Galvanised Hex Head Metal NEO Seal Self Drilling Screw Tek Roofing Class 3/4/B8

$8.00 Buy It Now, FREE Shipping, 30-Day Returns, eBay Money Back Guarantee
Seller: Top-Rated Seller fastenersgalore1 ✉️ (80,806) 99.8%, Location: Murarrie, QLD, AU, Ships to: AU, Item: 123259077639 Galvanised Hex Head Metal NEO Seal Self Drilling Screw Tek Roofing Class 3/4/B8.
  • Store
  • |
  • About Us
  • |
  • Terms
  • |
  • Payment
  • |
  • Delivery
  • |
  • Returns
  • |
  • Technical
  • |
  • Contact
ALL CATEGORIES
Technical Specification
Product Self Drilling Metal Screws
Head Type Hex Flange Head
Neo Washer YES
Screw Size Choose from the dropdown above
Thread Pitch (TPI) Refer to the Dropdown Above
Thread Type Refer to the Dropdown Above
Length - From under the head Choose from the dropdown above
Head Diameter +/- 8g = 1/4", 10g & 12g = 5/16", 14g = 3/8"
Head Flange Diameter +/- 8g = 10.50mm, 10g = 11.40mm, 12g & 14g = 14.70mm
Head Height +/- 8g = 4.10mm, 10g = 4.80mm, 12g & 14g = 6.80mm
Drill Point Length - APPROX 8g & 10g = 6.70mm, 12g & 14g = 9.43mm
Min - Max Steel Thickness 8g = 1 ~ 2.5mm, 10 & 12g & 14g = 1.20 ~ 3.5mm
Driver Bit Size 8g = 1/4", 10g & 12g = 5/16", 14g = 3/8"
Material Hardened Steel
Finish - Our Discretion Galvanised Class 3 / 4 / B8
Brand - Our Discretion Hobson / Bremick / Tower
Quantity Choose from the dropdown above
Product Information
  • Hex Flange NEO Self Drilling Metal Screw Galvanised have a drill point that create their own hole and thread in one action and an EPDM water tight sealing washer. Commonly used for cladding and metal roofing, HVAC duct, clips and brackets, carports, sheds, garages, steel framing, fencing and general construction.
  • Easy to install using a 1/4" Socket for 8 gauge, 5/16" Socket for 10 and 12 gauge and 3/8" Socket for 14 gauge or appropriate driver bit in a power tool.
  • Galvanised coated fasteners have been used for roofing, cladding, steel buildings, trailers, bridges, fencing, power poles, outdoor furniture, house framing, fencing and marina?s for over 150 years. Since galvanising was first introduced, we have seen a lot of new terms like Class 3, Class 4, B8, Climaseal 3, Climaseal 4, Climaseal 5, Armour Ceramic Coating, Mechanical Galvanised and Ruspert. They are all variations of the original galvanise. All metal self drilling screws from Bolt and Nut Australia are guaranteed to comply to a minimum of Class 3 and extend to Class 4 and the ultimate of protection B8. Please refer to our technical pages for more information or contact us for advice on choosing the right fastener
  • TPI stands for "threads per inch" which literally means the number of threads within each inch on a screw, a bolt, or a fastener. To determine the TPI of a screw, count the number of threads contained within an inch of length on the fastener. If the screw is less than an inch count 1/2" of an inch and multiply by 2.
  • A twist drill style hardened point for fast driving into light gauge sheeting, cladding panels, sections and assemblies. The length of the drilling flutes determine the amount of drilling swaft that can be expelled and therefore the depth of metal can be drilled
  • Photos are for illustrative purposes only and may not be the actual diameter, finish or length
  • Every effort has been made to ensure all measurements are accurate, they should only be used as a guide
