M5 M6 M8 M10 Metric Hex Flange Bolt Class 8.8 Serrated Set Screw Zinc Plated

$4.80 Buy It Now, FREE Shipping, 30-Day Returns, eBay Money Back Guarantee
Seller: Top-Rated Seller fastenersgalore1 ✉️ (80,811) 99.8%, Location: Murarrie, QLD, AU, Ships to: AU, Item: 293824721857 M5 M6 M8 M10 Metric Hex Flange Bolt Class 8.8 Serrated Set Screw Zinc Plated.
  • Store
  • |
  • About Us
  • |
  • Terms
  • |
  • Payment
  • |
  • Delivery
  • |
  • Returns
  • |
  • Technical
  • |
  • Contact
ALL CATEGORIES
Technical Specification
Product Hex Flange Bolt Serrated
Head Type Hex Head
Bolt Size Choose from the dropdown above
Thread Pitch Choose from the dropdown above
Thread Type Coarse
Length - from under the head Choose from the dropdown above
Thread Length Fully Threaded
Across Flats APPROX Choose from the dropdown above
Flange Diameter APPROX Choose from the dropdown above
Material High Tensile Carbon Steel
Class 8.8
Finish Zinc Plated
Brand Hobson
Quantity Choose from the dropdown above
Product Information
  • Hex Flange Serrated Bolt Only High Tensile Class 8.8 Zinc Plated has a hexagon head with a built-in washer and under head teeth like serrations which bite into the surface to help prevent loosening. The built-in washer acts to distribute the clamping load over a greater area and the wide flange head is designed to provide the same holding power as a washer. Can be used to fasten objects together by inserting the bolt from the one end and securing it with either a nut on the other end or into a taped hole
  • Material / Coating: Zinc Plated is the most common fastener of plating due to its the low cost and shinny bright silver finish. A thin layer of zinc is applied by either electroplating or mechanically. It is intended to be used internally. Whilst some people use it externally it isnt recommended if corrosion is a concern. If you want a fastener that will withstand the outdoor elements choose from our Stainless steel range
  • Grade v Class Difference: Imperial fastenings are referred to as grades, and metric fastenings are referred to as classes. Both have marking systems that make it possible to determine grade and class. An example is a ½” UNC bolt with 5 lines on the head is grade 8 and 3 lines is grade 5, both are regarded as high tensile. Metric bolts are slightly different, if it has 4.6 then it is mild steel and 8.8 is high tensile. The markings on a stainless fastener indicate the grade of material and strength, e.g. material G304 grade will have one of the following markings: A2-70, G304, A2, 304 and G316 grade stainless will have one of the following: A4-70, G316, A4, 316
  • Thread Pitch (Metric): Pitch means the distance between the peaks of two threads along a screw, bolt, or fastener expressed in millimetres (mm). Used when referring to Metric parts. For example, a thread pitch of 1.50mm means that the distance between one thread and the next is 1.50mm
  • Fastener length: is generally measured from the point where the surface of the material will be when the fastener is installed to the end of the fastener. Thus, fasteners with heads that sit above the surface are measured from under the head to the end of the fastener, while fasteners that sit flush with the surface are measured from the top of the head to the end of the fastener
  • A guide to determining the approx. thread length, please note this is only a guide: upto and including 5" = 2 x diameter + 1/4", over 5" up to and including 8" = 2 x diameter + 1/2", over 8" = 2 x diameter + 1"
  • Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you see a problem with our specifications please contact us
  • Dimensions: Our stock is sourced from various suppliers, therefore differences may exist between batches such as height, width, visible stamped markings, appearance or actual finish
  • Photos: are of the product but may not be the actual diameter, height, width, length you may require, always refer to the size in the description and additional specifications data provided prior to ordering
  • Buy with confidence: ⇒ 8+ years experience selling online, > 15,000 stock lines, > 40 million pieces ex stock in Brisbane QLD
  • Prices: Include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
  • Need help? Message us through eBay
Suppliers
BOLTS - METRIC BOLTS - IMPERIAL SOCKET SCREWS - METRIC SOCKET SCREWS - IMPERIAL MACHINE SCREWS - METRIC MACHINE SCREWS - IMPERIAL NUTS - METRIC NUTS - IMPERIAL WASHERS - METRIC WASHERS - IMPERIAL HARDWARE TOOLS NUTSERTS - FLANGE NUTSERTS - COUNTERSUNK NUTSERTS - RUBBER / WELL NUTS FASTENER KITS METAL SCREWS - BUTTON METAL SCREWS - COUNTERSUNK METAL SCREWS - DECKING METAL SCREWS - FLAT METAL SCREWS - HEX METAL SCREWS - WAFER TIMBER SCREWS - BUGLE BATTEN TIMBER SCREWS - BUTTON TIMBER SCREWS - CHIPBOARD TIMBER SCREWS - COUNTERSUNK TIMBER SCREWS - DECKING TIMBER SCREWS - HEX TIMBER SCREWS - PARTICLEBOARD TIMBER SCREWS - PLASTERBOARD TIMBER SCREWS - WAFER SELF TAPPERS - BUTTON SECURITY SELF TAPPERS - CSK PHILLIPS SELF TAPPERS - CSK SECURITY SELF TAPPERS - MUSHROOM PHILLIPS SELF TAPPERS - PAN PHILLIPS MASONRY - DROP IN ANCHORS MASONRY - HOLLOW WALL ANCHORS MASONRY - NAIL IN / PIN ANCHORS MASONRY - SCREWS BOLTS MASONRY - SLEEVE ANCHORS MASONRY - SPRING TOGGLES MASONRY - WALL MATES MASONRY - WALL PLUGS MASONRY - WEDGE ANCHORS POP RIVETS - DOME POP RIVETS - COUNTERSUNK POP RIVETS - LARGE FLANGE ALL THREAD PINS & CLIPS DRILLING DRIVER BITS
ebay listing template design by
  • Condition: Brand New
  • Bolt Size & Length: M5 x 10mm (Full Thread)
  • Thread Pitch Metric Coarse: 0.80mm
  • Flange Diameter: 10.00 ~ 11.80mm
  • Across Flats: 7.78 ~ 8.00mm
  • Pack Quantity: 1
  • Head Style: Hex Washer Head
  • Drive Style: Hex
  • Material: High Tensile Carbon Steel Class 8.8 Zinc Plated
  • Grade: Class 8.8
  • Type: Flange Bolt
  • Product: Hex Flange Bolt Serrated
  • Australian Stock: YES, supplied & despatched ex Brisbane
  • Tax Invoice Supplied: YES
  • System of Measurement: Metric
  • MPN: BF88ZCM050010
  • Bolt Diameter: Choose from the dropdown above
  • Length from under the head: Choose from the dropdown above
  • Thread Length: Fully Threaded
  • Thread Pitch: Choose from the dropdown above
  • Thread Type: Coarse
  • Across Flats - AF: Choose from the dropdown above
  • Freight Free: FREE delivery anywhere in AUSTRALIA
  • Brand: Hobson

PicClick Insights - M5 M6 M8 M10 Metric Hex Flange Bolt Class 8.8 Serrated Set Screw Zinc Plated PicClick Exclusive

  •  Popularity - 116 watchers, 0.1 new watchers per day, 1,234 days for sale on eBay. Super high amount watching. 2 sold, 10 available.
  •  Best Price -
  •  Seller - 80,811+ items sold. 0.2% negative feedback. Top-Rated Plus! Top-Rated Seller, 30-day return policy, ships in 1 business day with tracking.

People Also Loved PicClick Exclusive