LINK ECU Plug in - MR2Link V1 - TST185X

$2,084.00 Buy It Now, $20.00 Shipping, 30-Day Returns, eBay Money Back Guarantee
Seller: ci_performance_parts ✉️ (226) 100%, Location: Lonsdale, South Australia, AU, Ships to: AU, Item: 285648469030 LINK ECU Plug in - MR2Link V1 - TST185X.

LINK ECU Plug in - MR2Link V1 - TST185X Easy to install. Affordable. Reliable. G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below. Designed for the 3SGTE engine in the models specified below. Please check your connector matches the header in the listed photo before purchasing. This ECU works for manual transmissions only. A Link Air Temp Sensor is highly recommended with this ECU Most factory features are supported. Check the features tab for I/O expansion options Suitable applications: Toyota MR2 (SW20) from 1989 to 1992 G4X PlugIn Key Features (where applicable):Up to 6D fuel and ignition mappingPrecision closed loop cam control (four cam, independent control)Sequential fuel deliveryDigital triggering, all OEM patternsOEM idle hardware supported5D boost control with three switchable tablesMotorsport features - antilag, launch, flat shiftContinuous barometric correction (on board)CAN portQuickTune - automated fuel tuningIndividual cylinder correctionUSB tuning cable includedStats recording into on-board memoryGear compensations for spark, boost and fuelReal time selectable dual fuel, ignition and boost mapsSync and crank sensors can be a combination of Hall effect, variable reluctance or opticalBoost control referenced to gear, speed or throttle position512 mega bytes data logging memoryStaged injectionKnock with "windowing"I/O Expansion Options:The following expansion connector inputs/outputs are provided: Expansion connector:Gnd Sensor Ground Only +5V Out Low Current +5V Supply DI 5 Digital Input for switching functions. DI 6 Digital Input for switching functions. DI 4 Digital Input for switching functions. An Volt 4 Analog 0-5V input An Volt 5 Analog 0-5V input An Volt 6 Analog 0-5V input An ignition expansion is provided allowing you to convert to a Direct Spark ignition system. Alternatively, these outputs can be used to drive auxiliary devices. The following pinout describes the available connections. Ignition Expansion:1 Ignition 1 2 Ignition 2 3 Ignition 4 4 Ignition 3

LINK ECU Plug in - MR2Link V1 - TST185X

Easy to install. Affordable. Reliable.   G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.   This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below.  Designed for the  3SGTE  engine in the models specified below. 
  • Please check your connector matches the header in the listed photo before purchasing.  
  • This ECU works for manual transmissions only.  
  • A Link Air Temp Sensor is highly recommended with this ECU 
  • Most factory features are supported. 
  • Check the features tab for I/O expansion options  

Suitable applications:  Toyota MR2 (SW20) from 1989 to 1992  G4X PlugIn Key Features (where applicable):
Up to 6D fuel and ignition mapping
Precision closed loop cam control (four cam, independent control)
Sequential fuel delivery
Digital triggering, all OEM patterns
OEM idle hardware supported
5D boost control with three switchable tables
Motorsport features - antilag, launch, flat shift
Continuous barometric correction (on board)
CAN port
QuickTune - automated fuel tuning
Individual cylinder correction
USB tuning cable included
Stats recording into on-board memory
Gear compensations for spark, boost and fuel
Real time selectable dual fuel, ignition and boost maps
Sync and crank sensors can be a combination of Hall effect, variable reluctance or optical
Boost control referenced to gear, speed or throttle position
512 mega bytes data logging memory
Staged injection
Knock with "windowing"

I/O Expansion Options:
The following expansion connector inputs/outputs are provided: 
Expansion connector:
Gnd                Sensor Ground Only  
+5V Out        Low Current +5V Supply 
DI 5                Digital Input for switching functions. 
DI 6                Digital Input for switching functions. 
DI 4                Digital Input for switching functions. 
An Volt 4        Analog 0-5V input 
An Volt 5        Analog 0-5V input 
An Volt 6        Analog 0-5V input 

An ignition expansion is provided allowing you to convert to a Direct Spark ignition system. Alternatively, these outputs can be uséd to drive auxiliary devices. The following pinout describes the available connections. 
Ignition Expansion:
1 Ignition 1 
2 Ignition 2 
3 Ignition 4 
4 Ignition 3 
    × × ×

    Buy now and save!

    Shipping info

    Click the Shipping & Payments tab above the listing description for more info

    Price: $20.00 (local shipping)

    Click the Shipping & Payments tab above the listing description for more info!

    Additional delivery notes

    PICK UP OPTION

    Sorry, our items are NOT available for pick-up.

    PAYMENT

    Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart.

    We accept payment via All Major Credit Cards (Visa, Mastercard, AMEX, Discover), Google Pay, PayPal, & Apple Pay (on mobile & eBay App).

    Thank you for shopping with us on eBay!

    Additional Information

    No additional information at this time

    Ask seller a question

    You might also like

    PWR UNIVERSAL Water To Oil Engine Oil Cooler With 44mm Water Outlets

    PWR In-Line Engine Oil Coolers 12" - 2" x 3" x 12" - 44mm

    ROSS PERFORMANCE - Suits Nissan VK56 Harmonic Damper

    TURBOSMART Bubba Plumb Back 2.0" Silver Contact

    To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.

    Ask seller a question

    © CI Performance Parts

    Shipping & Payments

    Shipping is a flat rate across AU at a rate of $20.00

    Payment

    Accepted Payment Methods

    Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart.

    We accept payment via All Major Credit Cards (Visa, Mastercard, AMEX, Discover), Google Pay, PayPal, & Apple Pay (on mobile & eBay App).

    Thank you for shopping with us on eBay!

    Returns

    Returns are accepted

    Items must be returned within 30 days of the auction ending

    Buyer will pay for return shipping.

    eBay integration by
    • Condition: Brand New
    • Brand: LINK ECU

    PicClick Insights - LINK ECU Plug in - MR2Link V1 - TST185X PicClick Exclusive

    •  Popularity - 1 watcher, 0.0 new watchers per day, 78 days for sale on eBay. Normal amount watching. 1 sold, 1 available.
    •  Best Price -
    •  Seller - 226+ items sold. 0% negative feedback. Great seller with very good positive feedback and over 50 ratings.

    People Also Loved PicClick Exclusive