LCD1602/2004A I2C Board 16*2 Character LCD Display IIC I2C Interface DC5V New

• Home
• Arduino
• Module
• Sensor
• Chips
• About Us

2004A LCD 5V-White/Yellow/Blue

Product Feature:
1. Made of high quality material, durable and practical.
2. Wide temperature glass for clearer display.
3. Fully automatic electroplating line, environmentally friendly materials, uniform electroplating, good corrosion resistance.
4. AIP31066 or SPLC780D controller (COB process).
5. Standard 1x16 pin interface, widely used.
parameter:
Product Model: LCM2004A
Dimensions: 98.0mmX60.0mm
Display content: 20 characters X4 lines
Interface mode: single row parallel port
Working voltage: 5V
Controller: SPLC780D
LCD operating temperature: -20℃~70℃
LCD storage function: -30℃~80℃
Wide temperature LCD: -30℃~80℃   Precautions:
Liquid crystal displays are made of glass, organic sealants, organic fluids, and polymer-based polarizers. When handling, pay attention to the following:
1. Keep the temperature within the range of use and storage. Excessive temperature and humidity can cause polarization degradation, polarizer peeling, or air bubbles.
2. Do not touch the exposed polarizer with anything harder than HB pencil lead. Remove the dust from the surface of the monitor, gently use cotton
To wipe, soak a deerskin towel or other soft material in cleaning oil.
3. Immediately wipe off saliva or water droplets. Excessive contact time of ITO with water will cause deformation or discoloration of the surface of the liquid crystal display.
4. Glass is easily broken due to rough handling. Especially in corners and edges.
5. Do not drive the LCD with DC voltage.   welding:
1. Solder to I/O terminals only.
2. Only use a soldering iron that is properly grounded and has no leakage.
3. Soldering temperature: 280℃±10℃
4. Welding time: 3 to 4 seconds.
5. Low temperature solder filled with resin flux.
6. If flux is used, the LCD surface should be covered to avoid flux spattering. Flux residues should be removed after shielding.   operate:
1. The viewing angle can be adjusted by changing the LCD driving voltage V0.
2. The driving voltage should be kept within the specified range. Excessive voltage will shorten the life of the display.
3. The response time increases with decreasing temperature.
4. At temperatures above its operating range, the display may turn black or dark blue; this (but do not press
domain) may cause some display segments to "break".
5. Mechanical damage during operation (such as pressing the display area) may cause the line segment to "break".   Package list:
LCM2004A LCD screen*

1602LCD 5V-Yellow/Blue

1.Brand new and high quality.
2.LCD display module with blue blacklight.
3.Wide viewing angle and high contrast.
4.Built-in industry standard HD44780 equivalent LCD controller.
5.Commonly used in: copiers, fax machines, laser printers, industrial test equipment, networking equipment such as routers and storage devices.
6.LCM type: Characters
7.Can display 2-lines X 16-characters.
8.Operate with 5V DC.
9.Module dimension: 80mm x 35mm x 11mm.
10.Viewing area size: 64.5mm x 16mm.

Package Included:
1PC*LCD Display Module

1602LCD Blue/Yellow 5V W/I2C Module

Product features:
1. Support I2C protocol.
2. With backlight, and contrast adjustment potentiometer
3.4 line output is simpler
4. Provide library files
5. With backlight Features:
There are only 20 IO ports on the control board. If you add more sensors, SD cards, relays, etc., the IO ports are not enough. The original 1602 screen needs 7 IO ports to drive. This module we developed can help you save 5 Each I0 port, we] send the function library.   Product Specifications:
I2C address: 0x27
Backlight: (blue/yellow optional, blue screen is white characters, yellow-green screen is black characters)
Supply voltage: 5V
Size: 80*36*17.5mm
Comes with IIC interface, can be connected through DuPont line. Pin Description:
GND: ground wire
VCC: Power
SDA: I2C data line
SCL: I2C clock line Wiring method:
GND: GND ground wire
VCC: 5V connected to power
SDA: A4
SCL: A5   Package List:
1602 LCD 5V I2C adapter board module*1

12864LCD 5V-Yellow/Blue

12864 LCD Display Module 128x64 Dots Graphic Blue Color Backlight
This product is a LCD display module with blue backlight, small and light appearance, suitbale for copiers, fax machines, laser printers, industrial test equipment, networking
LCD display module with blue backlight.
Small and light appearance, it is easy and convenient to use.
Suitable for copiers, fax machines, laser printers, industrial test equipment,
networking equipment etc.
Backlight: Blue
View area: 7.0cm(L) * 4.4cm(W)
Dots size: 0.48mm (L) * 0.48mm (W)
Dots pitch: 0.52mm (L) * 0.52mm (W)
LCD type: STN (Blue)
Viewing angle: 6 o?clock
Operating temperature: -20 to 70 degree
Storage temperature: -30 to 80 degree

 

Specification:
Original box: No
Color: Green
Item size: 92*69*10mm
Net weight: 76g
Package weight: 85g

 

Package included：  

•  1PCS x  5V LCD Display Module 128x64 Dots Graphic Matrix LCD 12864 Blue Backlight New

IIC/I2C Interface LCD1602

Product selling point:
1. Power supply voltage: 5V
2. Support I2C protocol
3. With backlight, and contrast adjustment potentiometer
4.4 line output is simpler
5.IIC bus address: 0x27 Product parameters:
IIC/I2C interface LCD1602 adapter board without LCD screen
There are only 20 IO ports on the control board. If you add some sensors, SD cards, etc., there are many modules such as relays, and the IO ports are not enough.
The original 1602 screen needs 7 IO ports to drive, this module we developed can help you save 5 IO ports, we send the function library   Package List:
LCD1602 LCD screen adapter board* 1  

• Payment
• Shipping
• Refund

Payment

• We accept PayPal only. But we only Accept your Ebay Address ,Please Make sure it's 100% right.
• Payment must be received in 5 business days of auction closing.
• Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
• Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.

Shipping

Fill your shipping info

Refund

• All package need to wait 30 days (US only n eed 7-10 days) ,Please take care it.Less than 30 days,we can't take a refund.
• If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
• If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.

• Condition: Brand New
• select: 2004A LCD 5V-White
• Brand: Unbranded
• Type: LCD1602/2004A
• Model: LCD1602/2004A
• Custom Bundle: No
• Modified Item: No

See More