Industrial Quality Schrader Valve Bulkhead to 1/8th BSPT female Thread
The Bulk Head Schrader can be mounted by simply drilling a hole, comes with a retaining nut and features a 1/8 bsp female on the other end
The valve core is made from Stainless Steel and has rubber seals.
Suitable for car and motorbike suspension systems, Shock absorbers, Airbags Suspension filler, air tanks, water pressure tanks, air lines on bores and other uses you may have.
Max Working Pressure of 350 PSI , 2.5 Mpa
Pack of | Price |
---|---|
2 | $ 28.00 |
5 | $ 40.00 |
10 | $ 58.00 |
Please check you are ordering the Correct Thread BSP is the Most Common why NPT is Prdomantly used on US Equipment.
NPT will often have small niches on the hex nut corners.
Function
Push tube in to connect push retaining ring to release.
Pre Teflon coated on all-male threaded versions.
Nickel-Plated on all metal surfaces.
Stainless Steel Retaining Teeth Ring.
Range of Application
Compressed Air or Water only (Not other Gasses or Liquids)
Working Pressure: 0~150 PSI / 0~990 kPa
Negative Pressure: -29.5 inch Hg/ -750mm Hg /-750 Torr
Working Temperature: 32~160F / 0~70C
Application: Connect Polyurethane and Nylon Tube
Note:
Remove Dust and Impurities from Hose Before Insertion.
Do not Over Tighten Threaded Parts.
This thread type is most commonly used in North America. You’ll recognize it by its tapered outer and inner diameter which is self-sealing. When torqued the flanks of the threads compress against each other forming a leak-tight seal. However, it is still recommended to use PTFE tape or another sealant compound to guarantee a completely leak-tight seal.
Dash Size
(Nominal Size) | Thread Pitch | Male Thread O.D. mm | Male Thread O.D. inches | Female Thread I.D. mm | Female Thread I.D. inches |
-02 (1/8) | 27 | 10.3 | 0.41 | 9.4 | 0.37 |
-04 (1/4) | 18 | 13.7 | 0.54 | 12.4 | 0.49 |
-06 (3/8) | 18 | 17.3 | 0.68 | 15.7 | 0.62 |
-08 (1/2) | 14 | 21.3 | 0.84 | 19.3 | 0.76 |
-10 (5/8) | 14 | 22.9 | 0.90 | 21.1 | 0.83 |
-12 (3/4) | 14 | 26.9 | 1.06 | 24.9 | 0.98 |
-16 (1) | 11½ | 33.3 | 1.31 | 31.5 | 1.24 |
-20 (1 ¼) | 11½ | 42.2 | 1.66 | 40.1 | 1.58 |
-24 (1 ½) | 11½ | 48.3 | 1.90 | 46.2 | 1.82 |
-32 (2) | 11½ | 60.4 | 2.38 | 57.9 | 2.29 |
*O.D. = Outside Diameter I.D. = Inside Diameter
This is the standard thread type that has been adopted internationally for interconnecting and sealing pipe ends. You’ll find it used all throughout Europe. There are two types of BSP threads, BSPP and BSPT. BSPP refers to parallel or straight threads. Meanwhile, BSPT refers to tapered threads.
Dash Size
(Nominal Size) | Thread Pitch | Male Thread O.D. mm | Male Thread O.D. inches | Female Thread I.D. mm | Female Thread I.D. inches |
-02 (1/8) | 28 | 9.7 | 0.38 | 8.9 | 0.35 |
-04 (1/4) | 19 | 13.2 | 0.52 | 11.9 | 0.47 |
-06 (3/8) | 19 | 16.5 | 0.65 | 15.2 | 0.60 |
-08 (1/2) | 14 | 20.8 | 0.82 | 19.1 | 0.75 |
-10 (5/8) | 14 | 22.4 | 0.88 | 20.3 | 0.80 |
-12 (3/4) | 14 | 26.4 | 1.04 | 24.6 | 0.97 |
-16 (1) | 11 | 33.0 | 1.30 | 31.0 | 1.22 |
-20 (1 ¼) | 11 | 41.9 | 1.65 | 39.6 | 1.56 |
-24 (1 ½) | 11 | 47.8 | 1.88 | 45.5 | 1.79 |
-32 (2) | 11 | 59.7 | 2.35 | 57.4 | 2.26 |
*O.D. = Outside Diameter I.D. = Inside Diameter
All out items are in stock and ready to ship from our Queensland Wharehouse. we endeavour to ship all items on the next business day.
If your item is taking a long time please let us know so we can chase up the Postage provider.