TOPDON BT100 is a handy tool which allows you to check the battery status quickly and without spending so much on mechanic fees. Whether you are a professional car electrician or the proud owner of a home garage, you need this tool in your arsenal. You never know when your car battery would fail and this tool will help you diagnose it in seconds.
Functions
Use TOPDON BT100 to see whether your car battery is OK.
BATTERY TEST : Display SOH (State of Health), SOC (State of Charge), Voltage, Current, Rating, and the readable analysis results on backlight LCD screen and smart 3 LED indicators;
CRANKING TEST : Analyzes the actual cranking voltage and the cranking time to help you quickly figure out the whole state of the starting system;
CHARGING TEST : Test different parts of charging system, including generator, rectifier, rectifier diode, and so on for a reliable charging volt value.
Feature
Compatibility
Please be noted that battery type and CCA values (Cold Cranking Amp) marked on the battery label. Please refer to it before using BT100.
1. Regular Flooded
2. AGM Flat Plate
3. AGM Spiral
4. GEL
5. EFB
Note: If your vehicle battery is not the battery mentioned above and you are not sure about which type it is, please choose AGM to conduct test, and the error is within 10%.
Technical Specification
Display: 128x64 LCD display
Working Temperature: -20°C~65°C (-4°F~140°F)
Storage Temperature: -20°C~70°C (-4°F~158°F)
Dimensions: 136.5mm*75.5mm*22.5mm
Weight: 260g
Package List
TOPDON BT100 Vehicle Battery Tester
User Manual
FAQ
Q: Is BT100 able to test vehicle alternator?
A: BT100 can test alternator.
Q: Will BT100 hold last test results in memory?
A: Yes, it will keep the last test results for data review.
Q: Is BT100 able to test motorcycle batteries?
A: It can test 12V battery, between 100 and 2000 CCA. If the motorcycle battery is
within these values, then yes.
Q: How to set the CCA range?
A: You can set the data near to the CCA standard number of your battery.
Q: Can the firmware be updated?
A: BT100 is a basic tool, so a firmware update would not be needed.
Q: Does it test 12V deep cycle batteries?
A: Yes, it does.
Q: Will BT100 work on motorcycle charging systems?
A: It works on a 12V system and the CCA range is between 100-2000.
Q: Will this tester work with marine batteries?
A: Yes, it can work with marine batteries.
Q: Will this accurately load test ATV batteries?
A: Yes, it can accurately load test ATV batteries.
Q: What does SOH, SOC, and RES mean?
A: The SOH refers to the “State of health”. The SOC is the “State of charge” and the
RES is the “resistance value” of the battery.
Warning
DO NOT place the tester near the engine or exhaust pipe to avoid damage from
high temperatures.
DO NOT smoke, cause sparks, or strike matches near the battery when testing.
DO NOT remove battery clamps while testing.
DO NOT put the tester into a highly humid or dusty environment.
DO NOT disassemble the tester.