Add GSS Auto Parts
as your favourite seller
Hover to zoom
ONLINE PRICE ONLY * This price is only valid for online orders. (Not In-Store) Product DescriptionRed OEM Coolant Concentrate is a GENUINE GLYSANTIN® G40® Original Equipment Manufacturer (OEM), Fully Licensed and Warranty Approved , Type "A", Ethylene glycol, Anti-Freeze Anti-Boil CooIant as used in initial manufacturer factory fills. It uses a technically advanced Si-OAT (Organic Acid Technology) based inhibitor system that is Phosphate, Amine, Borate and Nitrite free. The extended long life inhibitor formulation prevents rust, corrosion, cavitation and degradation of the cooling system for 8 years or 500,000km. It is available in both concentrate and premix formulations.
PLEASE NOTE: Red OEM Coolant Concentrate replaces 8 Year 500,000 KM Red Coolant Concentrate and 6 Year Extended Drain Anti Freeze Anti Boil Coolant
Red OEM Coolant Concentrate is suitable for the cooling systems of petrol, LPG, light and heavy duty diesel engines that require full Si-OAT Type A anti-freeze / anti-boil / anti-corrosion properties.
Red OEM Coolant Concentrate is suitable for cars, 4WD's, motorcycles, light & heavy duty commercial vehicles, construction and agricultural equipment. It is especially suited to vehicles of European origin such as Audi, Bentley, Bugatti, Lamborghini, VW, Seat and Skoda (all 2008 on), MAN trucks (Dec 2011 on), Mercedes-Benz trucks (Oct 2011 on) and Porsche (911, Boxster, Cayman, Cayenne, Panamera) 1997 onwards.
Red OEM Coolant Concentrate provides extended long-term protection against rust and corrosion for all materials used in the engine and in the cooling system construction. It protects cast iron, aluminium, copper and solder alloys as well as the hoses, seals and plastics. It is especially effective in all aluminium engines that are under load or used in extreme hot and cold climates. It may be used in all types of vehicles that use red, magenta or orange coloured initial fill coolants and it is also suitable for use in out of warranty service to maintain OEM performance. It is also ideal for motorcycles.
Red OEM Coolant Concentrate should be used at a concentration level of 50% or as per manufacturer recommended dosing rates. We recommend using Penrite De-Mineralised Water when mixing although the phosphate free formulation allows it to be mixed with normal tap water if necessary.
For measuring coolant concentration and condition, we recommend Penrite Coolant Test Strips. Penrite recommend flushing the cooling system prior to a complete service refill. Penrite Radiator Flush effectively cleans the system in 7 minutes and prepares the cooling system for new coolant.
Penrite recommend mixing at the manufacturers recommended concentration levels.
When mixing coolants, Penrite recommend mixing at the manufacturers recommended concentration levels with Penrite De-Mineralised Water
BENEFITS:
8 Year or 500,000 km (whichever comes first) drain intervals if used and maintained at 50%
OEM Approved to maintain manufacturer’s warranty & specifications.
Compatible with all plastics, rubbers and seals.
Protects all internal surfaces from corrosion, including aluminium.
Phosphate free formulation allows use with hard water.
Borate, nitrite and amine free
Audi TL 774-G
Bentley TL 774-G
Bugatti TL 774-G
Cummins CES 14603
Deutsche Bundeswehr TL 6850-0038/6
Deutz DQC CC-14
Deutz Fahr Harvesters (from 04/2017)
Ducati (Approved)
Irizar (from 09/2016)
Lamborghini TL 774-G
Liebherr Minimum LH-01-COL3A
MAN 324 Type Si-OAT
MB-Approval 325.5
MB-Approval 325.6
MB-Approval 326.6
MTU MTL 5048
Porsche (From 2010)
Seat TL 774-G
Setra MB-Approval 325.5
Skoda TL 774-G
Smart MB-Approval 325.6 (from 05/2014)
VW TL 774-G
AS 2108-2004 Type A
ASTM D-3306
Audi TL 774-G
Bentley TL 774-G
BS 6580
Bugatti TL 774-G
Cummins CES 14603
CUNA NC 956-16
Deutz AG 0199-99-1115/2091
Fiat 9.55523
Ford M97-B44-D
G12++
German Army TL6850-0038/1
Glysantin® G40®
GM 1825M
GM 1899M
GM 6277M
GM Holden 6277M
Jaguar M97-B44-D
JASO M325 (Japan)
Jenbacher TA 1000-0201
JI Case JIC 501
JIS K2234 (Japan)
KSM 2142 (Korea)
Lamborghini TL 774-G
MAN 324 Type Si-OAT
MB 325.5.
MB 325.6.
