which is a Lower Number is
called Older or Outdated Firmware.
Examples: 29.00.000A, 46.00.250, 51.00.351, 56.00.513, 59.00.545, 70.00.021A, 70.00.100A is an Old and Outdated Firmware not
used by ANY Mazda Dealer today.
(still Must use 'a' 70's Firmware for any and all Genuine Mazda CarPlay A/Auto install).
YES, Even If you Do Not Do the Hardware Changes shown below in for 100% working CP/AA you can still update to
70.00.335C to fix resolve current issues/bugs with MAZDA-MZD CONNECT...see Changelogs list in server…..
ANYTHING Below 70.00.352B is technically Older and Outdated and should NOT be used unless Directed to do so (Only BM
Mazda 3's still on Stage 1 22.00. to 33.00.), ...ALL OTHER Mazda's have a Stage 2 Firmware out of Factory which is any 42.00.xxxx
or Later/Higher Firmware like 46, 51, 55, 56, 59 or even latest 70's.
********************************
BASICALLY IF YOU WANT the LATEST FIRMWARE for your Mazda-MZD Connect just install 70.00.352B over what you are using
now.....JUST MAKE CERTAIN you use the Correct AVAILABLE 'OS Version' for your 'REGION', like 'NA N' or 'EU N' or '4A N'.
To Find what Mazda's Firmware 'OS VERSION' and 'REGION' is in your car today go to above to reveal the ‘OS Version’ Number
and ‘Region’ Code which you are currently using......
.....As you can see from dash image below this Owner from his cars CMU 'File Searching' has the very Latest 70.00.335C 4A N (ADR)
Firmware already installed out of the Factory, so in his case all he has to install for a 100% Working CP/AA are the Two Genuine Mazda
Parts listed in PINK text for his 4A N (ADR) REGION.

********************************
Here is the Link for a FULL LIST of the OFFICIAL Mazda Details, this Server is hosted by our friend Modfreakz.
JUST USE the LINKS Above IF you Only want to Install the very LATEST Mazda Firmware for your Cars CONNECT.
https://my.hidrive.com/share/hsodpqja.l#$/Mazda%20CONNECT%20Firmware
CLiCK on Folder To reveal Content, CLiCK on Content To download what you want One File at a time.
BEST to JUST DOWNLOAD AS ONE FILE AT A TIME, This Way the FIRMWARE DOWNLOADs as a .UP file Only,
AND NOT AS A WRONGLY COMBINED Set Of Compressed FILES in a .Zip Format, CMU will not see the .Zip File.

1. Listed in this Server are the CarPlay-AndroidAuto INSTALL Folder, which has all the TrimRemoval Instructions and How To Install the
USB DATA Cables (set of two). How to Reveal the CMU with Pull Apart Videos and newly added FULL INSTALL mp4 Videos, Plus how to
correctly plug in the all New USB Cable Pairs in all New Aux Hub and @ existing CMU rear-end grey twin plugs.
2. MAZDA FIRMWARE UPDATE PROCEDURE WORLDWIDE.Pdf 
Download these instructions and also Print Out and follow 100% for any and all Firmware Updates.
3. Then all important FIRMWARE Download for your Region…
All use 'a' version of 70.00.352B for CP/AA Upgrade.
EU N is for all of Europe and UK.
NA N is for North America, USA, Canada, Mexico.
4A N is for Australia, NZ, Southern Hemisphere, South Asia, Oceania.
********************************
You MUST follow the Install Instructions in the correct order and understand the PROCESS BEFORE you start.
NEVER TURN CAR OFF, START ENGINE or STOP FIRMWARE UPDATE PROCESS ONCE YOU START IT, ALLOW up to 60 Minutes, or
DO NOT DO IT !
********************************
YES, WHILE YOU ARE DOING THE MAIN 'update.up' FIRMWARE INSTALLATION YOU WILL VISUALLY SEE YOUR TOUCHSCREEN
either Flicker, Turn Off-On, Flash White, Grey or Black.....NOTHING IS WRONG THIS IS 100% NORMAL.....DO NOT
PANIC.....OK!.....These FIRMWARE INSTALLATIONS takes your TIME!!....About..
NA N About 25-30 minutes....
EU N About 40-45 minutes....
4A N About 35-40 minutes....
See Below Instructions plus the Screen Pic on HOW TO KEEP 'CMU' ON...a MUST Do!
********************************
To CLEAR UP some Questions on the new FIRMWARE INSTALLATION.Pdf from MAZDA, DO NOT, repeat DO NOT Skip Any of the 30
numbered Tasks as you do not know more than Mazda.
WHEN You do ANY Connect Firmware Updating, YOU NEVER have Engine Running or Full IGNITION ON, ONLY ACC Ignition should ever
be ON, that is Amber light inside S/S Switch.
NEVER, Touch or Put YOUR FEET ANYWHERE on your Pedals during the First Starting of the Firmware Update Process.
The STEP ON of 'A' Pedal is ONLY done during the update.up Firmware loading and ONLY to Re-SET the internal CMU clock so to keep
CMU staying ON and NOT auto turn Off. 
STEP ON 'A' Pedal Once every 15 to 20 minutes MAX, to keep your CMU on.

