description:
【Heat fast and heat fast】
30W soldering iron tube length 7.8cm (3 inches), the tip of the extension of 2.5cm (1 inch), the power cord length 150cm (59 inches). 30W electric iron rapid heating (2-4 minutes). The soldering tool is designed to upgrade the heat-resistant material and the steel pipe 28 vent holes to help dissipate heat.
【High-quality solder wire and rosin】
can ensure that each solder joint is firm and beautiful
【Suction tin copper wire】
can absorb excess solder or remove the parts have been absorbed by the soldering iron soldering.
【Wide range of application】
Iron kit is the best gift for DIY lovers to repair mobile phones, tablet PCs, PCs, televisions, radios, remote control cars, children's toys, jewelry, musical instruments, craftsmanship.
Why choose us
Amazon's most complete iron kit. It is equipped with electric iron, 5 spare welding head, solder wire, rosin, bracket and a variety of accessories. Do not need to buy other accessories from the Amazon store. You can easily handle PCB projects, solder loose wires and circuits, solder jewelry. Repair complex phone, computer, TV, radio. Replace the TV capacitors or accessories, and hobbies, toys such as RC cars, UAVs and so on.
How to solder:
1. The first time to use iron, it will come out from the tip of smoke. The smoke will disappear in a short time, the smoke will never appear again.
2. Prepare solder and soldering iron. In particular, the tip must be kept clean, where the solder should be coated.
3. When soldering, when the tip is covered with oxide and black, you need to rub in the rosin rub, and use solder wire to it on the tin, to keep the tip of the tip of the 1 / 4--1 / 2 area is Bright on tin state.
4. Use soldering iron to heat the welding parts, such as PCB wires and pads, and keep the iron evenly heated.
5. When the temperature is high enough, place the wire at the joint and the solder will melt and flow freely.
6. Do not pull out the tip and use it in this way, which will shorten the service life of the heating element.
7. During soldering iron is connected to power, it should be placed on the electric iron frame, do not mess up, so as to avoid accidents. After turning off power, it should be fully cooled after around 20 minutes.
The kit includes:
1x 30W external electric soldering iron
5x spare soldering tips
1x 12 grams (0.42 ounces) of solder wire
1 x 12 grams (0.42 ounces) rosin
1x 1.5 m (59 inch) suction tin copper wire
1x A stainless steel tweezers
1x Simple stainless steel electric iron stand
1x High temperature sponge
1x Desoldering Pump
1x Wishful pliers
1x small brush
30W electric iron technical parameters
Operating voltage 110V / 60HZ
Power: 30W
In normal operation, the tip temperature of the 30W soldering iron tip can reach 380 ° C (716 ° F)
caveat:
Abuse can cause burns and fires. Please strictly observe the following:
1. Follow the instruction manual.
2. Do not touch the metal parts of the soldering iron.
3. Do not use a soldering iron near a combustible.
4. This product is strictly prohibited when any damage, especially if the power cord is damaged.
5. Before replacing the tip, make sure the power is off and the tip is cooled.
6. It is forbidden to insert the soldering iron into a power adapter larger than 125V. Only 110V power adapter can be inserted.
Shipping: USA order will ship from USA, it takes 2-3 business days to arrive, other orders will ship from China 3-4 weeks by registered air mail, thank you
eBay Cross Border Trade powered by ChannelEffect