Kibblewhite Valve Guides Guide Suzuki DRZ400 LTZ400 DRZ LTZ 400 DR LT Z400

$92.65 Buy It Now, Click to see shipping cost, eBay Money Back Guarantee
Seller: xcbob ✉️ (139,883) 99.7%, Location: Winfield, Pennsylvania, US, Ships to: US & many other countries, Item: 192068924552 Kibblewhite Valve Guides Guide Suzuki DRZ400 LTZ400 DRZ LTZ 400 DR LT Z400.

Kibblewhite valve guides, all 4, for a 00-17 drz400 ltz400. Picture is for reference only. Check my other items. Can't find what you are looking for? Just type in what you need in the search box above and click search.   Shipping: Calculated shipping and handling amount. Upgraded shipping available. Will ship multiple items for a reduced price. The more you buy, the more you save. All items in STOCK and shipped same or next day after payment Monday through Friday.

Payment: IF BUYING MULTIPLE ITEMS REQUEST A TOTAL BEFORE PAYING! IF YOU DO NOT REQUEST A TOTAL AND MAKE PAYMENT THERE WILL BE NO REFUND. YOU MUST REQUEST A TOTAL BEFORE PAYING. PA residents must add 6% sales tax. Always include your FULL shipping address. All payment and tracking information is automatically emailed to you. Payment expected in 5 business days. Outside of US buyers are responsible for any tax or fees your country charges you, and no item will be shipped as a gift.

KIBBLEWHITE TECH SUPPORT / FAQ

6. When I install valve guides how much interference should I allow between the OD of the guide and the valve guide hole in 

     the cylinder head?

KPMI® recommends that all valve guide hole(s) prior to guide installation be free of gall-marks and are round and parallel. Professional inspection devices are required to perform these determinations. Additionally, Honing, reaming and or boring a valve guide hole may be necessary operations when a valve guide hole needs to meet this criterion. The following recommendation(s) are for any combination of bronze or cast guides and aluminum or cast iron heads.

                       •  .0015" to .0025" - Intake and Exhaust

                       •  KPMI® does not agree that an o-ring can allow for the necessary fit required to create optimum heat transfer and or fitment.

                           Always consult with qualified professionals suited to inspect and repair your engine.

7. I have installed my KPMI® valve guides and want to know how much ID clearance I should provide?

When installing in an Aluminum or Cast Iron cylinder head, any combination of the following: Black Diamond®, White Diamond® or Tensilite® valves, cast iron or bronze guides, KPMI® recommends the following ID clearances:

    Aluminum cylinder head recommended valve stem-to-guide clearance is as follows:

                       •  Intake: .0008" to .0012"

                       •  Exhaust: .0012" to  .0015"

   Cast Iron cylinder head recommended valve stem-to-guide clearance is as follows:

                       •  Intake: .0010" to .0015"

                       •  Exhaust: .0015" to .0020"

   Note:

                       •  KPMI® does not recommend clearances for Nitrous or blown applications. The recommendations above are offered in 

                          conjunction with the use of a thin film of Paste-Type, Molly-Based assembly lube, applied to the stem of the valve prior to 

                          installation.

8. How do I size the inside diameter of KPMI® cast Iron or Bronze guides?

KPMI® recommends honing the ID of guides prior to installation to a slip fit to the valve stem diameter, using the valve as a gage or a seat and guide machine pilot as your gage. Cast iron guides are easily reamed and KPMI® then recommends honing them to achieve a surface finish of RMS-32 or better. Bronze guides can be difficult to ream unless in well secured and accurately aligned conditions and preferably with the use of coolant. KPMI® recommends rigid type mandrel hones or diamond hones for controlled ideal results, when honing cast iron or bronze guides.

23. Why don't my new valves fit into my new guides?

When guides are installed into a cylinder head, they distort due to interference fit. All KPMI® guides are designed with undersized IDs to allow the builder to true the ID and set the desired valve to guide clearance.

  • Condition: Brand New
  • Modified Item: No
  • Custom Bundle: No
  • Manufacturer Part Number: 60-60060
  • Brand: Kibblewhite
  • Non-Domestic Product: No

PicClick Insights - Kibblewhite Valve Guides Guide Suzuki DRZ400 LTZ400 DRZ LTZ 400 DR LT Z400 PicClick Exclusive

  •  Popularity - 13 watchers, 0.0 new watchers per day, 2,642 days for sale on eBay. Super high amount watching. 92 sold, 1 available.
  •  Best Price -
  •  Seller - 139,883+ items sold. 0.3% negative feedback. Great seller with very good positive feedback and over 50 ratings.

People Also Loved PicClick Exclusive