Fast, in an Epic Way Crazy 600mm/s*. K1 is 12 times faster than a regular FDM 3D printer. Now, sit tight for the thrill of breathtaking speed. *The 600mm/s speed is achieved at Creality Lab in the Surface Mode with 0.1mm layer height. *The typical speed is 300mm/s. The travel speed is 800mm/s.
Always Print at Full Speed With 20000mm/s² acceleration, K1 ramps up to 600mm/s in only 0.03s, delivering full speed in 90% of the printing time.
Creality Print 4.3 with Speed Genes The latest self-developed slicer Creality Print 4.3 includes rich presets, and streamlines the slicing process into 3 simple stages. Even better, it bolsters high-speed printing with variable line width, arc path, and so on.
Model Cooling by Dual Fans A large fan on the printhead with air ducts cools the model directly. An 18W auxiliary fan in the build chamber enhances the cooling effect, too.
Cooling Effect Comparison The model hardens before any stringing and warping could happen. It allows support-free bridges and overhangs.
Print Right out of the Box K1 is assembled and calibrated before shipment and offers a boot-up quick guide. Just start printing the moment your K1 arrives.
Flexible Build Plate Sticky and heat-resistant, it works well with a wide range of filaments. The finely frosted surface makes the model bottom fine and smooth. Bendable for quick print removal.
Hands-free Auto Leveling An array of strain sensors are embedded in the heatbed to generate an accurate leveling mesh. The whole process happens on its own after the printing starts. You don't need to lift a finger or pay any attention
Printing Technology: FDM
Build Volume: 220*220*250mm
Product Dimensions: 355*355*480mm
Package Dimensions: 415*415*550mm
Net Weight: 12.5kg
Gross Weight: 16kg
Printing Speed: ≤600mm/s
Acceleration: ≤20000mm/s²
Printing Accuracy: 100±0.1mm
Layer Height: 0.1-0.35mm
Extruder: Dual-gear direct drive extruder
Filament Diameter: 1.75mm
Nozzle Diameter: 0.4mm(compatible with 0.6/0.8mm)
Nozzle Temperature: ≤300℃
Heatbed Temperature: ≤100℃
Build Surface: Flexible build plate
Leveling Mode: Hands-free auto leveling
File Transfer: USB drive, WiFi
Display Screen: 4.3" color touch screen
AI Camera: Optional
AI LiDAR: Optional
Power Loss Recovery: Yes
Filament Runout Sensor: Yes
Input Shaping: Yes
Lighting Kit: Yes
Sleep Mode: Yes
Rated Voltage: 100-120V~, 200-240V~, 50/60Hz
Rated Power: 350W
Supported Filaments: ABS, PLA, PETG, PET, TPU, PA, ABS, ASA, PC, PLA-CF, PA-CF, PET-CF
Printable File Format: G-Code
Slicing Software: Creality Print; compatible with Cura, Simplify3D, PrusaSlicer
File Formats for Slicing: STL, OBJ, AMF
UI Languages: English, Spanish, German, French, Russian, Portuguese, Italian, Turkish, Japanese, Chinese
K1 MAX 3D Printer
Ender-3 V2 Neo
Easy Assembly: New upgraded Ender-3V2- This 3D printer adopts the integrated structure, and comes with pre-installed parts, easy assembly, and stable structure. CR Touch Auto Bed Leveling: Upgraded CR Touch, 16-point automatic bed leveling technology saves you the trouble of manual leveling. Brand New 4.3 Inch UI User Interface: The upgraded UI adds a model preview function, making it easier to observe the printing shape and progress for customers. PC spring steel magnetic platform: New-released FDM 3d printer comes with a removable PC spring steel magnetic build plate, a combination of a PC coating, a spring steel sheet, and a magnetic sticker. The PC coating brings good adhesion to the model, and the finished models can be easily removed by bending the print sheet. Silent Motherboard: V4.2.2 mainboard adopts silent chips for low decibel operation, creating a quiet environment. Please contact the seller or Comgrow if you have any issue with