Huge range of Countersunk Ribbed Chipboard Timber Screws

$13.00 Buy It Now, FREE Shipping, 30-Day Returns, eBay Money Back Guarantee
Seller: Top-Rated Seller fastenersgalore1 ✉️ (80,814) 99.8%, Location: Murarrie, QLD, AU, Ships to: AU, Item: 303377473955 Huge range of Countersunk Ribbed Chipboard Timber Screws.
  • Store
  • |
  • About Us
  • |
  • Terms
  • |
  • Payment
  • |
  • Delivery
  • |
  • Returns
  • |
  • Technical
  • |
  • Contact
ALL CATEGORIES
Technical Specification
Product Chipboard Screw
Head Type Countersunk Self Embedding with Nibbs
Screw Sizes Available Choose from the dropdown above
Thread Type Coarse
Length - Measured overall Choose from the dropdown above
Thread length APPROX Refer to the Dropdown Above
Ribbed under the Head Between 4 - 8 Ribs depending on the Manufacturer
Material Case Hardened Steel
Finish Refer to the dropdown above
Screw Point AB Standard
Drive Type & Size Refer to the dropdown above
Recommended Drill Speed 1000
Brand - Our Discretion Tower / Bremick / Hobson
Quantity Choose from the dropdown above
Product Information
  • Countersunk Chipboard Timber Screw are a coarse thread timber screw, countersunk flat head and ribs under the head that self embed with the timber surface for a flush or countersunk finish. Chipboard screws provide maximum grip and minimum stripout into chipboard, MDF, other composite and soft timbers. It is recommended to drill a pilot hole into some hardwoods and if possible, test on an outcut as performance and outcome vary depending on the type of timber and age. We suggest to choose a screw long enough to provide approx. 20mm of thread embedment into the chipboard or wood being fastened to
  • Material / Coating: Galvanised coated fasteners have been used for roofing, cladding, steel buildings, trailers, bridges, fencing, power poles, outdoor furniture, house framing, fencing and marina’s for over 150 years. Since galvanising was first introduced, we have seen a lot of new terms like Class 3, Class 4, B8, Climaseal 3, Climaseal 4, Climaseal 5, Armour Ceramic Coating, Mechanical Galvanised and Ruspert. They are all variations of the original galvanise. All self drilling and timber T17 screws from Bolt and Nut Australia are guaranteed to comply to a minimum of Class 3 and extend to Class 4 and the ultimate of protection B8. Please refer to our technical pages for more information or contact us for advice on choosing the right fastener
  • Material / Coating: Zinc Yellow plated refers to the colour of the chromate that is applied after zinc has been applied. Yellow chromate increases the overall protection of the finish. The coating is intended to be used internally as it only offers an average level of protection against corrosion. If you want a fastener that will withstand the outdoor elements look for a Stainless steel or Galvanised fastener
  • What does TPI stand for?: TPI stands for “threads per inch” which literally means the number of threads within each inch on a screw, a bolt, or a fastener. To determine the TPI of a screw, count the number of threads contained within an inch of length on the fastener. If the screw is less than an inch count ½” of an inch and multiply by 2
  • How to measure the length of a Timber Screw: Fastener length is generally measured from the point where the surface of the material will be when the fastener is installed to the end of the fastener. Thus, fasteners with heads that sit above the surface are measured from under the head to the end of the fastener, while fasteners that sit flush with the surface are measured from the top of the head to the end of the fastener
