Platinum 360+ Epoxy Resin FAST. Clear. Non toxic FDA Food grade. Free Freight

$471.90 Buy It Now, FREE Shipping, eBay Money Back Guarantee
Seller: diy_composite_supplies ✉️ (33,454) 98.7%, Location: Hemmant, AU, Ships to: AU, Item: 144115451779 Platinum 360+ Epoxy Resin FAST. Clear. Non toxic FDA Food grade. Free Freight.

Platinum 360+  - Coaster, Casting, Cheese Platters, Bench and Table Top! Platinum 360+ is an ideal Cheese Platter, Coaster and Coating Epoxy as it is an FDA approved food grade and non-toxic (and non dangerous goods) Resin that is absolutely perfect for those wanting to make high gloss, hard surface, absolute clarity, high temperature resistance and quick setting products for the craft market.This resin comes from the work we undertook in developing our world acclaimed surfboard resin by the same name. In Platinum 360+, we found that everything needed in the world's best surfboard epoxy resin, was actually everything that we needed in a cheese platter, coaster and coating resin? * Quick Cure - Platinum 360+ can coat or painted on a surface and be set within 2.5 hours (sandable in about 4 hours) and be fully cured within 24 hours (rock hard - normal resins take 3 days to cure). The same 360+ resin can cast up to 10mm thick and be set in about 1 hour and demoulded within about 4 hours. With heating of the resin jugs in hot water? Even half these times are possible. * High Gloss -Platinum 360+ has the highest gloss of any resin straight from a brush. It has a higher gloss than polished marble! and Platinum 360+ even self levels. * UV and Non-Yellowing -Obviously, surfboard epoxies get exposed to the sun more than any other Epoxy? And so when we made Platinum 360+, we wanted to have the highest UV protection and non-yellowing in the world! We were successful in this and indications are that clear Platinum 360+ epoxy will outlast our oppositions by up to 5 years and if pigments are used? Then that number rises up to 10 years! * Clarity -Platinum 360+ is absolutely water clear! - A standout feature of this resin is its sparkling clarity. * Self Gassing to remove bubbles -Platinum 360+ has a self gassing formula to help remove any bubbles generated in the mixing process. Once 360+ is applied on a surface or in a casting? Then a simple pass of a blow torch will remove surface bubbles for a smooth, glossy and hard finish. * High Temperature Heat Resistance -One of the features of Platinum 360+ is that it has a  high surface heat resistance. Some normal resins can start softening at 49 deg C, while Platinum 360+ has a heat resistant surface of 80 deg C! This makes 360+ about the best heat resistant surface resin at normal prices on the market. Sure, we have higher heat resisting resins that we make and these will resist up to 600 deg C? (these are used in the spacecraft industry and are prohibitive in their costs) * Rock Hard, Scratch Resistant Surface -Another of the features of Platinum 360+ is its cured surface hardness! The rating of hardness is measured as Shure D. Our Shure D rating is 90. This rating is about the hardest in the industry regardless of price? This rock hard surface helps resist any possible scratches? Much more than any other Epoxy Resin! * Quality and Price -When one makes a comparison of all then outstanding properties of Platinum 360+, and then compares them to existing Epoxy resins on the market? One would expect to pay double our selling price?* World market -Platinum 360+ was always destined for a world market and as such, when formulated by us, we had in mind that we need to have Platinum 360+ at a higher quality level than any other comparably priced Epoxy Resin in the world! (A big challenge). Our focus was to look around the world to find the very best features of the many 1000's of resins brands on offer, then identify their best features and finally improve those features to be incorporated into Platinum 360+.. We are happy to say that we have achieved all this and more in Platinum 360+. Proudly developed in Australia and manufactured by us at Platinum Epoxies factories in both Australia and China using local and imported components for world distribution. Mixing Platinum 360+ is easy! Mix ratio is 2 parts resin to 1 part hardener by volume (or if measuring by weight? Then 100 parts resin Part A is mixed with 43 parts Hardener Part B). Mix strictly to the ratio given.   Technicalk Information: Platinum 360+ @ 25 deg C. Resin Part A Clear Liquid - Specific Gravity g/ml - 1.17. - Viscosity mPas - 10,160 Hardener Part B Clear Liquid - Specific Gravity g/ml - 0.99 - Viscosity mPas - 25 Glass Transition Temperature - 80 deg C Shore D Hardness - 90 Gloss Reading - will polish to 98 GU Mix Viscosity mPas - 650 Pot Life - 20 mins (variable with temperature) Thin Film - 2 1/2 hours     Technical help is available in Australia / NZ from AA Composites Brisbane, Australia.  +61 444 56 86 46 Shipping We deliver via Australia Post or if urgent? Then Courier delivery can be arranged. Product is processed within 3 working days Return Policy Please note: Since the conditions of application and use of our products are beyond our control. No warranty is expressed or implied regarding the accuracy of the information, the results to be obtained from the use of the product, or that such use will not infringe on any patents. The information is furnished with the express condition that you will make your own tests to determine the suitability of the product for your particular use. Contact Us About Us Other Listings Please remember to give us a positive feedback.

    

  • Condition: New
  • Model: 15Lt
  • Colour: Clear
  • Brand: Platinum

PicClick Insights - Platinum 360+ Epoxy Resin FAST. Clear. Non toxic FDA Food grade. Free Freight PicClick Exclusive

  •  Popularity - 323 watchers, 0.3 new watchers per day, 987 days for sale on eBay. Super high amount watching. 49 sold, 0 available.
  •  Best Price -
  •  Seller - 33,454+ items sold. 1.3% negative feedback. Great seller with very good positive feedback and over 50 ratings.

People Also Loved PicClick Exclusive