4 Axis 500KHz Offline System DDCS V4.1 PLC CNC Machine Controller+ Handwheel MPG

$590.13 Buy It Now, FREE Shipping, eBay Money Back Guarantee
Seller: powace1515 ✉️ (3,153) 99.6%, Location: Changzhou, CN, Ships to: AMERICAS, EUROPE, ASIA, AU, Item: 115512633501 4 Axis 500KHz Offline System DDCS V4.1 PLC CNC Machine Controller+ Handwheel MPG.

4 Axis 500KHz Offline System DDCS V4.1 PLC CNC Machine Controller+Handwheel MPG

Four options are available for you to choose from:

Package Include:

3 Axis DDCSV4.1:
  • 1 × 3 Axis DDCSV4.1 CNC offline stand alone motion controller
  • 1 × 4GB USB flash drive
  • 1 × USB extension cable and other small accessories
  • 1 × parallel port link cable
  • 1 × Breakout Board
  • Pdf. English User manual 
3 Axis DDCSV4.1+MPG:

  • 1 × 3 Axis DDCSV4.1 CNC offline stand alone motion controller
  • 1 x 4 Axis Handwheel MPG with E-Stop
  • 1 × 4GB USB flash drive
  • 1 × USB extension cable and other small accessories
  • 1 × parallel port link cable
  • 1 × Breakout Board
  • Pdf. English User manual 
4 Axis DDCSV4.1:

  • 1 × 4 Axis DDCSV4.1 CNC offline stand alone motion controller
  • 1 × 4GB USB flash drive
  • 1 × USB extension cable and other small accessories
  • 1 × parallel port link cable
  • 1 × Breakout Board
  • Pdf. English User manual 

4 Axis DDCSV4.1+MPG:
  • 1 × 4 Axis DDCSV4.1 CNC offline stand alone motion controller
  • 1 x 4 Axis Handwheel MPG with E-Stop
  • 1 × 4GB USB flash drive
  • 1 × USB extension cable and other small accessories
  • 1 × parallel port link cable
  • 1 × Breakout Board
  • Pdf. English User manual 

3/4 Axis Offline controller DDCS V4.1+Handwheel MPG

3/4 Axis DDCSV4.1 Offline Standalone Motion Controller

Introduction

The DDCS V4.1 3-4 axis motion controller for stepper and servo system, is updated from DDCS V3.1 on software and hardware. It combines great advancement with tiny footprint of each days from past 8 years. The DDCS numerical control system adopts the ARM + FPGA design framework. ARM controls the human-computer interface and G-code analysis and the FPGA provides the underlying algorithms and creates the control pulse. This ensure reliable control and easy operation. The internal operating system is Linux based.

The panel layout structure of the DDCS V4.1 is very rational to save space. All operations are controlled by only 17 keys and the keys are composite keys that can act as function keys or numeric keys. DDCS V4.1 support comprehensive Fanuc G code set. The DDCS can be used for many styles and types of CNC machines. Lathes, Routers, Pick&Place and Mills are just a few examples. The DDCS operates as a Stand Alone system without the need of a computer. This ensure high precision, accuracy and reliability. The interface, even though very comprehensive, can be learned in a very short time.

DDCSV4.1 Brief technical feature:

1) 18 photoelectric isolated digital inputs,3 photoelectric isolated digital outputs.

2) The spindle can be set as Analog spindle(0~10V) and also Servo spindle.

3) 3-4 axes motor Control. Difffferential Mode and Double Pulse Mode output signal for optional, Maximum interpolation pulse output frequency is 500Khz/Axis, 2-4 Axis linear interpolation, any 2 axis circular interpolation;

4) ARM9 main control chip,FPGA core algorithm chip.

5) 7 inches TFT screen, Size: 1024x600 Pixels, Resolution:72 Pixels/Inch; 17 operation keys.

6) The Power Supply for IO Port is 24VDC,minimum current is 0.5A, the Power Supply for Control ler system is also 24VDC,minimum current is 0.5A. Controller needs both power to work properly.

7) USB flflash disk support for G code fifile input; Can transfer the fifiles by Ethernet communication between the computer and DDCS V4.1 controller; No size limited of the G-code fifile.

8) Compatible with standard G-code, support popular CAD/CAM software, such as ArtCam, MasterCam, ProE, JDSoft SurfMill, Aspire, Fusion 360 and so on;

9) Support standard MPG.

10) Support function of“ Try cutting” (handwheel guiding) function. the distance.

11)Support Jog function for each axis (continuous, step, defifined distance), Customer can defifine

12)Support Float Probe, Fix Probe, Vertex Probe and Tool Length Measurement.

13) Support the operation of quickly go to specify line and closest position. cal machining.

