Createx Colors 120ml size Candy 2o Warm Box Set 4967-D + Free Insured Post

We will send your item Australia Post Track & Trace including insurance for piece of mind!!

This kit is especially made including products such as Auto-borne  Silver undercoat thru to candy’s for artwork , reducer and intercoat, a flaming paradise!

May be applied to 95% of all work surfaces from illustration boards/helmets/skate decks/surf boards/signs/full automotive and much more…..

Great for real fire or true fire techniques on all hard surfaces

The Kit Includes 120ml Each

*4650 Blood Red

*4651 Sunset Magenta

*4652 Tequila Yellow

*4654 Grabber Orange

*4655 Marine Blue

*4659 Deep Purple

*4660 Poison Green

*4664 Black

*6013 Autoborne Sealer Silver ( Undercoat )

*4011 Reducer

*2 x *4030 Mixing Additive  ( mix 10% with candy’s, do not store mixed paints more than 72hrs )

4600 Series  - TRUE CANDY PERFORMANCE

Water-based, 100% Transparent Aniline Dyes. For use as airbrush paint and mid-coat over metallic base.

Mixing Guidelines

4030 is the original candy2O mix-additive and still works well for airbrushing. 4050 is an excellent carrier for candy2O; the mix stays uniform in suspension for even color formation during application. 4050 is especially beneficial when applying candy2O with a spray-gun. STRAIN BEFORE USING! Always pour candy2o through a strainer before using.

 Sediment (dye & dried resin) may form in solution. MIX RATIOS Airbrush: Mix 4030 Balancing Clear or 4050 Gloss Clear 10% per volume up to equal parts with candy2o.

 candy2o is airbrushed in a more concentrate mix compared to spray-gun use. Spray-Gun: Mix 4050 Gloss Clear 3:1 candy2o, then thin 5% - 10% per volume with 4011 Reducer.

Taping & Masking When applied as specified, candy2o may be taped on direct after 60 minutes air drying.

• If painting in high humidity, concentrated candy2o mixes or otherwise less than ideal drying conditions, apply 4040 Bleed Checker prior to taping.

• Use a vinyl or wax tape, avoid crepe-paper tapes. Base Coats for Candy Mid-Coat Finishes

• 4102 Aluminum for standard candy color

• 4333 Metallic Gold for “candy apple” color

• Apply over 4104 Quicksilver for anodized candy color, 4105 gold Plating for anodized candy apple

• Apply lighter colors such as 4653 Lemon Yellow over 4330 Metallic Fine or 4331 Metallic Coarse for brightest value.

• candy2O may be applied as a mid-coat over any Createx metallic, aluminum or pearlescent color.

• Each base color creates a different value of candy2o for a wide variety of finishes. When applying candy2O as a mid-coat over a metallic base, applying a “cheater coat” helps achieve uniform application, especially with darker valued candy2O colors. A cheater coat is a mid-layer between metallic base and candy2O made by mixing the two together, resulting in a more gradual transition between metallic base and candy. For example, when applying 4665 Brandywine over 4102 Aluminum Medium, a cheater coat would be made by mixing Brandywine and Aluminum Medium (mixing even parts works best) and applying over the Aluminum Medium, then applying Brandywine over the candy-aluminum mix. Candy-Pearl Colors Mix candy2O with Auto Air Pearlescent, Cosmic Sparkle & Hot Rod Sparkle Colors to for candy-pearl colors. Mix in equal parts candy2o, pearl-color and 4050 Gloss Clear, then thin 10% per volume 4011 Reducer. Apply over color-keyed AutoBorne Sealer Base or, with darker candy2o colors, over 6002 Sealer Black.

“Lock Down” Dyes with 4040 Bleed Checker candy2O’s dyes will leach (bleed) into top-coated colors & clears. 4040 Bleed Checker prevents this.

• Apply 2 coats of 4040, with 10 – 15 minutes drying in-between coats.

Available from Airbrush Megastore Australian Importer