MB 326.3 (Premix Only)
Mitsubishi ES-X64217
Nissan NES M5059
Opel B 040 1065
Renault 41-01-001Q Type D
SAAB GM6277M
SAE J1034
Scania T1.02-98 0813
Skoda TL 774-G
Smart MB 325.6
Toyota Long Life TSK2601G
UNE 26.361.88
Vauxhall B 040 1065
VW TL 774-G
G13
VW G13
Size | 1L |
Returns
As per Australian consumer law, we do accept returns. However, the cost of return postage is the responsibility of the buyer, and a refund will be processed once the item is received in its original packaging and in a re-saleable condition.
Fuel and Electrical items are not returnable. This includes but is not limited to Fuel Pumps, Fuel Pressure Regulators, Ignition Modules, Ignition Coils, Sensors, Switches, Senders.
It is the responsibility of the person fitting the parts (preferably a qualified motor mechanic) to ensure that the parts supplied are correct for the application and the same as the parts being replaced, including size, shape, and any other factors that may affect the fitment of the part. If a part is fitted to the vehicle and the customer later realizes it is the wrong part, we cannot accept it as a return, as it is the responsibility of the part fitter to ensure the part is correct before fitting. This policy is firm and not negotiable.
The original postage cost will not be refunded, and for items with free postage, a handling fee may be charged to cover the original postage cost.
We cannot be held responsible for buyers' mistakes when reading item descriptions and vehicle applications. If a mistake is made by the buyer, it will be their responsibility to return the item as per the above policy.
We are an honest business, and if we make a mistake, we will do everything we can to rectify the issue.
If a claim is made that the item sent is not as described, we reserve the right to request photos as required to determine the issue and how it can be fixed. In most cases, we will ask for a photo of the part we sent and the part off the vehicle.
No returns will be accepted without prior approval. For eBay orders, please submit a return request through your eBay purchase history. For website orders, please send us an email with a request. Any orders returned without authorization will be placed on a miscellaneous shelf.
Order Cancellations
If you need to cancel an order, please note that a cancellation fee may apply. The exact amount of the fee will depend on the payment method used, but it is typically around 6% of the original purchase price, including postage.
Please be aware that requests to cancel local pick-up items, such as aerosol products or other dangerous goods, will not be accepted after the order has been processed on our end.
ShippingSome bulky items may need to be sent by courier.
Some items may be eligible for combined postage. To get combined postage items must be purchased at the same time in the same transaction. Add the item to your shopping cart and checkout all at once. Combined Postage will be calculated off the dearest individual postage. For example, if you buy 1 belt and the postage is $7.50 and you buy a set of Ignition Leads and the postage on that is $10. Combined Postage will be $10.
Pick up can be made available from Mount Druitt, NSW only and only on items with a "Local Pick Up" option in the shipping options.
IMPORTANT: PLEASE CHECK WITH US TO MAKE SURE YOU CAN COLLECT THE ITEM AT THE TIME YOU WANT BEFORE BUYING.
Pick up times are generally between 9:00am and 4:30pm Monday-Friday but this can sometimes vary.
In some cases we may need to transfer stock from our warehouse to the pick up location, if you need it straight away contact us before buying. Otherwise we can generally get items transferred within the same day if ordered before 11:30am.
Note: Some Tools & Bulk Engine Oils (20L) may take approx 3 days to arrive before it can be picked up.
Please allow a MINIMUM of 3-4 hours for your order to be ready.
Note: * some items will take longer than others as it may need to be transferred from another warehouse.
Our Commitment:
All products we sell come with a manufacturer's warranty. The length of this warranty varies based on the product and the brand. If an item fails within the warranty period due to a manufacturing defect, we'll work with you to process a warranty claim.
Important Warranty Conditions:
Warranty Claim Procedure:
Contact Us: Reach out to GSS Auto Parts to initiate the warranty process.
Return the Part: Return the faulty part to us, along with your original GSS Auto Parts invoice. Please include a detailed description of the fault, including any fault codes, mechanic's reports, or diagnostic information that supports your claim. Providing thorough details helps streamline the warranty process with the supplier.
Supplier Assessment: We will send the part to our supplier for warranty assessment. This process can take some time, typically a minimum of 1-2 weeks, depending on the brand.
Outcome:
Additional Notes:
Contact Us: If you have any questions or need to start a warranty claim, please contact us.
Updated: 9th March, 2024
We are a small family owned Auto Parts store located in Western Sydney, Australia. Our business sells a wide range of Automotive Parts to suit all modern vehicles. We can supply almost any part for any vehicle, if you do not see it listed in our eBay store, send us a message with your vehicle details and we will get back to you within 24 hours
Copyright GSS Auto Parts