Digital Monitor LCD Watt Meter DC Ammeter Battery Power Volt Amp Analyzer Car AU

Description Features:
1. The shell of the battery tester is made of high-strength material, sturdy, wear-resistant, and not easily broken.
2. Equipped with an LCD display screen, it can simultaneously display 9 sets of measurement parameters, and various parameters are clearly visible.
3. This instrument is mainly used to measure the voltage, discharge current, discharge power, discharge impedance, internal resistance, capacity, remaining electricity, cumulative energy consumption, and operating time of various batteries.
4. The multifunctional battery tester has high-precision chip control, good electronic performance, and safe and reliable welding process.
5. The power consumption is related to the value of the test voltage. The higher the voltage, the greater the power consumption.

Specifications:
Product style (optional):  battery tester with 50A diverter; battery tester with 100A diverter; battery tester with 200A diverter; battery tester with 300A diverter
【Voltage】
Measurement range: 0-200V (<8V requires external power supply)
Display format: ＜ 10V display, such as 9.99V, ＜ 100V display, such as 99.9V, ≥ 100V display, such as 199V
Minimum resolution: 0.01V
Starting voltage: 0.05V
Measurement accuracy: 1%
【Current】
Measurement range: 0-10A (model: PZEM-013)
0-300A (model: PZEM-015), can be set with four ranges of 50A, 100A, 200A, and 300A, according to the specifications of the external diverter,
Factory default 100A
Display format:
<1A display, such as 999mA
<10A display, such as 9.99A
＜ 100A display, such as 99.9A
≥ 100A display, such as 199A
Minimum resolution: 1mA
Starting current: 10mA (model: PZEM-013), 20mA (model: PZEM-015)
Measurement accuracy: 1%
【Power】
Measurement range: 0-2000W or 0-60000 W
Display format:
＜ 10W display, such as 9.99W
＜ 100W display, such as 99.9W
Display less than 1000W, such as 999W
＜ 10000W display, such as 9.99kW
≥ 10000W display, such as 19.9kW
Minimum resolution: 0.01W
Starting power: 0.1W (model: PZEM-013), 0.2W (model: PZEM-015)
Measurement accuracy: 1%
【Impedance】
Impedance=voltage/current
Measurement range: 0-1000 Ω
Display format:<100 Ω Display example: 99.9 Ω
≥ 100 Ω display, such as 999 Ω
Display "---" when the range is exceeded or the current is 0
Minimum resolution: 0.1 Ω
Measurement accuracy: 1%
【Internal resistance】
Internal resistance=(full charge voltage load voltage)/load current, when the load voltage is greater than the highest voltage, the internal resistance is 0.
Measurement range: 0-999m Ω
Display format: 999m Ω, display "---" when the range is exceeded or the current is 0
Resolution: 1m Ω
Measurement accuracy: 1%
Note: Before measuring the internal resistance, the full charge voltage should be pre-set according to the specifications of the battery used, and then measured after fully charging; If not fully charged, the battery can be set
The no-load voltage is the full charge voltage, and then measure it; The internal resistance is not a fixed value, the more the battery is discharged, the greater the internal resistance.
【Capacity measurement】
Measurement range: 0-1000AH
Display format:<1AH, such as: 999mAH
＜ 10AH, such as 9.99AH
＜ 100AH, such as 99.9AH
<1000AH as shown in: 999AH
Minimum resolution: 1mAH
Measurement accuracy: 1%
Note: Battery capacity testing is the cumulative process of discharge current over time, which requires a certain amount of time. The specific amount of time depends on the size of discharge current; Before testing capacity
The full charge voltage and cut-off voltage should be pre-set according to the specifications of the battery used, and then fully charged before conducting a discharge test. When the remaining battery is displayed as
When the space is blank, it indicates the end of discharge, and the displayed capacity value is the battery capacity.
【Remaining power】
The remaining battery capacity is displayed through the battery symbol, consisting of 10 cells, with each cell representing 10% of the battery capacity.
The remaining power is calculated based on the current battery voltage value. Before testing, the full charge voltage and cut-off voltage should be pre-set according to the specifications of the battery used; Every voltage=(maximum
High voltage - minimum voltage)/10.
【Accumulated energy consumption】
Measurement range: 0-9999kWh
Display format:<1 kWh Display example: 999Wh
<10 kWh displayed as: 9 99kWh
＜ 100kWh display, such as 99.99kWh
＜ 1000kWh display, such as 999.99kWh
≥ 1000kWh display, such as 9999kWh
Zero overflow
Minimum resolution: 1Wh
Measurement accuracy: 1%
Note: 1Wh=0.001kWh=0.001 kWh
【Running time】
Range: 0-999 hours (no time for empty load)
Format: 0:00:00~999:59:59 (overflow to zero)

Package List:
LCD battery tester * 1
Cable * 1
Diverter * 1
Instructions * 1 Payment Shipping Returns Contact Us 1.We only accept payments through PayPal (which supports Visa, MasterCard, Discover, American Express, or Echecks). Paypal is a secure payment method for both seller and buyer in ecommerce.
1.Items will be sent out in Handle Time on payment received from Monday to Friday. Orders during weekends and holidays will be posted in the following working day.
1.In our store, you will enjoy 30 days return/refund guarantee (Excluding misuse of the item and damaged item).


2.If the item you received is faulty, damaged or incorrect, or any further problems, you can return it for replacement or refund, please contact our customer service on eBay within 30 days from item received.



3.For damaged items on arrival, please contact us immediately, sending us an email with a photo is preferred. We will offer solutions to such cases. Full refund or replacement will be guaranteed. All messages will be answered within 1~2 business day. If you do not receive our reply, please kindly re-sent your message and we will reply to you as soon as possible.

• Condition: Brand New
• Choose: 50A
• Brand: Unbranded
• Type: LCD battery tester
• Shell material: ABS
• Model: Watt Meter,Voltmeter Ammeter

See More