Hohner accordion springs Spring set (6 pieces) for Hohner DBA
For Hohner 114, 1140, 2815, 2915, Erica , Corso diatonic accordions Corona II, Corona III, club II, clubAtlanta ...
Set of 6 springs:
2 springs of 60/100 for inner row on the melody side 3 springs of 65/100 for outer row on the melody, bass and chord side 1 x 70/100 spring for air valve button
The composition can be modified at your request. In this case, specify it imperatively by ebay messaging. The set can be modified (quantity, diameter ) on request, only thru "My eBay > Messages".
Please note that the dismantling and reassembly of a keyboard can only be done by a careful and experienced handyman! The springs are to be cut in length in the case of certain models.
The parts that I provide are intended for the models mentioned at the top of the ad, for the use for which they are made for normal use. I will in no way be responsible for damage caused by repairs not carried out according to the rules of the art. If you need technical advice, please consult the FAQ as well as the "Tips and Tricks" on my diato site. bzh
If in doubt, have your instrument repaired by a competent accordion repairer, changing a spring is not very expensive ;-)
A very légère trace of oxidation on the spring steel is irrelevant. I advise you to very lightly oil the springs before fitting them into the accordion.
Pays de fabrication | France |
EAN | Non applicable |
Marque | - Sans marque/Générique - |
Sous-type | Diatonique |
Type | Accessoire, Pièce |
Matériau | Acier à ressort |
Numéro de pièce fabricant | Ressorts 2915 |