1. Computers/Tablets & Networking
  2. 3D Printers & Supplies
  3. 3D Printer Parts

  4. 3D Printer Upgrade Parts 1/2m PTFE Teflon Bowden Tube 1.75mm High Temp 280°C

3D Printer Upgrade Parts 1/2m PTFE Teflon Bowden Tube 1.75mm High Temp 280°C 1 of 1FREE Shipping See More
See Details on eBay available at Amazon

3D Printer Upgrade Parts 1/2m PTFE Teflon Bowden Tube 1.75mm High Temp 280°C

$7.97 Buy It Now, FREE Shipping, eBay Money Back Guarantee
Seller: mcvoss ✉️ (9,106) 99.6%, Location: Melbourne, AU, Ships to: AU, Item: 304260898860 3D Printer Upgrade Parts 1/2m PTFE Teflon Bowden Tube 1.75mm High Temp 280°C. Features： 1. High Lubricity Additives makes this the lowest friction Bowden tubing on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills. 2. Lower retraction means time saved every time in the extruder retracts. Over the course of a print, a few milliseconds here and a few there can save a lot of time. 3. 1.9mm ± 0.05mm Inner Diameter Reduces the "wiggle room" or buckling inside the tube which allowing you to print flexible filaments even on the longest Bowden systems. 3.5. Outside diameter = 4mm 4. High Temperature Resistance. Because we only use the highest quality PTFE. Up to 280° C Note 1: This tube is not quite as tight as the Capricorn brand tubes, and will therefore be suitable for filaments bought on ebay (which have wider tolerances and tend to get stuck in Capricorn tubes). I threw out my Capricorn tube after experiencing under extrusion due to using cheap ebay filaments instead of Prusament $50/Kg filament. The tube in this listing is more forgiving and more suitable for cheapskates like me :) Note 3: If you are concerned about high heat ruining your tube (whether it's Capricorn or not), just buy yourself an all metal throat. It will last forever and make your tube (whether it's Capricorn or not) last forever too! Check our listing for all metal throats. NOTE RE Parcel Lockers / Parcel Collect: We recommend against using a parcel locker/parcel collect for this item. This item is sent in a letter. Australia Post Policy says "Letters and standard mail that can be delivered to your letterbox, including Express Post letters, will not be accepted." It is true, however, that Australia Post staff at some locations will deliver letters to lockers. If you provide a parcel locker (or parcel collect) address, we will send the item in a letter. We will assume that you know the situation in your area and how the Auspost personnel will handle the situation. Be aware that in some case, Auspost has been known to return the letter to the sender when it's addressed to a parcel locker. The above also applies for the Express Post option
  • Condition: Brand New
  • Item Length: 100cm
  • Colour: White
  • Filament Diameter: 1.75 mm
  • Material: PTFE
  • Type: Bowden Tube
  • Compatible Model: for 3D printers
  • Brand: Unbranded

PicClick Insights - 3D Printer Upgrade Parts 1/2m PTFE Teflon Bowden Tube 1.75mm High Temp 280°C PicClick Exclusive

  •  Popularity - 34 watchers, 0.0 new watchers per day, 858 days for sale on eBay. Super high amount watching. 13 sold, 10 available.
  •  Best Price -
  •  Seller - 9,106+ items sold. 0.4% negative feedback. Great seller with very good positive feedback and over 50 ratings.

People Also Loved PicClick Exclusive