24 X Weicon Zinc Spray - Highest Quality Cold Galvanising Corrosion Prevention

$447.70 Buy It Now, FREE Shipping, 30-Day Returns, eBay Money Back Guarantee
Seller: Top-Rated Seller swift_supplies_online ✉️ (2,384) 100%, Location: Beenleigh, AU, Ships to: AU, Item: 123187378412 24 X Weicon Zinc Spray - Highest Quality Cold Galvanising Corrosion Prevention. 24 x 400ml Cans of Weicon Zinc Spray - Premium Grade Galvanising Spray made with Zinc Flakes for superior rust protection. Unlike many other types of Zinc Sprays and Cold-Gal sprays, Weicon Zinc Spray is manufactured using very high purity zinc flakes, rather than zinc pellets.
  • 24 x 400ml Cans of Weicon Zinc Spray - Premium Grade Galvanising Spray made with Zinc Flakes for superior rust protection.
  • German-Engineered, High Quality Spray-On Zinc for Permanent Rust and Cathodic Corrosion Protection.
  • Manufactured with very high purity zinc flakes for superior protection than sprays made with zinc pellets.
  • Bonds to all metal surfaces and dries to form a high-purity, high metal content barrier that withstands extreme weather and temperatures.

Weicon Zinc Spray is a very high quality form of cold galvanising spray used to permanently protect exposed metal. Once applied, Zinc Spray will form a fast-drying and extremely long lasting protective layer. This layer will protect the coated surface from moisture and prevent rust or cathodic corrosion.

Unlike many other types of Zinc Sprays and Cold-Gal sprays, Weicon Zinc Spray is manufactured using very high purity zinc flakes, rather than zinc pellets. The flakes naturally settle to form a more robust, harder to penetrate protective layer which allows our Zinc Spray to provide extremely good, long-term performance.

This performance has been tested in the DIN 53167 and DIN 50021 Salt Spray Test wherein a surface coated with Zinc Spray is bombarded with concentrated salt. In these conditions, Weicon Zinc Spray lasted over 550 hours. That may not sound like long but it is roughly equal to 8+ years of natural weathering in Australian conditions.

Weicon Zinc Spray is manufactured from a combination of high purity (99.9% pure) Zinc and Aluminium Pigments combined with a styrenated alkyd resin binding agent. It will stick to all metal surfaces and does not need a primer to be applied beforehand. Once it’s dried, the percentage of metal in the dry film is a (very high) 70%.

Zinc Spray will be dust dry around 15 minutes after application and hardened after about 12 hours. It can be painted over, but should be left for 24 hours before you do so. Fully hardened Zinc Spray will withstand temperatures between -50°C and +500°C.

Coatings created with this Zinc Spray will be abrasion resistant and very long lasting. It has also been subjected to the DIN EN ISO 1519 mandrel bend test where it exhibited no hair cracking (important if you are applying it to parts that may more and shift like gate fixtures).

Zinc Spray has a colour that matches that of slightly weathered Zinc (RAL 9006) and is approved by the German-TUV (German technical inspection association). Zinc Spray also fulfils higher requirements than those required by the demanding, DIN EN ISO 1461 standard.

Applications for Weicon Zinc Spray
  • As an anti-rust primer for metal that will be painted or coated.
  • For coating and protecting welded joints
  • Protecting exposed metal edges on galvanised parts and fixtures
  • For protecting and coating drilled holes
  • As a conductive intermediate layer for spot welding
  • In many, many other applications where metal parts need to be protected from corrosion.
Technical Specifications
ColourZinc (Grey, Slightly Weathered) (RAL 9006)
Areas of UseIndoors and Outdoors
Binding AgentStyrenated Alkyd Resin
PigmentFlaky Zinc and Aluminium Pigments
Pigment Purity99.9% (Both Zinc and Aluminium)
Percentage of Metal in the Dry Film70% (Approx.)
Specific Gravity1.1 - 1.3 g/cm³
Suggested PrimerNot Required
Processing Temperature+5°C to +35°C (Ideal is 18°C - 25°C)
Consumption w/ 1.5 Cross Coats150ml / m² (Approx.)
Layer Thickness w/ 1.5 Cross Coats30-50μm
Dust Dry15 Minutes (Approx.)
Hardened12 Hours (Approx.)
Paintable24 Hours (Approx.)
Abrasion ResistantYes
Cross-Cutting (DIN 53151 / ISO 2409)Cross Cut Characteristic Value GT 0
Salt Spray Test (ISO 9227)>550 Hours
Mandrel Bend Test (DIN EN ISO 1519)No Hair Cracking
Top CoatingNot Required
Temperature Resistance (After Complete Hardening)-50°C to +500°C
IMPA Reference45 08 11
ISSA Reference53.402.06
  • Condition: Brand New
  • Percentage of Metal in the Dry Film: 70% (Approx.)
  • Consumption w/ 1.5 Cross Coats: 150ml / m² (Approx.)
  • Dust Dry: 15 Minutes (Approx.)
  • Hardened: 12 Hours (Approx.)
  • Abrasion Resistant: Yes
  • Salt Spray Test (ISO 9227): >550 Hours
  • Mandrel Bend Test (DIN EN ISO 1519): No Hair Cracking
  • Can Size: 400ml
  • Temperature Resistance (After Cure): -50°C to +500°C
  • Top Coating: Not Required
  • Brand: Weicon
  • Colour: Zinc (Grey, Slightly Weathered) (RAL 9006)
  • Areas of Use: Indoors and Outdoors
  • Binding Agent: Styrenated Alkyd Resin
  • Pigment: Flaky Zinc and Aluminium Pigments
  • Pigment Purity: 99.9% (Both Zinc and Aluminium)

PicClick Insights - 24 X Weicon Zinc Spray - Highest Quality Cold Galvanising Corrosion Prevention PicClick Exclusive

  •  Popularity - 0 watchers, 0.0 new watchers per day, 2,107 days for sale on eBay. 0 sold, 1 available.
  •  Best Price -
  •  Seller - 2,384+ items sold. 0% negative feedback. Top-Rated Plus! Top-Rated Seller, 30-day return policy, ships in 1 business day with tracking.

People Also Loved PicClick Exclusive