the printer. Molding Technology: FDM Build Volume:: 220*220*250mm Machine Dimension: 438×424×472mm Package Dimension: 520×505×280mm Net Weight: 7.85kg Gross Weight: 9.85kg Printing Speed: 120mm/s Printing Precison: ±0.1mm Layer Height: 0.1mm-0.4mm Filament Diameter: 1.75mm Power Supply Brand: CREALITY Nozzle Diameter: 0.4 mm (standard) Nozzle Temperature: 260°C Heat Bed Temperature: 100°C Build Surface: PC Spring Steel Magnetic Build Plate Extruder: Bowden Extruder Extrusion Material: Full-metal Leveling Mode: CR Touch Display: 4.3'' Color Knob Screen Mainboard: 32-bit Silent Mainboard Resume Printing: Yes Rated Voltage: 115/230V,50/60Hz Rated Power: 350W/24V Slicing Software: Creality slicer/ Cura/ Simplefy 3d Data Transmission Method: Micro USB/TF Card 3D File Format: STL/OBJ/AMF Supported Filament: PLA/PETG/ABS Supported LanguageChinese, English
ENDER 3MAX NEO
【300 x 300 x 320mm Large Build Volume】:With the 300 x 300 x 320mm Large Build Volume and an open print chamber, you'll be able to print large 3D models with ease, or you can print several small models at the same time on the large build surface. 【CR Touch Automatic Leveling】:Equipped with CR Touch, the 16-point automatic leveling can complete quickly with compensation for points' printing height on the heat bed. Good efficiency saves much time. 【High-precision Dual Z-axis】:With a Z-axis dual-screw+Z-axis dual-motor design, Ender-3 S1 works smoother and more synchronously to lower the possibility of lines and ridges on the sides of your print, thus improving the printing quality. 【Power Loss Recovery and Filament Sensor】:Ender-3 S1 features the function of detecting filament runout or breakage/power loss and resume printing after recovery. By accurately recording the printing data at the time of power outage/filament runout or breakage, it helps to avoid the waste of filaments and time caused by accidents. 【Upgrade Red Metal Extruder & Low-noise Design】:The new upgraded extruder without pneumatic joint has high gear density, feed-in smoothly, greatly improving the performance of printer; and the brand-new 32-bit silent mainboard runs at low decibel levels, greatly reducing noise to let you enjoy your printing. Molding Technology: FDM Machine size: 516*582*590mm Build Volume: 300*300*320mm Package Dimension: 665*555*290mm Net Weight: 10.3kg Gross Weight: 13.5kg Printing Speed: ≤120 mm/s Printing Precison: ±0.1mm Layer Height: 0.05~0.35mm Filament Diameter: 1.75mm Nozzle Quantity: 1 Nozzle Diameter: 0.4 mm (standard) Nozzle Temperature: up to 260℃ Heat Bed Temperature: up to 100°C Build Surface: Carborundum Glass Extruder: Bowden Extruder Extruder Material: Full-metal Leveling Mode: CR Touch Auto-leveling Display: 4.3'' Color Knob Screen Mainboard: 32-bit Silent Mainboard Resume Printing: Yes Filament Sensor:Yes Rated Voltage: 100-120V~, 200-240V~, 50/60Hz Rated Power: 350W Slicing Software: Creality Slicer/Cura/Repetier-Host/Simplify3D Data Transmission Method: Micro USB/TF Card 3D File Format: STL/OBJ/AMF Supported Filament: PLA/ABS/PETG/Wood
ENDER-3S1
Features: 1.【"Sprite" Direct Dual-gear Extruder】: The "Sprite" is lighter and features less inertia and more precise positioning, supports PLA/TPU/PETG/ABS print filaments. 2.【CR Touch Automatic Bed Leveling】: 16-point automatic bed leveling technology saves you the trouble of manual leveling and makes leveling simple and easy. 3.【High-precision Dual Z-axis】: With a Z-axis dual-screw+Z-axis dual-motor design, Ender-3 S1 works smoother and more synchronously to lower the possibility of lines and ridges on the sides of your print, thus improving the printing quality. 4.