Boswell - Mild Steel, Stainless, Aluminium TIG FILLER RODS - Welding Welder Rod Full 1 Meter Long, Identification Marking on Each Rod

$34.90 Buy It Now, FREE Shipping, 30-Day Returns, eBay Money Back Guarantee
Seller: Top-Rated Seller weldpro_weldingsupplies ✉️ (10,894) 100%, Location: Williamstown, AU, Ships to: AU, Item: 281690875317 Boswell - Mild Steel, Stainless, Aluminium TIG FILLER RODS - Welding Welder Rod. <!-- 0065,store_name --> - Official eBay Store

SELECTION GUIDE:

ALUMINIUM ER5356

  • 5356 filler metal is the most common aluminium alloy for general purpose welding and is typically used in the construction industry in fabricating truck trailers, small fishing boats, and any 5XXX series alloys.
  • Classification:
    1. AWS A5.10 ER5356
    2. EN ISO 18273 / SG Al Mg 5

ALUMINIUM ER4043

  • ER4043 is one of the oldest and most widely used welding and brazing alloys. It can be classified as a general purpose type filler alloy. The silicon additions result in improved fluidity to make the alloy a preferred choice by welders. This alloy is less sensitive to weld cracking and produces brighter welds.
  • Classification:
    1. AWS A5.10 ER4043
    2. EN ISO 18273 / SG-Al Si 5

MILD STEEL ER70S-6

  • ER70S-6 is a mild steel TIG welding wire that contains higher levels of manganese and silicon than other standard grades of TIG wire to produce high quality welds when used on dirty, oily, or rusty steel. The high silicon content increases the fluidity of the weld pool, thus creating a smoother bead appearance and resulting in minimal post-weld grinding. This wire is engineered to provide porosity-free, x-ray quality welds at the highest tensile strength (as welded) of all the plain carbon steel wires.
  • Classification:
    1. AWS A5.18 ER70S-6
    2. EN ISO 14341 3Si1 DIN 8559 SG2

STAINLESS STEEL ER308L

  • 308L has a good general corrosion resistance. It also has a low carbon content which makes this alloy particularly recommended where there is a risk of intergranular corrosion. The alloy is widely used in the chemical and food processing industries as well as for pipes, tubes and boilers. ER308L Stainless Steel filler rod is suitable for general stainless steel welding applications of all type 304, 304L, 308, 308L, 312 and 347 materials.
  • Classification:
    1. AWS A5.9 ER308L
    2. EN 12072 / SG X2 Cr Ni 19 9

STAINLESS STEEL ER309L

  • ER309L has the same qualities as ER309 but with the lower carbon content deemed necessary in many chemical applications. ER309L has a good general corrosion resistance. When used for joining dissimilar materials the corrosion resistance is of secondary importance.
  • Classification:
    1. AWS A5.9 ER309L
    2. EN 12072 / SG X2 Cr Ni 24 12

STAINLESS STEEL ER316L

  • 316L has a good general corrosion resistance, particularly against corrosion in acid and chlorinated environments. The alloy has a low carbon content which makes it particularly recommended where there is a risk of inter-granular corrosion. The alloy is widely used in the chemical and food processing industries as well as in ship building and various types of architectural structures.
  • Classification:
    1. AWS A5.9 ER316L
    2. EN 12072 / SG X2 Cr Ni Mo 19 12

Boswell - Mild Steel, Stainless, Aluminium, Silicon Bronze TIG FILLER RODS - Welding Welder Rod

$29.90 - $189.90

DESCRIPTION DELIVERY WARRANTY / RETURNS DISCLAIMER

SELECTION GUIDE:

ALUMINIUM ER5356

  • 5356 filler metal is the most common aluminium alloy for general purpose welding and is typically used in the construction industry in fabricating truck trailers, small fishing boats, and any 5XXX series alloys.
  • Classification:
    1. AWS A5.10 ER5356
    2. EN ISO 18273 / SG Al Mg 5

ALUMINIUM ER4043

  • ER4043 is one of the oldest and most widely used welding and brazing alloys. It can be classified as a general purpose type filler alloy. The silicon additions result in improved fluidity to make the alloy a preferred choice by welders. This alloy is less sensitive to weld cracking and produces brighter welds.
  • Classification:
    1. AWS A5.10 ER4043
    2. EN ISO 18273 / SG-Al Si 5

MILD STEEL ER70S-6

  • ER70S-6 is a mild steel TIG welding wire that contains higher levels of manganese and silicon than other standard grades of TIG wire to produce high quality welds when used on dirty, oily, or rusty steel. The high silicon content increases the fluidity of the weld pool, thus creating a smoother bead appearance and resulting in minimal post-weld grinding. This wire is engineered to provide porosity-free, x-ray quality welds at the highest tensile strength (as welded) of all the plain carbon steel wires.
  • Classification:
    1. AWS A5.18 ER70S-6
    2. EN ISO 14341 3Si1 DIN 8559 SG2

STAINLESS STEEL ER308L

  • 308L has a good general corrosion resistance. It also has a low carbon content which makes this alloy particularly recommended where there is a risk of intergranular corrosion. The alloy is widely used in the chemical and food processing industries as well as for pipes, tubes and boilers. ER308L Stainless Steel filler rod is suitable for general stainless steel welding applications of all type 304, 304L, 308, 308L, 312 and 347 materials.
  • Classification:
    1. AWS A5.9 ER308L
    2. EN 12072 / SG X2 Cr Ni 19 9

