Reptile Heating Mat Pet Heating lizard Supply Warmer / Temperature Controller AU ✅5W/7W/14W/20W✅Waterproof✅Dual Heating✅Day Night Timer✅

Details

Lerway Heat mat 

---

Features

【Wide Use】Suitable for tortoise, snake, lizard, gecko, spider, a variety of reptiles, amphibians and small animals like dogs and cats 【Working Quietly】--Heat and temperature uniform, no pollution and working noise 【Energy Saving】--Low wattage, power saving and security,no electricity leakage, low temperature operation. 【Adjustable】--With a adjustable switch,extra thin design with maximum flexibility.The highest constant temperature not exceed 45 degrees

【Surface waterproof】, can not be immersed in water and moist environments.

---

Specification:

• Materiale: PVC
• Color: Black.
• Voltage Range: 220v- 240v (AU Plug)
• Potenza: 5 W, 7W,14 W,20W
• Regulating Range: 0-35 Degree
• Voltage: 220V-240V（AU） Cable Length: 4.2ft(140cm)

---

Size: 

5W 14x15cm  7W 15x28cm  14W 28x28cm 20W 42cm*28cm

 

 ITC-306 Temperature Controller

---

• Inkbird temperature controller is a pre-wired heating thermostat with a timing function, especially for reptile breeding, incubation, and cultivation.
• This heating thermostat can be set to two different temperatures with its dual function timing cycle for 24 hours after the day and night, which may better suited to the physiological needs of fish and aquarium plants.
• This thermostat has overheating protection and automatic temperature control for all kinds of electrical equipment for the greenhouse heater, and heat mat.
• With a dual LCD display, the temperature controller offers an optional display of Celsius or Fahrenheit, allowing humanized temperature control.
• The dual heating thermostat has Temperature calibration, the temperature may become more accurately controlled with its function of temperature calibration and temperature hysteresis.
• Plug & Play design, easy to use. Just plug the heater in sockets at the ITC-306, and set your desired temperature to be ok.
• Temperature range: -50~99 °C / -58~210 ° F. Maximum total output load: 2200 W (220 V).Input Power: 100 ~240VAC, 50Hz/60Hz. Temperature Control Output: Max. 10A, 100V ~240V AC

   

Product parameters

• Temperature Resolution: 0.1 ° C / 0.1° F
• Temperature Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F)
• Ambient Temperature: -30~ 75 ° C / -22~ 167°F
• Socket (UK Version): 140x51x27mm (5.5x2.0x1.0 inch)

Waterproof Metal probe

• The probe is waterproof made of food grade material.
• Waterproof level: IP68
• Sensor Length: 2m / 6.56ft

Dual Heating

• Both relays are all for heating,no cooling
• Input power:100-240VAC /50/60HZ
• Storage Temperature: -20~ 60 ° C / -4~ 140 ° F
• Storage Humidity: 20~85% (No Condensate)

There will be 2 situations when you use this reptile thermostat:

---

P'PV' is the current temperature

'SV' is the setting temperature

'TS' is your target value

'DS' is the differential value 'CA' is the calibrated value

'CF' is the unit of temperature (C or F)

'TR' is time setting ( 0:off / 1:on )

---

1.If you only need to control one temperature range the whole day:

Your ideal temperature range: 22~25C, the settings as follow:

TS1=25, DS1=3, CA=0, CF=C, TR=0

With this setting, when the PV actual temperature lower than TS1-DS1=25-3=22C, the work light will turn on and your heaters will start outputting until the temperature reaches 25C (TS1/SV), it will stop.

---

2.If you need to control different temperature range during day and night:

Your ideal temperature range: during 8:00~18:00, keep the temperature within 22~25C, during 18:00~8:00, keep the temperature within 27~25C

TS1=25, DS1=3, CA=0, CF=C, TR=1, TS2=27, DS2=2, TA=8, TB=18, TH=the hour of the current time when you set, TM= The minute of the current time when you set

During (8:00~18:00) TA~TB, the thermostat will work with TS1 and DS1. During (18:00~8:00) TB~TA, the thermostat will work with TS2 and DS2

---

Product parameters

• 1x ITC-306T Temperature Controller
• 1x NTC Sensor

---

Please pay attention to choose the item that you need.

If you need any help, please feel free to let me know later.

 

• Condition: Brand New
• Item: 2x Heat Mat 5W
• Brand: inkbird
• Type: Temperature controller/Heat Mat
• Temperature adjustment range: Rise 0-35 Celsius (Compared to indoor temperature)
• Voltage: 220V-240V（AU）
• Power and Size: 5W / 7W / 14W / 20W
• Material: Plastic
• Cable Length: 4.2ft(140cm)
• Pet Type: Lizard/frog/snake/spider/turtle/gecko
• Unit Quantity: 2pcs
• Colour: Black

See More