TO BEGIN: Keys Transmitters with you. To get to ACC Ignition, NO FEET ON Pedals, and PRESS S/S (Start/Stop) Button ONCE ONLY. This
puts CMU ON and car into ACC Ignition mode ON.
NEXT: Your RADIO (AM or FM) MUST BE ON.
NOTE: When Instructions says to Turn OFF or Re-Start and or put CMU to-sleep for a Lock Down and Walkaway, you PRESS S/S Button
TWICE QUICKLY, that is One after the other, you may see the Green light inside S/S Button for a second, that is OK, your car will
completely Shut Down, DO NOT PUT FEET ON PEDALS DURING SHUT DOWN, Next: EXIT CABIN, Lock all Doors and Walk away with All
Keys and any electronics, wait for 6 minutes and return to car with Keys to unlock and continue.
NEVER have Full IGNITION ON, that is All Lights ON under the Dash Meter Hood and or Green Light inside S/S Button, this is A real Full
Ignition ON and must be avoided by doing it correctly from the start.
DO NOT Have Engine Running at all During FIRMWARE Update PROCESS and I do not care how many times you may have done
Firmware updates before and all has been OK, ENGINE RUNNING IS NOT THE PROCESS by Mazda Today or Ever.
Engine Running means Engine ECU/PCM is communicating with IC (Instrument Cluster) and the CMU, any live communication can BRICK
your CMU, this is partly why the Full NEW shut down is required in Firmware Update Procedure Pdf Number # 7 task.
DO NOT Skip ANY of 'FIRMWARE UPDATE PROCEDURE' # 1 to # 30 in .Pdf.... Unless directed to skip.
NOTE: IF your Car Battery is Old or bit Slow then connect a Trickle Charger Battery Tender to your Car Battery.
TURN OFF: Any and all accessories, lights, fans, demisters or anything that can drain power from car battery.
YOUR FIRST TIME….?
BEFORE you Start this Firmware Update PROCESS, Do a trial experiment with the Start/Stop (S/S) Button by pressing 'Twice
Quickly' and see what happens, Press Once and see what happens. Understand the functions, it is not that difficult, look at
Mazda 3 CP/AA Install Videos.
********************************
USB FLASH DRIVE/THUMB DRIVE Quality WARNING:
WHEN BUYING OR USING Any USB FLASH DRIVE (Thumb Drive), DO NOT USE or PURCHASE CHEAP ''NO BRANDED'' USB FLASH DRIVES
USUALLY Made in China as these CHEAP DRIVES HAVE BEEN KNOWN to STOP and FAIL DURING CMU FIRMWARE File Installation which
can Brick Your Cars CMU. 
Do Not Take That RISK to SAVE A FEW $$$s, BUY AND USE A KNOWN BRANDED NAME LIKE Sandisk, LG, Samsung, Sony or Kingston with
an external flashing LED is great to see the new .up File is loading into CMU.
********************************
OPTIONAL USB Flash Drive DURABILITY TEST:
TESTER App now in Server 'x H2testw USB Drive Tester' in Folder 'H2testw' with Pdf Instructions for USB Drive Tester to Write/Read/Speed
Test and Report on your USB Flash Drive BEFORE you use it., DELETE all Test Files written Before you begin to use Flash Drive.
You may find out too late that your USB Flash Drive has stalled or stopped. Why you should test your USB Flash Drive PLUS do the .up
file CheckSum Hash# Value Testing of the newly Downloaded 70's Firmware File BEFORE You Use it in your USB Flash Drive device.
********************************
BE AWARE THAT DOWNLOADING AND COPYING .up FIRMWARE FILE Via any MAC (Apple) PC CAN and DOES CREATE ISSUES
WITH Cars CMU SEEING THE LARGE update.up FILE on Your USB FLASH/THUMB DRIVE.
You should ONLY use a WINDOWS 10 PC for ALL Downloading and Transferring update.up File onto your Clean FAT32 Formatted USB
FLASH DRIVE. 
Any Mac PC will auto install 'Hidden Files' onto your Flash Drive which then STOPS your cars CMU from seeing the new
Firmware update.up File on your Flash Drive during your CMU file searching task.
Mac Users 'can try' using a Cleaner to remove Hidden/Invisible Files on your USB Flash Drive, but it is not always successful. Seriously just
use/borrow a 100% Windows/Intel PC and re-format your USB Flash Drive on this W-PC and Download update.up File again. IF you are
