DSLRKIT MID6P2UE Passive PoE Injector Switch
8 Ports (2Uplink, 6 PoE) 10/100Mbps
Passive PoE Power pin(4,5+/7,8-)
24V 3A 72Watt Wall Mount
Compatible 24V Ubiquiti PoE
This is a special PoE Switch with 24V DC out, it can not Compatible with 802.3af(48v). It could work only on some special customized 24V PoE device(e.g Ubiquiti 24V PoE device) please confirm your device is using DC 24v PoE before you purchase this PoE Switch. If you can not figure out the PoE voltage of your device, we suggest you to buy 48v PoE Switch which can follow 802.3af agreement.
Compatible 24V Ubiquiti PoE:
UBNT AP/UAPThis is an Passive Power Over Ethernet of 8 port 10 / 100Mbps-T Ethernet switches, including 6 Passive PoE Ethernet ports and 2 Uplink ports. With an external 110V-240VAC to 24VDC power supply adapter, any one of the 6poe port can provide output power, each Ethernet port can provide network transmission speeds of up to 10 / 100Mbps , with Cat5 / 5e / 6 network cable.
Which do not compatible with IEEE 802.3af and IEEE 802.3at, this is an unusual non-standard 24 V unsolicited Power Over Ethernet switch. It supplies power NO MATTER WHAT, so don't plug the ports "1~6" side into anything that isn't ready for it.
This POE switch only support 10/100M connection, do not support gigabit ethernet connection, because "1~6" port using 4,5,7,8 pin as power transfer, Please do not connect any gigabit ethernet device on "1~6" port, this will damage your device.
Gigabit(10/100/1000Mbps) ethernet device Please do not access "Power Link port" this will damage your device.
Features:
Specification:
ALL Port: | Standard 10/100Mbps Ethernet port. Support 10Mbps Ethernet and 100Mbps Fast Ethernet, can operate in full-duplex or half-duplex mode,must work with 4 pairs UTP Cat5/5e/6 cable。 | |||||
RJ45 Port 1-6: | Unsolicited power on pairs (4,5+/7,8-) pins, 24V |
Power LED | LED ON: power on. LED OUT: power off | |||||
Yellow Light LINK/ACT | LED ON Indicates the port is connected to a network device and has been started | |||||
LED OFF Indicates that this port is not connected to a network device or has not been started |
Standard | IEEE 802.3 10BASE-T Ethernet | |||||
IEEE 802.3u 100BASE-TX Fast Ethernet | ||||||
IEEE 802.3x Full-Duplex flow control | ||||||
Protocol | CSMA/CD Ethernet | |||||
Data Transfer Rate | Ethernet: 10Mbps (Half Duplex),20Mbps (Full Duplex) | |||||
Fast Ethernet: 100Mbps (Half Duplex) ,200Mbps (Full Duplex) | ||||||
Network Media(Cable) | 10Base-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100 Ω STP (maximum 100m) | |||||
100Base-TX:UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100 Ω STP (maximum 100m) | ||||||
PoE Power on RJ45 | Power +: pin 4 & pin 5 ; Power -: pin 7 & pin 8 | |||||
DC Output: 24V, Per port Max 1A or 24Watt, 4POE ports Total 3A(Max. 72Watt) | ||||||
Number of Ports | 8 x10/100Mbps Auto-Negotiation RJ45 ports with 6 PoE enabled (port-1 ~ port-6) | |||||
AC Power Adapter | AC Input: 110V ~ 240VAC, 50Hz ~ 60Hz. | |||||
DC OutPut: 24V/3A | ||||||
Power Consumption | 3.2 Watts (max. no PD connected) | |||||
According to the actual power consumption of equipment | ||||||
Temperature | Operation Temperature:0 ~40 ℃ (32 ~104 ℉ ) | |||||
Storage Temperature: -40 ~70 ℃ (-40 ~158 ℉ ) | ||||||
Humidity | Storage Humidity 5%~90% non-condensing, Operating Humidity 10%~90% non-condensing | |||||
Product Dimensions | 140mm W x 56mm D x 28mm H | |||||
RAM Register Capacity | 64K bytes per device | |||||
MAC Address List | 1K entries per device | |||||
Frame Forward Rate | 10Mbps Ethernet: 14880pps/Port | |||||
100Mbps Ethernet: 14880pps/Port |
Item Included:
8pots 6PoE Unsolicited(Passive) PoE switch x1 AC Power Adapter(DC OutPut: 24V/3.0A) x1 AC Power Cable x1
AC power plug is US or EU type,if you need other type (AU or UK),Please leave a message.
12 Months Warranty from the date of purchase.