STAINLESS STEEL ER309L

  • ER309L has the same qualities as ER309 but with the lower carbon content deemed necessary in many chemical applications. ER309L has a good general corrosion resistance. When used for joining dissimilar materials the corrosion resistance is of secondary importance.
  • Classification:
    1. AWS A5.9 ER309L
    2. EN 12072 / SG X2 Cr Ni 24 12

STAINLESS STEEL ER316L

  • 316L has a good general corrosion resistance, particularly against corrosion in acid and chlorinated environments. The alloy has a low carbon content which makes it particularly recommended where there is a risk of inter-granular corrosion. The alloy is widely used in the chemical and food processing industries as well as in ship building and various types of architectural structures.
  • Classification:
    1. AWS A5.9 ER316L
    2. EN 12072 / SG X2 Cr Ni Mo 19 12

SILICON BRONZE ERCuSi-A

  • Silicon Bronze ERCuSi-A TIG Filler Rod is a copper-silicon alloy used to weld similar composition base metals, brass, and to weld these copper alloys to steel. Due to its low melting temperature, Silicon Bronze is the number one choice for automotive panel work as it has low panel distortion.
  • Classification:
    1. AWS A5.7 ERCuSi-A
    2. EN ISO 24373S Cu 6560 (CuSi3Mn1)

Unless otherwise specified, all purchases are dispatched within one business day.

Your item will be sent via TNT Courier or Australia Post depending on its size and weight.

1 Year Warranty

We warrant our products to be free from defects in materials and workmanship for 1 year. The warranty does not replace parts that are considered to be normal wear consumables.

We require that all parts claimed under warranty be sent back to us for inspection, repair or replacement. The buyer is responsible for all postage costs of returning the faulty part.

Once the faulty part is inspected and is considered as manufacture defect, we will repair or send a new part. Buyer will not be charged for the postage costs to send the replacement part back to the buyer.

This warranty does not cover the following conditions: Damage resulting from misuse, neglect, alteration, accidents, tampering, abuse, fire, war, insurrection, civil disorder, flood, or any other casualty; Damage due to improper or excessive use or any other cause with the exception of manufacture defect.

Parts purchases, consumables, and accessories are not covered by the above warranty once used. Should your parts or consumables arrive with a manufacturer fault please contact us within 30 days to discuss prior to using the item.

Please be advised that Boswell Industry Australia, the seller of this product, its directors, staff and associates are not responsible for any injuries to self or third party, death or property damage caused as a result of using this product. This shall include, but not be limited to damages for loss of profits, business interruption, business reputation, goodwill or any other intangible loss arisen.

We used every reasonable endeavor to ensure this listing is correct at the time of publication. Whilst all care is taken, any errors in this listing are completely unintentional.

By bidding on this item, the buyer indicates that they accept all terms and conditions above.

Recommended For You

Boswell - 0.8mm x 1KG Gasless E71T-GS Flux Cored MIG WELDING WIRE

$29.90

Boswell - 2.4mm x 2KG Aluminium ER5356 TIG FILLER RODS

$44.90

BOSWELL 200AMP AC DC TIG WELDER INVERTER ALUMINUM PULSE

$1195.00

PLASMA CUTTER BOSWELL INVERTER INVERCUT 40R CUTTING MACHINE

$549.00

GENERAL
  • Home
  • About Us
    About Us

    Welding equipment and supplies. Leading brand welders and plasma cutters at affordable price! New Eyerex Welding Helmet is now on sale! Made in Switzerland, with 1yr warranty. All products are EN, CE, ANSI and C-Tick certified. All prices are GST inclusive.

    X CLOSE

PRODUCTS
  • Boswell Welder & Plasma Cutter
  • Welding & Cutting Consumables
  • Eyerex Helmet Switzerland

SUPPORT
  • Contact Us
    Contact Us

    You can contact us directly via eBay messages & we will get back to you shortly.

    X CLOSE
  • Delivery
    Delivery

    Unless otherwise specified, all purchases are dispatched within one business day.

    Your item will be sent via TNT Courier or Australia Post depending on its size and weight.

    X CLOSE
  • Warranty & Returns
    Warranty & Returns

    1 Year Warranty

    We warrant our products to be free from defects in materials and workmanship for 1 year. The warranty does not replace parts that are considered to be normal wear consumables.

    We require that all parts claimed under warranty be sent back to us for inspection, repair or replacement. The buyer is responsible for all postage costs of returning the faulty part.

    This warranty does not cover the following conditions: Damage resulting from misuse, neglect, alteration, accidents, tampering, abuse, fire, war, insurrection, civil disorder, flood, or any other casualty; Damage due to improper or excessive use or any other cause with the exception of manufacture defect.

    Parts purchases, consumables, and accessories are not covered by the above warranty once used. Should your parts or consumables arrive with a manufacturer fault please contact us within 30 days to discuss prior to using the item.

    X CLOSE
  • FAQ
    FAQ

    FAQ content coming soon.

    X CLOSE

© 2019 Boswell Industry Australia
  • Condition: Brand New
  • Filler Rod Type: Aluminium ER5356
  • Filler Rod Diameter: 1.6mm
  • Net Weight: 1 KG
  • Brand: Boswell

PicClick Insights - Boswell - Mild Steel, Stainless, Aluminium TIG FILLER RODS - Welding Welder Rod PicClick Exclusive

  •  Popularity - 572 watchers, 0.2 new watchers per day, 3,243 days for sale on eBay. Super high amount watching. 117 sold, 10 available.
  •  Best Price -
  •  Seller - 10,894+ items sold. 0% negative feedback. Top-Rated Plus! Top-Rated Seller, 30-day return policy, ships in 1 business day with tracking.

People Also Loved PicClick Exclusive