still having issues with CMU seeing your USB Flash Drive try using another different Flash Drive of 16GB is good. 
Fact: Automotive Diagnostics are only meant to be done with and on a Windows PC. The Mac OS is not supported by the
wholesale/manufacturing Auto Industry with any car make.
IF you continue to have problems of CMU NOT Seeing your Flash Drive Files, use another USB Flash Drive, problems are either the use
of Apple PC’s or Flash Drive brand or age or is faulty, try reformatting Flash Drive to FAT32 16GB Only.
DO NOT Use Flash Drives larger than 16GB. 32GB or 64 GB your CMU will not see your device as it is too large for it to search.
********************************
FOR EARLY Mazda 3's ONLY:
Old 31.00.100A Firmware 'if Needed' is ONLY used for the very early 2013-2015 Mazda 3's (BM) for a FIRST Stage 1 Update, NO
other Mazda needs it.
ALL OTHER MAZDA Models NOW ONLY NEED the 70.00.352B Installed.
********************************
MAKE CERTAIN you understand the upgrade PROCESS 100% and DO NOT ALLOW CMU to ever go to sleep (turn-off), DO NOT
Start Engine Until 100% Finished!
********************************
....NOTE:
From all 70.00.335C there are No more separated Fail-safe.up + Reinstall.up files, ONLY the one SINGLE 'update.up' File. 
AFTER Touchscreen file 'SEARCHING' from Your pre-loaded SINGLE 70.00.335C update.up file in your quality branded 'USB FLASH DRIVE'
You then Select either “Reinstallation Package” or ''Update Package'' the rest of this Video Install process has NOT Changed.
....NOTE:
After 70.00.352B Firmware is installed you can run it and can use it in car normally, BUT YOU WILL NOT SEE CP/AA availability on the
Connect screen Settings, etc. 
Only UNTIL and AFTER you Install the TWO NEW Genuine Mazda Parts LAST.
Upgrading for the FIRST Time MUST BE done with OLD PARTS Still Working in car. Your cars NEXT and Future Firmware Releases
are done with new parts installed as this ONLY applies for the very FIRST OS Version install of 70s.
WARNING:
If you install NEW Mazda Parts FIRST You CAN NOT Install the NEW 70s Firmware. YOU WILL have to re-install the Two OLD
PARTS again BEFORE you can INSTALL the New 70's Firmware. (Firmware FIRST - New Parts LAST).
BELOW Video:
Here is a US Mazda Owner Installing NA N now old Two File Set-Up Firmware 70.00.100, I cannot fault his method and like his CheckSum
# testing of Files on USB Drive. All EU N and 4A N Update.up File takes longer to install as they are a much larger file in size.
He did have his Phone Bluetooth On, it should be OFF during any updating..
70 Firmware Install Video
Time (how long?) Mazda USA allows 1.5 Hours for their Dealers labor to install kit on a 2018 Mazda 6. Mazda Motors Europe allows 1.4
Hours labor for all models to install.
********************************
''w TROUBLESHOOTING'' PDF's Added to Server…
Also...these Two Common Installation Problems....
CP/AA Not Working AFTER you Installed the 2 New Parts ?
1. You Did NOT install then Run NEW 70's Firmware First and BEFORE you Removed OLD Parts (old Aux Hub, old USB Cable) and installed
the all New Parts (Hardware) ?.
2. No GPS or Seeing 'Greyed Out' Apple Car Play and Android Auto Touchscreen Select?, make Certain your BLUE GPS Cable PLUG has
not accidentally UNPLUGGED when re-installing your CMU, re-check ALL Cable END Plugs on the REAR of CMU.
..MAKE SURE YOUR OWN PHONE Apps' and OS ARE ALSO UPDATED..


  • Condition: Brand New
  • Type: Car Play
  • Features: Android Auto
  • Brand: Unbranded

PicClick Insights - For Mazda 2 3 6 CX3 CX5 CX8 CX9 Apple Carplay Android Auto Retrofit Kit PicClick Exclusive

  •  Popularity - 52 watchers, 0.1 new watchers per day, 696 days for sale on eBay. Super high amount watching. 13 sold, 1 available.
  •  Best Price -
  •  Seller - 4,943+ items sold. 0.8% negative feedback. Top-Rated Plus! Top-Rated Seller, 30-day return policy, ships in 1 business day with tracking.

People Also Loved PicClick Exclusive