【PC Spring Steel Printing Platform】: The innovative printing platform is a combination of a PC coating, a spring steel sheet and a magnetic sticker, the model can be sticked to the platform or take off more easier. 5.【Power Loss Recovery and Filament Sensor】: Ender-3 S1 features the function of detecting filament runout or breakage/power loss and resume printing after recovery. By accurately recording the printing data at the time of power outage/filament runout or breakage, it helps to avoid the waste of filaments and time caused by accidents. 6.【Low-noise Design】: The brand-new 32-bit silent mainboard runs at low decibel levels, greatly reducing noise to let you enjoy your printing. 7.【Quick Assembling】: 96% of the printer body is pre-installed, making assembling extremely convenient with only 6 steps and the maintenance of the printer simple and easy. Specification: "Sprite" Direct Dual-gear Extruder CR Touch Automatic Bed Leveling High-precision Dual Z-axis PC Spring Steel Printing Platform Power Loss Recovery and Filament Sensor 4.3-inch LCD Screen Strong Expandability Low-noise Design Quick Assembling Modeling Technology : FDM Supported Filaments : PLA/TPU/PETG/ABS Nozzle Diameter : 0.4mm Machine Net Weight : 9.1kg Type of Extruder: “Sprite" Direct Extruder Resume Printing: supported Mainboard : 32-bit silent mainboard Supported File Format : STL/OBJ/AMF Build Size : 220*220*270mm Printing Speed: 150mm/s at the maximum Filament Diameter : 1.75mm Extruder Gear ratio: 1:03.5 Automatic Bed Leveling: CR Touch Rated Power: 350 W Slicing Software : Creality Slicer/Cura/Repetier-Host/Simplify3D Printer Size: 487*453*622mm Printing Layer Thickness :0.05-0.35mm Number of Nozzles:1 Package Gross Weight:11.2kg Filament Sensor:supported Rated Voltage : 115/230v 50/60Hz 4.5/2.5A Software Language: Chinese/English Package Size: 540*510*260mm Printing Precision ±0.1mm Printing Platform:PC spring steel sheet Maximum Heatbed Temperature :100°C Screen:Knob color screen Printing Method :Type-C USB/SD card Maximum Nozzle Temperature :260°C ENDER 3S1 PROCreality Australia Ender 3 S1 Pro 3D Printer :
A new and improved version of the very successful Ender 3. Equipped with a newly developed direct dual-gear extruder, automatic bed leveling, 32-bit silent mainboard, among other things, the S1-Pro is a very affordable printer with everything you could wish for at this price point.
Sprite Full-Metal Direct Drive Extruder with dual gear
Ender 3 s1 and Ender 3 S1 Pro use direct-drive extruders. The distance is shorter in a direct drive and the retraction too. Ender-3 S1 Pro upgrade to full-metal dual-gear direct extruder with an extrusion force of 80N ensures smooth feeding when printing with different filaments. especially the flexible TPU.
Up to 300℃ high-temp printing support multiple filaments.
It's compatible with multiple filaments, such as PLA, ABS, PVA, Wood, TPU, PETG, and PA, providing more possibilities for creation.
Spring Steel PEI Magnetic Build Plate
It can handle high temperatures a lot better than the one used in Ender 3 S1. You can easly remove it if you want since it gets attached to magnetics well. It is compatible with ASA, TPU, PLA, Wood, PETG, PAHT, SILK as well as other types of filaments. It removes all the small issues you have while printing. It trully takes no effort to take out the print -when printing is over, you simply bend the base and the model detaches itself from it.
4.3-Inch Touch Screen & LED Light
The 4.3-inch touch screen, supporting 9 languages, offers efficient UI interaction and is easy to use. It will dim out automatically for energy-saving if there is no action for 3 minutes. The equipped LED light enables comprehensive light fill, with which users can observe the printing details even in a dark environment.
