CR2016C1 3V 72Mah Lithium Battery Gp

Product Details 3V LITHIUM BUTTON CELL / COIN BATTERY - GP

Coin-shaped cells are thin compared to their diameter. The metal can is the positive terminal, and the cap is thenegative terminal.

FEATURES:

• Lithium Batteries are primary batteries with outstanding high-energy density
• Voltage during discharge is about twice that of ordinary batteries.
• The energy density is the highest among conventional primary batteries - 5 to 10 times higher than that of carbon zinc batteries.
• These lithium batteries are able to operate at very low temperatures of around -20°C.
• Extremely small voltage decrease and very stable voltage during operation.
• CR denotes manganese dioxide lithium chemistry. Since LiMnO2 cells produce 3 volts there are no widely availablealternate chemistries for a CR coin battery. Conversely, one LiMnO2 cell can replace two alkaline or silver-oxide cells.
• All these lithium cells are rated nominally 3 volts (on-load), with open circuit voltage about 3.6 volts. The IEC "CR" prefix indicates a round, lithium/manganese dioxide cell. Some sizes are also designated with a "BR" prefix, indicating a round lithium/carbon monofluoride cell.

Common Applications:

• Electric wristwatches, both digital and analog.
• Calculators
• Hearing aids
• Some remote controls, especially for keyless entry
• Backup power for personal computer real time clocks and BIOS configuration data.
• Small PDA devices
• Various electronic toys (like tamagotchi, Pokémon Pikachu or a Pokéwalker and other various Virtual Pet devices.)
• Laser pointers
• Small LED flashlights
• Battery-operated children's books
• Glucometers
• Security tokens
• Cyclocomputers
• Red dot sights and electronic spotting scopes
• Manual cameras with light meters, such as the Pentax K1000
• LED throwies
• Various video game cartridges or memory cards where battery-powered RAM is used to store data.
• PCMCIA static RAM memory cards

SPECIFICATIONS:

IEC 60086 designation ANSI C18 /NEDA designation Typical Capacity mAh Dimensions (mm) Diameter x Height Comments Weight: 0.003

CR927		30	9.5 × 2.7	This obscure type of lithium coin cell is used extensively in blinkies.
CR1025	5033LC	30	10 × 2.5	Standard Discharge Current: 0.1 mA
CR1216	5034LC	25	12.5 × 1.6	Standard Discharge Current: 0.1 mA
CR1220	5012LC	35–40	12.5 × 2.0	Standard Discharge Current: 0.1 mA, 0.03 mA (BR)
CR1225	5020LC	50	12.5 × 2.5	Standard Discharge Current: 0.2 mA. Maximum discharge current: 1 mA. Maximum pulse discharge current: 5 mA. {Energizer says this type is obsolete.
CR1616		50–55	16 × 1.6	Standard Discharge Current: 0.1 mA
CR1620	5009LC	75–78	16 × 2.0	Standard Discharge Current: 0.1 mA
CR1632		140  120 (BR)	16 × 3.2	Standard Discharge Current: 0.1 mA, 0.03 mA (BR)
CR2012		55	20 × 1.2	Standard Discharge Current: 0.1 mA
CR2016	5000LC	90	20 × 1.6	Standard Discharge Current: 0.1 mA, 0.03 mA (BR). Often used in pairs instead of CR2032 for devices that require more than 3 V, like blue/white LED flashlights.
CR2025	5003LC	160–165	20 × 2.5	Standard Discharge Current: 0.2 mA.
CR2032	5004LC	220–225	20 × 3.2	Standard Discharge Current: 0.2 mA, 0.03 mA (BR). Maximum discharge current: 3 mA. Maximum pulse discharge current: 15 mA. Common battery in computers to keep the date and CMOS settings current when power is off.
CR2330		265  255 (BR)	23 × 3.0	Standard Discharge Current: 0.2 mA, 0.03 mA (BR)
CR2354		560	23 × 5.4	Standard Discharge Current: 0.2 mA
CR2430	5011LC		24.5 × 3.0
CR2450	5029LC	610–620	24.5 × 5.0	Portable devices requiring high current (30 mA) and long shelf life (up to 10 years)
CR2477		1000	24.5 x 7.7	Standard Discharge Current: 0.2 mA
CR3032		500–560 500 (BR)	30.0 × 3.2	Standard Discharge Current: 0.2 mA, 0.03 mA (BR)

