15. can not support Fax Modem (Fax /Data) or not support internet access
Product Introduction
Congratulations on purchasing of our Fixed Wireless Terminal.
Before using this terminal, please kindly read this user guide carefully.
This is our new design, which uses GSM/3G WCDMA networks to operate.
You can dial the local calls, domestic and international calls with this Terminal
connecting with a common wired desktop phone and a standard SIM card.
It is widely used in these areas:
Remote country, mountains,
Dwelling house with weak signals,
Public telephone shops, offices, telemarketing,
Removable places such as ships, trains, and long distance buses.
Our wireless terminal also has these characteristics as below:
Easy to install, easy to operation, powerful capacity of signals receiving,
Clear talking setting, long using life, steady performance.
Key Technical Specifications
Following are the key technical specifications of this terminal:
1.Networks support:
2G Networks GSM900/1800MHz 2G Networks GSM850/900/1800/1900MHz 3G WCDMA(HSPA/UMTS 900/2100MHz)
4G Band support bellow:
4G LTE FDD: B1/B2②/B3/B4/B5/B7/B8/B28 ( ①: Rx-diversity not supported.)
4G LTE TDD: B40 3G UMTS WCDMA: B1/B2/B5/ B8 2G GSM: B2/B3/B5/B8
Note: Differ Country Operators will differ frequency,so please check clear about your country frequency band.
3. Voltage: DC 5V /DC12V
4. Stand by hours: 48 Hours
5. Talk time: 2-6 Hours
6. Charging time: 6 hours
7. Power consumption: Static≤25MA ;Emission≤500MA
8. Peak power consumption: 0.25W/0.5W
9. Receive sensitivity: -104db
10. Antenna increment: All directions: 5.0db ; Certain/Selection: 12db
Key functions
The key functions of the terminal are list as below:
1 .Multi-function LED/ LCD lights display signal, running state.
2.Can dial the local calls, mobile calls, international calls and special free calls.
3.Built-in watchdog duty circuit, machine any fault will restart.
4.Provide standard communication voltage, support DTMF system
5.Caller ID display time and date, the power supply of battery can
display at the same time on the LCD.
6.Automatic card-locking and net-locking enable
7. If 4G is not available ,it will drop down to 3G
Connect the terminal
Installing the Antenna
To choose a proper place for the antenna is the first and very important step
for antenna installing. You can use your mobile phone to search for the place
where the strongest signal is. Then put the antenna here.
Please do not make the antenna too close to the terminal. It will disturb the signal
of the Please do not make the antenna and the terminal too close to the TV set,
computer, and radiogram. It will disturb the signal of the terminal.
Inserting a SIM Card
Make sure the terminal is switched off and the AC adapter is unplugged: insert the
SIM card only when the terminal is switched off and the AC adapter is unplugged.
According to the chart instructions
Connecting your terminal with desktop phone
If you want to use the terminal to make calls, you should connect the terminal with a
Common wired desktop phone.
There is one or two communication ports at the back of the terminal .You can connect one desktop phone and billing machine (optional) with our terminal.
It's very easy to connect the phone and terminal, just need a common communication cable .
Call
Make or receive a call is Similar to your fixed line
When your phone is ringing just lift up the handset of the telephone set and speak.
Dial your number, after a timeout (end of dialing timeout default value:6sec)the
call Will be launched. To speed up you can press# at the end of the number.
Package list: 1 x Fixed Wireless Terminal Main Unit 1 x Power Supply (AC 100-240V 50/60HZ DC12V 1A), Free Power Adapter if need, Compatible with your country 1 x special antenna 1 x telephone line 1 x user manual (English)