  • Our stock is sourced from various manufacturers, therefore differences may exist between batches such as visible stamped head markings and thread lengths, we will only ever ship the same brand per delivery
  • This is a MULTI-VARIATION listing, pick your configuration and pack size from the dropdowns above BUY IT NOW on a mobile phone or desktop
  • Select the item(s) you want, add them to your cart, once your cart exceeds $75 you will recieve an additional 5% discount off your order, over $200 it is a 10% discount
  • If you are looking for another type, diameter, length, width, material or pack size use the store search box on our store page
  • Need help? message us through eBay
  • Price Includes GST, Tax Invoice And Free Delivery Anywhere In Australia
Suppliers
BOLTS - METRIC BOLTS - IMPERIAL SOCKET SCREWS - METRIC SOCKET SCREWS - IMPERIAL MACHINE SCREWS - METRIC MACHINE SCREWS - IMPERIAL NUTS - METRIC NUTS - IMPERIAL WASHERS - METRIC WASHERS - IMPERIAL HARDWARE TOOLS NUTSERTS - FLANGE NUTSERTS - COUNTERSUNK NUTSERTS - RUBBER / WELL NUTS FASTENER KITS METAL SCREWS - BUTTON METAL SCREWS - COUNTERSUNK METAL SCREWS - DECKING METAL SCREWS - FLAT METAL SCREWS - HEX METAL SCREWS - WAFER TIMBER SCREWS - BUGLE BATTEN TIMBER SCREWS - BUTTON TIMBER SCREWS - CHIPBOARD TIMBER SCREWS - COUNTERSUNK TIMBER SCREWS - DECKING TIMBER SCREWS - HEX TIMBER SCREWS - PARTICLEBOARD TIMBER SCREWS - PLASTERBOARD TIMBER SCREWS - WAFER SELF TAPPERS - BUTTON SECURITY SELF TAPPERS - CSK PHILLIPS SELF TAPPERS - CSK SECURITY SELF TAPPERS - MUSHROOM PHILLIPS SELF TAPPERS - PAN PHILLIPS MASONRY - DROP IN ANCHORS MASONRY - HOLLOW WALL ANCHORS MASONRY - NAIL IN / PIN ANCHORS MASONRY - SCREWS BOLTS MASONRY - SLEEVE ANCHORS MASONRY - SPRING TOGGLES MASONRY - WALL MATES MASONRY - WALL PLUGS MASONRY - WEDGE ANCHORS POP RIVETS - DOME POP RIVETS - COUNTERSUNK POP RIVETS - LARGE FLANGE ALL THREAD PINS & CLIPS DRILLING DRIVER BITS
ebay listing template design by
  • Condition: Brand New
  • Screw Diameter & Length: 8g-18 x 12mm (Full Thread)
  • Pack Quantity: 10
  • Head Height +/-: 8g = 4.10mm, 10g = 4.80mm, 12g & 14g = 6.80mm
  • Drill Point Length +/-: 8g & 10g = 6.70mm, 12g & 14g = 9.43mm
  • Min - Max Steel Thickness: 8g = 1 ~ 2.5mm, 10 & 12g & 14g = 1.20 ~ 3.5mm
  • Driver Bit Size: 8g = 1/4", 10g & 12g = 5/16", 14g = 3/8"
  • Water Seal: YES
  • Material: Hardened Steel Galvanised Class 3 / 4 / B8
  • Freight Free: FREE delivery anywhere in AUSTRALIA
  • Australian Stock: YES, supplied & despatched ex BRISBANE
  • Tax Invoice Supplied: YES
  • Product: Hex Metal Self Driller
  • Size: Choose from the dropdown above
  • Thread Pitch (TPI): Refer to the Dropdown Above
  • MPN: T9PM4SH0818012
  • Brand: Hobson
  • Thread Type: Refer to the Dropdown Above
  • Head Diameter +/-: 8g = 1/4", 10g & 12g = 5/16", 14g = 3/8"
  • Head Flange Diameter +/-: 8g = 10.50mm, 10g = 11.40mm, 12g & 14g = 14.70mm

PicClick Insights - Galvanised Hex Head Metal NEO Seal Self Drilling Screw Tek Roofing Class 3/4/B8 PicClick Exclusive

  •  Popularity - 56 watchers, 0.0 new watchers per day, 2,080 days for sale on eBay. Super high amount watching. 0 sold, 10 available.
  •  Best Price -
  •  Seller - 80,806+ items sold. 0.2% negative feedback. Top-Rated Plus! Top-Rated Seller, 30-day return policy, ships in 1 business day with tracking.

People Also Loved PicClick Exclusive