  Returns Delivery About Us Warranty

DOA or Faulty Goods

For all items that are DOA (Dead-on-Arrival) or where the item has developed a fault within the warranty period, Radio Parts will cover the freight charge for the goods to be shipped to us and back to you. In such instances you will need an RA number, after which you will be provided with instructions to have the goods sent back to us. We will not reimburse freight if you decide to send goods back via your own method.

Change of Mind/Incorrectly Ordered

If you have changed your mind or have incorrectly ordered an item, then the return freight is your responsibility. Depending on the state of the goods (unopened, unscathed) we may need to charge you a 20% restocking fee. This will be assessed on a case by case basis.

Return Authorisation

Before you can return an item back to us, we will need to provide you with an RA number. You can initiate this process directly within eBay or straight from our website using the RA form.

Aussie Stock

All our stock is kept in our Melbourne based warehouse. Our stock levels are also updated every 10 minutes! So if it says 10 units in stock, you can trust that it is accurate.

PO Boxes or Parcel Lockers

In most cases we can ship your order to a PO Box or Parcel Locker address. In the event that your item can not be sent to this type of address we may ask for an alternative road-side address, or cancel and refund your order immediately and urge you to replace your order with an alternative delivery address. Items that cannot be shipped to PO Boxes or Parcel Lockers are things like bulky amplifiers and speakers, products classed as dangerous goods & anything that Australia Post deems to be oversized (parcels over 105cm and/or 22kgs).

Delivery times

We typically dispatch our goods same day or next day. From there, you can expect 2 - 8 business days Australia wide. Most capital cities can expect 1-2 day delivery times*.

Any RTS (Return to Sender) orders due to missing or incorrect address information entered by the buyer or uncollected parcels may incur an additional charge for redelivery, or lose any freight charges that were paid if the order is refunded. Please note that we ship all orders using a Startrack Express or Australia Post service that will require a signature on delivery. If you do not require a signature for your order or the item can be left safely, please add a note to the order advising of “Authority to leave”.

*Please note: Delivery time frames are estimations only and calculated from the date the parcel is sent. These time frames do not account for carrier delays which are outside our control. In most cases if your parcel is delayed it will be delivered within 5 days of the original ETA. If the delay extends past this time frame we will do our best to liaise with the carrier and yourself for the best possible solution.

Since 1935

Radio Parts is one of Melbourne’s largest and most established wholesale distributors of electronics and components. We were established in 1935, based in West Melbourne (close to Melbourne's CBD) and offer free on-site parking.

Radio Parts has distributorship arrangements with most of the top brands including Wintal, Doss, Pro2, McLelland, Uni-T, Yamaha, AiPhone, Ness, Blustream and many other brands.

Our 50 staff boast an average of over 10 years' experience and receive continual training, so they remain the most knowledgeable in the industry.

Radio Parts products are supplied to some 9,000 accounts with 6 on-the-road sales representatives. Our sales staff and products are always close at hand.

We invite everyone to visit and share our passion for quality electronics and components.

All our stock are 100% genuine, local Australian stock located in our Melbourne warehouse and come with full Australian warranty. We do not list any grey imports or refurbished products.

• Condition: Brand New
• Brand: GP
• Type: Not Available
• Voltage: Not Available
• MPN: CR2016C1
• Amp Hours: Not Available
• Barcode: 4891199003707
• Stock_code: 02736332
• Model: CR2016C1
• UPC: 04891199003707

See More