The latest upgraded salable 5 axis breakout board is specially designed for the CNC single axis stepper driver controller, such as TB6600HG, M542, M542H, MA560, MA860H, 2M542, 2M982 etc single axis stepper driver controller. With this 5 axis breakout board, any 1-5 single axis stepper driver controllers can be directly controlled by the PC via the MACH3, EMC2, KCAM4, etc.
The TB1H is a high performance microstepping driver based on the latest original TOSHIBA high-efficiency TB6600HG IC. The TB6600HG adopts single-chip PWM bipolar sinusoidal chopper to ensure the low vibration and high efficiency. Moreover, the brand new design with BiCD0.13 (45V) process technology on the chipset also ensures maximum 5.0A output current and 45V output withstand voltage. Consequently, as long as the current range of the stepper motor is within 0.2-5 amps, all the 2 Phase or 4 Phase of Nema17, Nema23, Nema24 and Small-sized Nema34 stepper motors will work perfectly with this new-type TB6600HG Stepper Driver.
In short, with this CNC Kit, you will get more benefits from the Kit on CNC work. Please purchase this kit with confidence.
Please note: This board use parallel port to communicate with computer, the usb is used for providing power for the board.
Features I. 5 Axis Breakout BoardHigh performance, cost-effective.
Maximum support 5-axis stepper motor driver controller.
Two types of ways to get power, 5V DC power supply or USB port to directly get power from PC.
Two-stage signal processing, smooth signal transmission, powerful anti-jamming.
5-input interface to define the Limit, Emergence-Stop, Midpoint-Alignment, Cutter-Alignment, etc..
Relay output control interface, accessed by the spindle motor or the air pump, water pump, etc..
5-axis work LED display, visually display the working condition of the stepper driver controller.
Parallel port communication
II. TB6600HG Stepper Driver Board Controller
High performance, cost-effective.
Automatic idle-current reduction.
Supply voltage up to 45V DC.
Output current up to 5.0A.
Suitable for 2-phase and 4-phase motors.
High speed optoelectronic isolation signal input.
Single-chip PWM bipolar sinusoidal chopper ensures low vibration and high efficiency.
1, 2, 4 (New Mode), 8, 16 adjustable microstep control, motors run more precisely and smoothly.
Equipped with the 3rd generation of breakout board, display panel and control pad to control the motor manually.
Cooling Aluminium Box Design for Cooling, and protect the driver board from being damaged by dirt, dust or other liquids.
Overload, overcurrent, overheat, overvoltage and undervoltage protection to avoid damaging your computer and devices.
ApplicationSuitable for any small-and-medium automatic equipment with CNC controller, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines, and pick-place devices
Suitable for a wide range of stepping motors, from NEMA size 17 to 34 (small-sized)
For advising, such as brand, architechture mould, badge, nameplate, display boards, doorplate, furniture decoration, etc.
For processing various pattern mould
Power Supply Selection12~24V DC power supply for Nema 17 stepper motors
24~36V DC power supply for Nema 23/24 stepper motors
36~45V DC power supply for Nema 34 stepper motors
Output current of the power supply must exceed the sum of motor rated current.
Please SHUT DOWN the power before you plug or unplug the connectors to avoid burning up the board.
TB6600HG DIP-Switch Settings I. DIP-Switch Instructions II. DIP-Switch Settings DiagramOutput Current | SW1 | SW2 | SW3 |
0.2A | ON | ON | ON |
0.6A | OFF | ON | ON |
1.2A | ON | OFF | ON |
1.8A | OFF | OFF | ON |
2.5A | ON | ON | OFF |
3.3A | OFF | ON | OFF |
4.2A | ON | OFF | OFF |
5.0A | OFF | OFF | OFF |
Microstep | SW4 | SW5 | SW6 |
N/A | ON | ON | ON |
1(Full Step) | OFF | ON | ON |
2 | ON | OFF | ON |
2 | OFF | OFF | ON |
4 | ON | ON | OFF |
8 | OFF | ON | OFF |
16 | ON | OFF | OFF |
N/A | OFF | OFF | OFF |
Electrical Specifications of Breakout board | |||||||||
Input Voltage | 5V DC via power adapter or directly get power from PC via USB port | ||||||||
Drive type | Pulse + Direction + Enable Signal Control | ||||||||
Suitable Microstep Driver | 2 Phase, 3 Phase, 4 Phase Microstep Driver (M542/M542H/MA860H/3MA2290 etc.) | ||||||||
Net weight | Approx 80g | ||||||||
Dimensions | 90 * 82 * 15mm (L*W*H) | ||||||||
Electrical Specifications Of TB6600HG Stepper Driver | |||||||||
Input Voltage | 12V ~ 45V(Peak) DC | ||||||||
Output Current | 0.2A ~ 5.0A (Peak) | ||||||||
Drive Type | Pulse + Direction + Enable Signal Control (Single-Chip PWM Bipolar Sine Chopper) | ||||||||
Suitable Motor | Nema17, Nema23, Nema24, Small-sized Nema34 (Rated current: 0.2A-5.0A) | ||||||||
Net Weight | 250g | ||||||||
Dimensions | 105*85*35mm | ||||||||
Operationg Environment & Other Specifications Of TB6600HG Stepper Driver | |||||||||
Cooling | Natural Cooling or Fan Forced cooling | ||||||||
Operating Environment |
| ||||||||
Storage Temperature | -20 °C ~ 65°C (-4°F ~ 149°F) | ||||||||
Total Weight | Approx. 300g |
4 x 1 Axis TB6600HG Microstep Driver Board (TB1H)
1 x 5 Axis Breakout Board
1 x DB25 LPT Parallel Cable
1 x USB Power Cable
1 x CD Driver
Estimated Delivery Time | ||
Australia (NSW) | Australia Post | 2-3 business days |
Australia (VIC,SA,QLD,NT) | Australia Post | 4-6 business days |
Australia (WA,TAS) | Australia Post | 6-8 business days |
New Zealand | Australia Post | 6-9 business days |
Other Countries (May depart from other stock location) | International Airmail Service | 12-21 business days |