14) Support Array Machining, Sequence Machining, Milling Plane Machining, and Milling sylindri-

15) Support Bias for XYZA axis, and can defifind the Bias distance.

16) Support Pause breakpoint, Power-Cut Recovery Beakpoint and loaded breakpoint; And Support Start from the specifific line and closest line.

17) Support Multiple origin points operation, the users can create an origin point and load it.

18) Support Find Middle for X and Y axis.

19) Improved the simulation function. During the simulation, you can adjust the FRO and observe whether the programming path meets the expectations and check the soft limits. During the simulation, it can be paused, and when press the Start key again, the system will continue to simulate from the pause breakpoint.

20) Slave X, Slave Y Or Slave Z, for Gantry machine with two independent motors on main axes.

21) Now English and Chinese language is avaliable; System also suppport International coding, almost support all language, the users can add their own language to the control system.

22) DDCS V4.1 Only Supports NPN Type Limited Switch.

23) Support 4 kinds operation rights: visitor, operator, admin, super admin.

DDCS V4.1 Stepper/Servo Control Output

The stepper/servo control output,we cite differential Pulse and Direction output method.By the Para #012~015, the users can configurate the drive mode for the 4 axis.

Max. output frequency is 500Khz, please take attention to the max. pluse input frequency of the driver.

Limit, Home and Probe Inputs

  • The digital input circuit has the mechanical limit switch connection method and the open collector of the triode connection method. It supports the NPN type proximity limit switch.
  • The example above, we already set at Submenu “Input signal Para” in the Parameters page as:
  • #151: X axis Home port is 03, then IN03 is the X axir home signal input port;
  • #152: Y axis Home port is 06, then IN06 is the Y axir home signal input port;
  • #153: Z axis Home port is 09, then IN09 is the Y axir home signal input port.
  • #156: Probe Port is 13, then IN13 is the probe signal input port.

Extended Function Inputs

  • #250~#253 Extended function key functions: 0 "Start"; 1 "Pause"; 2 "XY Zero"; 3 "Z Zero"; 4 "Home"; 5 "Floatting probe"; 6 "Fixing probe"; 7 "Vertex probe"; 8 "X 1/2"; 9 "Y 1/2; 10 "extkey1.nc"; 11 "Disable". The users can select the function as they want.
  • Take the example, how to defind the “Start”, “Pause” and “E-stop”Extended function to the external keys.
  • By Submenu “Input signal Parameters” in the Parameters page:
  • Set “#157 External emergency stop port” to No. 16 input port; Set “#158 Extended Function Key 1 Port” to No. 14 input port; “#159 Extended Function Key 1 Port” to No. 15 input port.
  • Then set #250 to 0, then define input port 14 as “Start”; Set # 251 to 1, to defind the input port 15 as the "Pause".
  • The users also can edit Macro to self-define the external key function by “extkey.nc“.
  • The appendix also includes a list of macro definitions.

READ MORE

DDCS V4.1 Spindle control outputs

  • DDCS V4.1 Support 2 kinds Spindle Mode: Analog Spindle / Servo Spindle (PUL+DIR). By Para #188 configurate the spindle as Analog or Servo Spindle, By Para #189 we select the servo spindle channel. Here we take the example of the analog spindle.
  • The spindle control output ports (OUT01-OUT03) offer connections for Start and Stop of the Spindle (M3/M5), Start/Stop of Cooling (M8/M9), Start/Stop of Lubrication (M10/M11). These three output terminals are signals open to ground. The highest electric current can be absorbed is 50mA. The speed controlling output terminal can output 0-10V. It can adjust the speed of the spindle motor by sending the voltage between 0 and 10V to the VFD according the the Spindle Speed Setting.
  • The above Figure shows the wiring with Sunfar VFD.

1) The internal of the analog circuit is isolated from the IO power supply, and it is forbidden to short-circuit with IO power supply.

2) M3 is the spindle forward rotation output or start-stop output;

3) If the IO port is not powered, even if the inverter is connected correctly, it will not work; all IO ports must be powered to work properly.

When the spindle mode is Servo spindle, we need to choose the servo spindle channel, and wire with according driver ports to the spindle servo driver.