Ender 3 S1 Ender 3 S1 Pro | ||
Build volume | 220x220x270mm | 220x220x270mm |
Printer size | 487x453x622mm | 490x455x625mm |
Extruder | Sprite Direct Drive Dual Gear | Sprite Direct Drive Dual Gear |
Max. nozzle temperature | 260ºC | 300ºC |
Max. heatbed temperature | 100ºC | 110ºC |
Weight | 9.1kg | 8.6kg |
Interfaces | USB-C / SD | USB-C / SD |
Filament sensor | Yes | Yes |
Dual Z-axis | Yes | Yes |
Automatic levelling | Yes | Yes |
Motherboard | Silent motherboard, 32-bit | Silent motherboard, 32-bit |
Screen | 4.3 inch screen with button | 4.3 inch touch screen |
UI language | Chinese, English | Chinese, English, German, Spanish, French, Italian, Portuguese, Russian, Turkish |
ENDER 3S1 PLUS 【Larger Printing Size】Ender 3 S1 Plus 3d printer has a larger print size of 11.8*11.8*11.8inch compared to Ender 3, Ender 3 S1 and Ender 3 S1 Pro, which can print both large models and small parts, or print several small models at the same time on a large build surface, to achieve better printing results and larger print models. 【CR Touch Auto Bed Leveling】Creality Ender 3 S1 Plus 3d printers with CR-Touch 16-points automatic bed leveling, which can complete quickly adjust the the nozzle printing height on the hot bed, making the bed leveling more precise and saving the trouble of manual leveling. 【High-Precision Dual Z-Axis】Creality 3d printer has the dual Z-axis lead screws and dual motors design, this 3D printer works smoother and more synchronously to lower the possibility of lines and ridges on the sides of your print, thus improving the printing quality. 【Ensure Smooth Feeding】This 3d printers for beginners comes with the new upgraded "Sprite" Full Metal Dual-gear Direct Extruder comes with the pushing force up to 80N, lightweight and powerful, the extruder realizes smooth feeding and discharging of flaments without slipping and works extremely well in printing flaments like PLA, TPU, PETG, ABS, etc. 【4.3-Inch Touch Screen & Easy To Use】Ender 3 S1 Plus metal 3d printers is equipped with the 4.3-inch LCD, which enables click-to-control. It supports the switch among nine languages and will automatically dim out for energy-saving if there is no action for three minutes. 96% pre-installed, you can quickly install the printers with 6 steps. Power loss recovery supported and filament sensor installed.
Modeling Technology: FDM(Fused Deposition Modeling)
Build Volume: 300*300*300mm
Machine Dimension: 557*535*655mm
Package Dimension: 625*590*230mm
Net Weight: 10.25kg
Gross Weight: 13.4kg
Printing Speed: maximum 100 mm/s
Printing Precision: 100mm±0.2mm
Layer Height: 0.1-0.4 mm
Filament Diameter: 1.75 mm
Nozzle Temperature: up to 260°C
Heat Bed Temperature: Up to 100°C
Build Surface: Spring steel PC magnetic build plate
Extrusion Force: 80 N
Leveling Mode: Auto-leveling with CR-Touch
Display: 4.3-inch color touch screen
Motherboard: 32-bit silent motherboard
Rated Voltage: 100-120V, 220-240V, 50/60 Hz
Data Transmission Method: Type-C USB/ SD card
3D File Format: STL/OBJ/AMF
Supported Filament: PLA/ABS/TPU/PETG
Supported Language: Chinese, English, Spanish, German, French, Portuguese, Italian,Russian and Turkish
Nozzle Quantity: 1
Nozzle Diameter: 0.4 mm
Extruder: "Sprite" Full-metal Dual-gear Direct Extruder
Resume Printing: Yes
Filament Sensor: Yes
Rated Power: 350W/24V
Slicing Software: Creality Slicer/Cura/Repetier-Host/Simplify3D
PaymentShippingReturnsAbout usContact usPayment