The item listed is for a 40 - 125 Hp black, grey or white
Fast Tail is the best performing Hydrofoil on the market guaranteed or we will refund your money
The performance gain Fast Tail gives your outboard boat is incredible!! Guaranteed or we will refund your money
PRICES
10-30hp : $114.95
40-125hp : $174.95
130-300hp : $194.95
V8 200mm Cav Plate : $204.95
Note: This 40-125hp Fast Tail does not fit Mercury command Thrust or big foot gearboxes . Command Thrust and Bigfoot gearboxes require 130-300hp size Fast Tail
CUSTOMER FEEDBACK
Michael Cox
Hi, Very Impressed with my Fast Tail. Plane speed is 15mph now and gained 6mph. Better than any prop I’ve tried, thanx again.
Michael Reymolds
Awesome piece... Was going to sell the boat because it didnt perform well in the chop but now its completely different boat.
Thanks for getting it to me so quick. I got it Friday lunch andwas out on the water that arvo.
Bronson Bardon
Went for a run in the boat today, was a massive difference and can now sit on the plane at about 15kmh with the fast tail and the trim tabs, handles well and I didn't loose any speed. Would recommend for sure
Wayne Lenartowicz I put one on mine and it's made so much of a difference in handleing and got a bit more speed out or her. Very very happy with the results.
Kyle Mazzer Ive got the 50 yammy on 420 renegade mate. Seams more stable in a bit of chop aswel. For $160 defenetly worth it man.
Dear fast_company_47,
hi i tried fast tail on the weekend 15hp 3.7 stessl edgtracker could not believe the difference no porpoising and goes faster worth its wait in gold great invention thanks
- skipatpub
Danny Miller
Fitted up the fast tail on my 440 Renedade, 60hp Mercury CT engine and took it out for a run. I'm very impressed with the take off, handling and slower planing. Well worth the money and one of the best things I've done to my boat so far, keep up the great work, cheers.
Damo Rahe
I have had one of these on my 40hp etec on a 4.35m dinghy. Absolutely great product. Best money spent. Does what it says and worth the money compared to other similar products. Keep up the good work fasttail.
Travis Fortesque
Awesome product mate. I have a 2006 Stabicraft 609 Frontier with a 115hp Yamaha,
Did wonders for rough water handling. Everything as stated in your advertising the product has delivered. Haven’t had a calm day to check top speed performance but still thoroughly happy with the Product.
Josh Barra
Best investment have them on my twin 115hp only fins I'll buy a1 👌
Luke gave the fast tail a go sat & sun just gone. Mate I have a totally different boat, rough water handling was brilliant pick up and go was awesome. Will be able to sell some for you, mates thought it was brilliant. Could you send me some brochures please? Regards Graeme.
Graeme Moore
Hi Luke ,
Fitted fast tail to 90 hp Evinrude on cruise craft 5mtr. Customer was complaining of porpoising even with engine fully trimmed down. After fitting and boat testing customer rang back to thank us for fitting as now porpoising has been completely eliminated and engine runs at 50 percent trim angle. He has also gained 5mph at top speed as you can imagine one very happy customer. Thanks for a great product .
Regards, Adrian
Whyalla Foreshore Marine
Hi Luke
I didn't do a lot of boating but I had an increase in speed from 74km to 75km an increase in fuel economy at cruising speed from 2.2km per L to 2.3km per L . I noticed that the best cruising RPM range was broader from 3000 RPM to 4000 RPM maintaining the 2.3km per L all the way in this rang. I was very impressed with the Fast Tail Hydrofoil and best of all there was no drop in RPM at any stage.
Cheers
Gavin
Hi Luke ,
Thanks very much for the fast delivery. The fitting to my 25 hp Johnson was relatively simple and when I tested it, my boat is a 3.66 m Haines Hunter tinnie, the performance enhancements were just as promised. Much lower planing speeds and massive improvements in performance through the speed range.
Your product is on average $50 cheaper than the more expensive hydrofoils for my size motor and is made from much stronger material combined with a superior method of fitting.
I would not hesitate to recommend the Fast Tail to anyone.
Thanks again for your excellent product and service.
Regards,
Ian.
Dear fast_company_47,
Hi mate had a chance to finally take the boat out. The hydrofoil made all the difference to the boat. When I use to take off in the boat with no weight up the front it was on the verge of flipping but with the hydrofoil foil i can give it full throttle with the nose staying down and on the plane in a matter of meters. Thank you for all your help along the way. Cheers
- omw351
hi Luke.
I have an overpowered 15 ft dancraft with a 150 merc race motor.
it was fitted with a se300 plate,which sort of did the job,but was scarey at high speeds
especially when re entering off a wave the steering had a mind of its own.
I have fitted your fast tail and what a difference,planes faster,steering lighter,easier to find trim sweet spot,
It sits level with just the driver,never did before.just LOVE it.
John fitzgerald!!
