Newest Design High Power 1:1 Balun for 160m - 10m Bands (<1.8 to >30 MHz)
This balun is engineered and optimised for the HF bands including; 160, 80, 75, 60, 40, 30, 20, 17, 15, 12 & 10 Metre HAM bands
Part Number: C-TX-BALUN-HF-1:1
Utilizing the Reisert design, for a 2KW Continuous Power Choke Balun, it will remove all stray current on the coax feed line and balance up the feedpoint of :-
The radiation pattern of a typical Horizontal Dipole antenna will become more symmetrical and any Radiation previously coming from the feedline will be virtually eliminated !
Prevents Transmitter interference from a radiating feedline and stops RF coming back into your shack !
Using the highest quality components available, including silver plated teflon hardline coax and stainless steel binding posts, supplied with S/S washers and nuts.
High Power operation is assured, with the ability to handle the full US Legal Limit plus more... ( at least 2KW into a resonant antenna )
Efficiency is greater than 99.99%, which is far better than our competitors, try the tests yourself, put your old balun on notice !
Wideband operation makes it ideal for Longwave / Mediumwave Reception, with the useful frequency range extending to well below 500KHz, again try that with a conventional HF 2-30MHz 1:1 Balun and you'll wonder where all the signals went !
Can be used by Shortwave Broadcasters, ideal for that standby LP transmitter !
Manufactured with a long life UV resistant IP66 case and gasketed lid and an SO-239 Socket with Gold plated centre pin.
Also available with Type-N Socket, please specify which type you would like !
Designed for maximum strength as a Dipole Centre Point and has a Stainless Steel top support eyelet for connection to a halliard.
Proudly Australian Designed and Built !