New Waste Oil Fluid Extractor Pump Manual Suction Vacuum Fuel Car Transfer AU

$27.01 Buy It Now, FREE Shipping, 30-Day Returns, eBay Money Back Guarantee
Seller: everybuying365 ✉️ (12,178) 98%, Location: Sydney, New South Wales, AU, Ships to: AU, Item: 404831652574 New Waste Oil Fluid Extractor Pump Manual Suction Vacuum Fuel Car Transfer AU.

DC 12V Oil Diesel Extractor Suction Pump Transfer Fluid Self-priming pump

Description:
This oil extractor transfer pump uses 12v mini self-priming pump to exchange car engine oil. It works by connecting the clamps to the 12V car-battery,and widely used in general industrial equipment, cause this pump can pump oil not only, also can pump hydraulic oil and other liquid. It is an ideal equipment for quick and clean oil-changes. 

Features: 
1. Widely used in general industrial equipment.
2. It works by connecting the clamps to the 12V car-battery.
3. An ideal equipment for quick and clean oil-changes. 
4. Simple on/off power switch, easy to use.

Specifications:
Rated Voltage: DC 12V
Rated Power: 60W
Maximum Pressure: Max. 0.8MPA
Maximum Flow: 5L/min
Pump Diameter: Approx. 4.8cm / 1.89"
Length: Approx. 14.5cm / 5.7"
Outlet Pipe Size(Dia.*L): Approx. 11mm*140cm / 0.43" * 55"
Inlet Pipe Diameter: Approx. 8mm & 6 mm / 0.31" & 0.24"
Inlet Pipe Length: Approx. 100cm / 39.37"
Cable Length: Approx. 30cm / 11.8"
Clips Length: Approx. 8cm / 3.15"
Main Color: Black
Application: Widely used in general industrial equipment, medical equipment, chemical equipment, shipbuilding, drinks, carpet and floor cleaning, water purification and water treatment equipment, vehicle cleaning, agricultural spraying, zo pipeline pressure, air cleaning cooling, coal and metallurgical industries

How to use:
1. Start to run the car engine for a while, when oil temperature turns to be about 50 degrees, start pumping oil.
2. Connect the pump to the power, run it for a while, and observe whether the inlet and outlet is normal.
3. Open the filler cap,get dipstick out, force the tube into the bottom of the joint, until the tube does not move; then put the inlet pipe from the oil dipstick into in end (the tube into the bottom of the tank, the bottom concave place, in order to pump the oil completely); as no oil or pumping up very slowly or intermittently, it is generally caused by loose pipes and fittings. You have to install the pipes and fittings again.)
4. After oil pumping, remove the tube, and then run the pump for a while, pump the remaining oil inside the pumping clean, or pump water for a while until the pump head gets clean.
5. If you have not used it for a long time, it may have no suction, then just pour the water in the pump, and run the pump for a few minutes until the air is all out.

Package List:
1 x oil pump
1 x 11mm outlet pipe
1 x 8mm inlet pipe
1 x 6mm inlet pipe
2 x clips

Note: 
1. Please allow 1-3mm error due to manual measurement. Thanks for your understanding.
2. If you want to connect this pump to AC power, you will need a power converter.

3. please use when the engine is warm, the engine oil is warm and viscosity is lower, this will be easier and faster to pump.

4. This product is not allowed to pump corrosive liquids, strong acids and strong alkaline liquids.

Postage

1.At present, we only ship to Australia by AU post. 2.Items will be dispatched within 24 hours after  payment is cleared. 3.Buyers have the full responsibility to provide us with the correct delivery address on checkout page before payment. 4.Any changes of address after checkout should be informed us before we send the item.

Feedback
  • We are always happy to answer your questions or resolve any issues you might have with the item you order. Pls contact us through messages. Questions will be answered within 48 hours normally. There is time difference, so please give us a little more time to help you.

  • If you are satisfied with our service, pls. kindly leave us a positive feedback and give us the Detailed Seller Rating with all "5 stars" in very area. 

  • Please don't leave us any neutral or negative feedback or low DSRs without contacting. Communication, then solution. Happy ebay shopping experience needs your kind cooperation!

  • Condition: Brand New
  • Outlet Pipe Size(Dia.*L): Approx. 11mm*140cm / 0.43" * 55"
  • Pump Diameter: Approx. 4.8cm / 1.89"
  • Clips Length: Approx. 8cm / 3.15"
  • Inlet Pipe Diameter: Approx. 8mm & 6 mm / 0.31" & 0.24"
  • Rated Voltage: DC 12V
  • Main Color: Black
  • Length: Approx. 14.5cm / 5.7"
  • Inlet Pipe Length: Approx. 100cm / 39.37"
  • Rated Power: 60W
  • Cable Length: Approx. 30cm / 11.8"
  • Maximum Flow: 5L/min
  • Maximum Pressure: Max. 0.8MPA
  • Rated Voltage (V): DC 12V
  • Brand: Unbranded
  • Type: Oil Extractor Pump Kit
  • UPC: 7679208569201

PicClick Insights - New Waste Oil Fluid Extractor Pump Manual Suction Vacuum Fuel Car Transfer AU PicClick Exclusive

  •  Popularity - 0 watchers, 0.0 new watchers per day, 28 days for sale on eBay. 0 sold, 3 available.
  •  Best Price -
  •  Seller - 12,178+ items sold. 2% negative feedback. Great seller with very good positive feedback and over 50 ratings.

People Also Loved PicClick Exclusive