Just wanted to let you know that I have now fitted and trialed your Fast Tail on our 17 foot Tournament boat. This unit is very well made and once fitted out performed what i had expected from such a unit. It has greatly improved boat control in rough seas and the performance of the boat now REALLY puts a smile on my face as I have gained a further 200rpm on top end taking my boat water speed to 45MPH, our boat will now easily plane at a lazy 2500rpm for great fuel saving economy. I actually catch much bigger boats with large outboards and overtake them with confidence as the boat is much more stable crossing wake at speed. I will highly recommend this item to anyone who is interested in purchasing and fitting one.
thank you
Patrick
- texasflysuperstar
Hey Luke took the fast tail for a run last night - wind was up a little so there was some pretty choppy water and it seemed to take all the bounce out of it really well - made for a lot smoother ride and was always on top of the water rather than cutting through it - didn't let go at full speed because I had my young fella with me but seemed to have power to spare and the handling was heaps better - a really good investment - thanks Cheers Grant Healey
14/2/11
Dear fast_company_47,
hydrofoil works great had others on other outboard motors but very impressed with your design well done and thanks again pat aubrey moore park beach.
- pat9472
Hi Luke,
I would like to thank you for your fast service and I would like to say how pleased I am with the result.I have used other foils before but have never experienced such positive results for so little money.
The boat is a Haines Signature 485sf with a 90 Etec running a 18” Raker Prop with the propshaft 80mm below the bottom of the boat.
The boat used to lift its nose on take off (due to running the engine so high) now it is dead Flat and is on the plane in less than halve the time.
I can now plane at 2300rpm at 10mph without the fast tail it dropped of the plane at 3000rpm.
I have also gained 100rpm at full throttle.
Thanks again
Wayne Drabsch
Cannonvalley Qld
I purchased a 2nd hand Haines Signature 530C which had a SE300 foil on the back. I have always been a fan of foils but only for the right application. I see the comments in many boating forums that “If hydrofoils were so good, the outboard manufacturers would fit them as standard”. Well how the hell do the outboard manufacturers know what boat the motor is going on and what gear you are going to put in your boat.
2 weeks ago I removed the foil to see if it was put on for no real reason.
The 530C was an absolute dog to plane and would bow bounce being a fairly heavy arse rig. Having damaged the SE300 whilst removing (due to the previous owner stripping one of the bolts) I decided to purchase another.
Luckily I came across the fast Tail and after reading feedback on your site I thought I’d give it ago.
Well what an improvement from the SE300. I do have to say the SE300 did do a great job but I had experienced the dreaded following sea broach issue with it.
I ran with a reasonable following sea today and what a pleasure to drive. Brilliant to get on the plane and has increased my speed by 8 km/h.
I think what really sold me on your product, is the fact it isn’t a so much a hydrofoil but a cavitation plate extender.
Anyway thanks for a great product.
Cheers
Craig
Hi,
I put a Fast Tail on my mates boat which we go to the reef in, made a huge difference to it. We wont be stocking any other brands from now on.
Neale Murphy
Owner/Manager
WHITSUNDAY YAMAHA MARINE
The foils really change de handling of the boat. I am so happy. They are simply great my friend. Will send you pictures today. Thanks again for the good job done. Vatea
Dear fast_company_47,
Hi mate,
Your fast tail works awesome...... I own a 465 open tinny with a 70hp tohatsu tiller steer on the back. Previously the boat would bog in and be stern heavy trying to get on the plane, also fall off the plane easily at low planning speeds at any trim setting. After fitting the fast tail myself quiet easily, i immediately noticed changes in boat as it now sits almost flat when accelerating onto the plane, holds planning speed much lower and gets out of the hole and on the plane much easier. Also i was able to lift the motor by 50mm which gained more revs and slight speed. I will definitely be putting a fast tail on my next boat when i upgrade. Great product which works excellent.......
Mark Cummings
(GoldCoast)
Dear fast_company_47,
Hi Luke,
Gave the "Fast Tail" a workout over the long weekend, and it does make the boat suitably nicer to control, at low speed with less throttle required to propel forward, and smooth high speed turns, even did a bit of slalom just for the feel, at high speed, and it felt very comfortable and smooth. Hole shot take offs were good as it propelled forward, and not like a dolphin to the plane. All in all, glad I did do the fit out. Made a few people take notice with their bigger boats !!
Boat details: Savage 3.7mtr aluminum tinny with 28hp Suzuki DT28 2-stroke.
Once again, Thanks Luke.
Rick Block
Adelaide.
Hi Luke,
I fitted the "Fast Tail" yesterday and took it for a spin at Lake Cairn Curran today. I was astounded by the immediate and significant difference in planning ability, even at very low speed. Now my 13ft fibreglass "tinny" with an 8hp Mercury sits very well in the water even with me and all the weight at the back. I'll be delighted to recommend your innovative hydrofoil to all.
Best wishes,
Tony Knight.
- pop4win
Guarantee to fit your outboard or money back.
ü Increases fuel efficiency
ü Faster take off
ü Reduces propeller cavitation
ü Slower planing speed
ü Reduces nose hop
ü Improves rough water handling
Fast Tail Advantages
Ø Fast Tail attaches under the cavitation plate rather than on top. This spreads the load evenly throughout the plate rather than on the individual bolts. This method is highly recommended by performance boat experts.
Ø Thinner stream line shape provides less drag and steering load
Ø Fast Tail reduces propeller cavitation, allowing the engine to be raised which considerably reduces drag and increases performance and handling.
Ø Fast Tail has been designed to allow the trim tab to remain on the engine.
Ø Fast Tail has a larger surface area and is constructed of stiff marine grade aluminium which guarantees performance and life expectancy over plastic models.
Conditions of Sale
Returns
Delivery
Legal