  • Thread Length: have been included as a guide only. Due to stock being sourced from multiple suppliers variations do exist. We will always ship the same brand and thread length but subsequent orders may be another brand and the thread length may be different. If thread length is critical, please message us prior to ordering as we are happy to physically check our stock and advise prior to shipping
  • Need a Driver Bit?: A large range of suitable driver bits are available in the "Drilling, Driving and Tools" section of our website
  • Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you see a problem with our specifications please contact us
  • Dimensions: Our stock is sourced from various suppliers, therefore differences may exist between batches such as height, width, visible stamped markings, appearance or actual finish
  • Photos: are of the product but may not be the actual diameter, length, thread length, colour you require, always refer to the size in the description and additional specifications data provided prior to ordering
  • Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
  • Disclaimer: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Bolt and Nut Australia is not responsible for any loss, claim or damages arising therefrom. In developing this information, Bolt and Nut Australia has made a determined effort to present it accurately
  • Buy with confidence: ⇒ 10+ years experience selling online, > 19,000 stock lines, > 60 million pieces ex stock in Brisbane QLD
  • Prices: include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
Suppliers
BOLTS - METRIC BOLTS - IMPERIAL SOCKET SCREWS - METRIC SOCKET SCREWS - IMPERIAL MACHINE SCREWS - METRIC MACHINE SCREWS - IMPERIAL NUTS - METRIC NUTS - IMPERIAL WASHERS - METRIC WASHERS - IMPERIAL HARDWARE TOOLS NUTSERTS - FLANGE NUTSERTS - COUNTERSUNK NUTSERTS - RUBBER / WELL NUTS FASTENER KITS METAL SCREWS - BUTTON METAL SCREWS - COUNTERSUNK METAL SCREWS - DECKING METAL SCREWS - FLAT METAL SCREWS - HEX METAL SCREWS - WAFER TIMBER SCREWS - BUGLE BATTEN TIMBER SCREWS - BUTTON TIMBER SCREWS - CHIPBOARD TIMBER SCREWS - COUNTERSUNK TIMBER SCREWS - DECKING TIMBER SCREWS - HEX TIMBER SCREWS - PARTICLEBOARD TIMBER SCREWS - PLASTERBOARD TIMBER SCREWS - WAFER SELF TAPPERS - BUTTON SECURITY SELF TAPPERS - CSK PHILLIPS SELF TAPPERS - CSK SECURITY SELF TAPPERS - MUSHROOM PHILLIPS SELF TAPPERS - PAN PHILLIPS MASONRY - DROP IN ANCHORS MASONRY - HOLLOW WALL ANCHORS MASONRY - NAIL IN / PIN ANCHORS MASONRY - SCREWS BOLTS MASONRY - SLEEVE ANCHORS MASONRY - SPRING TOGGLES MASONRY - WALL MATES MASONRY - WALL PLUGS MASONRY - WEDGE ANCHORS POP RIVETS - DOME POP RIVETS - COUNTERSUNK POP RIVETS - LARGE FLANGE ALL THREAD PINS & CLIPS DRILLING DRIVER BITS
ebay listing template design by
  • Condition: Brand New
  • Screw Diameter & Length: 8g x 20mm (Full Thread)
  • Drive Type & Finish: Phillips PH2 - Zinc Yellow
  • Pack Quantity: 100
  • Material: Choose from the dropdown above
  • Product: Countersunk Chipboard Screw
  • Australian Stock: YES, supplied & despatched ex Brisbane
  • Tax Invoice Supplied: YES
  • MPN: T9PDYRP0809020
  • Screw Sizes Available: Choose from the dropdown above
  • Thread Length: Choose from the dropdown above
  • Thread Type: Coarse
  • Drive Type & Size: Choose from the dropdown above
  • Screw Point: AB Standard
  • Freight Free: FREE delivery anywhere in AUSTRALIA
  • Brand: Tower / Bremick / Hobson

PicClick Insights - Huge range of Countersunk Ribbed Chipboard Timber Screws PicClick Exclusive

  •  Popularity - 101 watchers, 0.1 new watchers per day, 1,586 days for sale on eBay. Super high amount watching. 2 sold, 10 available.
  •  Best Price -
  •  Seller - 80,814+ items sold. 0.2% negative feedback. Top-Rated Plus! Top-Rated Seller, 30-day return policy, ships in 1 business day with tracking.

People Also Loved PicClick Exclusive