Qty 200 Internal Circlip 32mm Stainless G420 DIN 472 Snap Ring Clip

$380.00 Buy It Now, FREE Shipping, 30-Day Returns, eBay Money Back Guarantee
Seller: Top-Rated Seller fastenerkitsonline ✉️ (87,947) 99.9%, Location: 4172, AU, Ships to: AU, Item: 235246749285 Qty 200 Internal Circlip 32mm Stainless G420 DIN 472 Snap Ring Clip.
Visit Our Ebay Store Item Description
  • Internal Circlip are the most common type of circlip for bores with grooves. The circlip has a large free diameter and gap width, consequently it fits more tightly into the groove and provides higher and more uniform thrust load capacity. Lugs with holes are provided for rapid fitting or removal with circlip pliers
  • Applications: They are often found in applications that require a part to turn, spin or pivot, and are used within electric motors, turbines, pistons, electronics and many other areas that require bearings. Circlips help to solve problems such as clearance diameter, tolerance take-up and thrust load capacities
  • Material / Coating: Stainless Steel G420 is a general purpose basic high hardenability martensitic steel with higher strength, hardness and wear resistance than G410. This is generally used for cutlery and surgical instruments, valves, gears, shafts, cams, shear blades, etc. Under hardened conditions, G420 steels are resistant to fresh water, alkalis, air, foods and mild acids. The corrosion resistance of G420; however, is lower than that of G410, G316 and G304. Stainless steels are largely non-magnetic but it is common for stainless steel fasteners to show a small degree of magnetism which is a result of work-hardening during the manufacturing process
  • Can Stainless corrode?: Stainless steel is corrosion-resistant but not corrosion-proof and�corrosion can occur if the material is installed or handled incorrectly.�The use of�tools and drills made from conventional steel�during the installation of�stainless steel fasteners�may also lead to problems. Even the hardest of tools can produce debris that�leaves minute steel particles on the stainless steel fastener surfaces�or in pre-drilled holes. It is these particles that�often�rust when exposed to moisture or oxygen and can result in a stained or tarnished finish�to the stainless steel material
  • Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you see a problem with our specifications please contact us
  • Dimensions: Our stock is sourced from various suppliers, therefore differences may exist between batches such as height, width, visible stamped markings, appearance or actual finish
  • Photos: All photos are for illustration purpose only. Actual product or packaging may vary due to product enhancement
  • Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
  • Disclaimer: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Fastener Kits Online is not responsible for any loss, claim or damages arising therefrom. In developing this information, Fastener Kits Online has made a determined effort to present it accurately
  • Buy with confidence: ⇒ 10+ years experience selling online, > 19,000 stock lines, > 80 million pieces ex stock in Brisbane QLD
  • Prices: include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
  • Internal Circlip are the most common type of circlip for bores with grooves. The circlip has a large free diameter and gap width, consequently it fits more tightly into the groove and provides higher and more uniform thrust load capacity. Lugs with holes are provided for rapid fitting or removal with circlip pliers
  • Applications: They are often found in applications that require a part to turn, spin or pivot, and are used within electric motors, turbines, pistons, electronics and many other areas that require bearings. Circlips help to solve problems such as clearance diameter, tolerance take-up and thrust load capacities
  • Material / Coating: Stainless Steel G420 is a general purpose basic high hardenability martensitic steel with higher strength, hardness and wear resistance than G410. This is generally used for cutlery and surgical instruments, valves, gears, shafts, cams, shear blades, etc. Under hardened conditions, G420 steels are resistant to fresh water, alkalis, air, foods and mild acids. The corrosion resistance of G420; however, is lower than that of G410, G316 and G304. Stainless steels are largely non-magnetic but it is common for stainless steel fasteners to show a small degree of magnetism which is a result of work-hardening during the manufacturing process
  • Can Stainless corrode?: Stainless steel is corrosion-resistant but not corrosion-proof and�corrosion can occur if the material is installed or handled incorrectly.�The use of�tools and drills made from conventional steel�during the installation of�stainless steel fasteners�may also lead to problems. Even the hardest of tools can produce debris that�leaves minute steel particles on the stainless steel fastener surfaces�or in pre-drilled holes. It is these particles that�often�rust when exposed to moisture or oxygen and can result in a stained or tarnished finish�to the stainless steel material
  • Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you see a problem with our specifications please contact us
  • Dimensions: Our stock is sourced from various suppliers, therefore differences may exist between batches such as height, width, visible stamped markings, appearance or actual finish
  • Photos: All photos are for illustration purpose only. Actual product or packaging may vary due to product enhancement
  • Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
  • Disclaimer: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Fastener Kits Online is not responsible for any loss, claim or damages arising therefrom. In developing this information, Fastener Kits Online has made a determined effort to present it accurately
  • Buy with confidence: ⇒ 10+ years experience selling online, > 19,000 stock lines, > 80 million pieces ex stock in Brisbane QLD
  • Prices: include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
Specification  
Product Internal Circlip
Size 32mm
Closest Size in Imperial 1-1/4"
System of Measurement Metric
Bore Diameter 32.00mm
Groove Size G 33.70mm
Groove Width 1.30mm
Thickness T 1.20mm
Circlip Outside Diameter D 34.40mm
Hole Size Min D5 2.50mm
Lug Height Max A 5.40mm
Max Ring Dia B 3.20mm
Material Stainless Steel
Grade G420
Corrosion Protection Level Very Good
Finish Stainless G420
Standard DIN 472
Brand Inox World
Alternative Brands Bolt and Nut Australia
MPN ICLA2M32
Delivery Free Shipping
Number in Pack 200
ebay listing template design by
  • Condition: Brand New
  • Product: Internal Circlip
  • Size: 32mm
  • Closest Size in Imperial: 1-1/4"
  • System of Measurement: Metric
  • Groove Size G: 33.70mm
  • Groove Width: 1.30mm
  • Thickness T: 1.20mm
  • Circlip Outside Diameter D: 34.40mm
  • Material: Stainless Steel
  • Grade: G420
  • Corrosion Protection Level: Very Good
  • Finish: Stainless G420
  • Standard: DIN 472
  • Brand: Inox World
  • MPN: ICLA2M32
  • Delivery: Free Shipping
  • Number in Pack: 200
  • Bore Diameter: 32.00mm
  • Hole Size Min D5: 2.50mm
  • Lug Height Max A: 5.40mm
  • Max Ring Dia B: 3.20mm
  • Alternative Brands: Bolt and Nut Australia

PicClick Insights - Qty 200 Internal Circlip 32mm Stainless G420 DIN 472 Snap Ring Clip PicClick Exclusive

  •  Popularity - 0 watchers, 0.0 new watchers per day, 173 days for sale on eBay. 0 sold, 7 available.
  •  Best Price -
  •  Seller - 87,947+ items sold. 0.1% negative feedback. Top-Rated Plus! Top-Rated Seller, 30-day return policy, ships in 1 business day with tracking.

People Also Loved PicClick Exclusive