Needs two power supplies

  • COM+ and COM- is the power input ports for Input/Output Port and MPG, 24V and GND is the power input ports for controller system. Please keep in mind,only when the two power supplies are connected correctly the controller can be work properly.
  • The DDCS V4.1 is a small box that can fit in a window of a small control box or control cabinet.
  • Four locking hooks fix this controller from the frame. The dimension you find in Figure 1-3.
  • The front panel is 237mm * 153.7mm * 5.2mm;
  • The main body is 237mm * 153.7mm * 48.2mm;
  • To mount the unit in an equipment cabinet, cut the hole 228.5mm * 83.7mm

DDCS V4.1 the new features comparing with DDCS V3.1

  • 1.Can transfer the files by Ethernet communication between the computer and DDCS V4.1 controller.
  • 2.Slave X, Slave Y Or Slave Z, for Gantry machine with two independent motors on the main axes.
  • 3.Servo Spindle can be connected to PUL/DIR output when selected;
  • 4.We add Polar coordinate programming commands and Rotation commands, and completed Radius compensation commands on DDCS V4.1 controller.
  • 5.DDCS V4.1 controller upgrades the motion algorithm, by Machining profile accuracy configuration, makes a long g-code program with short line segments running smoother.
  • 6.No matter how big program file it is, system can quickly active the function of Start from Specified line and Start from closest point in few seconds.
  • 7.Improve the simulation function. During the simulation, you can adjust the FRO and observe whether the programming path meets the expectations and check the soft limits. During the simulation, it can be paused, and when press the Start key again, the system will continue to simulate from the pause breakpoint.
  • 8.DDCS V4.1 added driver alarm input ports, and can configurate the ports No.as you want.Same as DDCS-Expert.
  • 9.We add cycle encoder for A axis, which is good for unlimited rotation for A axis.
  • 10.Added the window for analysis prompt.
  • 11.Suppport International coding, almost support all language, the users can add his language for the control system.
  • 12.Increased the Parameters about the acceleration when Estop, to avoid collision by Stop when Estop the machine in high speed, edit the related parameters and system can give a smooth stop, this means there is no position loss.
  • 13.System FPGE cited 32 -bit speed generator, with higher resolution for the speed / acceleration, it means higher positioning accuracy.

Pendant Handwheel with Emergency stop

Specification:

  • 1. x1, x10, x100 switch
  • 2. X,Y,Z,4th axis selector switch
  • 3. LED indicator
  • 4. With Emergency stop
  • 5. High quality professional chassis
  • 6. extendable high quality shielded cable cord
  • 7. Magnetic base holder can place anywhere on the machine steel surface
  • 8. Required 5V+, 150mA, power for MPG

More informations:

  • Resolution:100PPR
  • Supply Voltage:DC5V +/-5%
  • Supply Current:≤80mA
  • Output Voltage:≥2.5V and ≤0.4V
  • Output Current:<40mA
  • Fall/Rise time:≤5ns(typ)
  • Switch:X1,X10,X100
  • Axis Switch:OFF,X,Y,Z,4
  • Response Frequency:0-10KHz

Description:

The CNC 4 Axis handheld controller MPG Pendant with x1, x10, x100 selectable, You are bidding one complete unit of the MPG pendant with Emergency stop for 4 axis CNC machine, it equipped with our popular machined MPG unit with 4 axis and scale selector, LED indicator also send feedback from the CNC machine to user about the status of the unit.

This handwheel comes with a plug,so it's "Plug and play


Payment

We accept payment through PAYPAL only.

Shipping                                                                                                

1.Items will be shipped within 1-2 days upon the receipt of payment.

2.Please check out your address carefully when processing order.We are not responsible for wrong or undeliverable address.

We will ship item to your PAYPAL address. If other address, please advise us by eBay or E-mail.

3.The estimated delivery time is 7~15 workings days to Asian, USA, AU, UK and most western European countries;

15~30 workings days to most other countries.

Return&Refund                                                                         

1.Any reason required for all refund.Item must be in it's original condition and no physical damage,buyer responsible for all shipping cost.

2.When you have the parcel,and not satisfied the goods or it is other problem like as broken,pls tell us the detail reason and provide the photos,we will help you to solve any problems.

Contact                                                                                                

1.If you are not satisfied, please contact us to resolve any issues. Please do NOT leave negative feedback without asking for help. We work hard to make sure EVERY CUSTOMER 100% satisfaction.

2.For any inquiries,issues or assistanceplease contact us via eBay or leave your mail address.

3.All emails will be answered within 1-2 working days.If you do not receive our reply,please kindly re-send your email and we will reply to you as soon as possible.

  • Condition: Brand New
  • Model: 3 Axis DDCSV4.1
  • Brand: RATTM MOTOR
  • Keys: 17 operation keys
  • Nominal Rated Input Voltage: 24 V
  • Power input: 24V DC
  • Resolution ratio: 1024*600
  • Frequence: 500Khz
  • Axis: 3/4 Axis

PicClick Insights - 4 Axis 500KHz Offline System DDCS V4.1 PLC CNC Machine Controller+ Handwheel MPG PicClick Exclusive

  •  Popularity - 13 watchers, 0.0 new watchers per day, 574 days for sale on eBay. Super high amount watching. 0 sold, 3 available.
  •  Best Price -
  •  Seller - 3,153+ items sold. 0.4% negative feedback. Great seller with very good positive feedback and over 50 ratings.

People Also Loved PicClick Exclusive