Irdes-1992
—Professional Auto Parts Supplier
Features:
* Fitment: Works for Chrysler, Jeep, Dodge 3.7 and 4.7L Engines (Check the applicable models in description). All of these models are dated from 1999 to 2013.
* Direct Replacement: Alternative to the Miller 10102 that does the job of the 8426, 8387 and 8516A used for Jeep, Dodge, Chrysler 3.7 and 4.7 engines.
* Functional & Protective: The rocker arm remover is used to allow removal of the camshaft, rocker arms and hydraulic lash adjusters (lifters) from engines. It's a specialty tool used to compress the valve springs and access the keeper when changing the valve springs, helping you promptly finish the task without any damage to the camshaft or camshaft lobes.
* Material: Featured top high quality solid steel with a slick black finish, guaranteed against breaking and bending, repeatedly tested and gradually optimized to ensure its excellent performance and lasting service time.
Descriptions:
Rocker Arm Remover Installer & Valve Spring Compressor Tool Miller 8426, 8387, 8516A and 10102 for Chrysler, Jeep, Dodge 3.7 and 4.7 engines.
Similar to the Miller 10102 that does the job of the 8426, 8387 and 8516A used on 3.7 and 4.7 Dodge engines.
For use on Dodge, Jeep, and for Chrysler 3.7 liter and 4.7 liter engines (partial listing below), this tool works on 1999-2013.
This special rocker arm remover must be used to allow removal of the camshaft, rocker arms and hydraulic lash adjusters in 4.7 Liter Engines. The valve spring tool allows access at the valve keeper so a magnet can be used to remove it.
A must have
It's a specialty tool to remove and install rocker arms safely without damage to the camshaft or camshaft lobes.
Easy & Convenient to Install
Remove rocker arms and lash adjusters.
Remove the camshaft bearing caps and the camshaft. (Note: All six valve springs and valves are removed in the same manner; this procedure only covers one valve and valve spring.)
Using special tool valve spring compressor, compress the valve spring. (Note: It may be necessary to tap the top of the valve spring to loosen the spring retainers locks enough to be removed.)
Remove the two spring retainer lock halves. (Note: The valve spring is under tension use care when releasing the valve spring compressor.)
Remove he valve spring compressor.
Remove the spring retainer and the spring.
Pay Attention To:
The cylinder heads must be removed before installation;
Coat the rocker arms with clean engine oil prior to installation;
Make sure the rocker arms are installed with the concave pocket over the lash adjusters. Failure to do so may cause severe damage to the rocker arms and/or lash adjusters.
This tool works on 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012 and 2013. Partial Application below:
For 2006 (DR, HB, KJ, ND, WK, XK) - Systems (9 - Engine, 3.7L, 9 - Engine, 4.7L)
For 2007 (DR, HB, HG, KA, KJ, ND, WK, XK) - Systems (9 - Engine, 3.7L, 9 - Engine, 4.7L)
For 2008 (DR, HB, HG, KA, KK, ND, WK, XK) - Systems (9 - Engine, 3.7L, 9 - Engine, 4.7L)
For 2009 (DS, HB, HG, KA, KK, ND, WK, XK) - Systems (9 - Engine, 3.7L, 9 - Engine, 4.7L)
For 2010 (DS, KA, KK, ND, WK, XK) - Systems (9 - Engine, 3.7L, 9 - Engine, 4.7L)
For 2011 (DS, KA, KK, ND) - Systems (9 - Engine, 3.7L, 9 - Engine, 4.7L)
For 2012 (DS, KK) - Systems (9 - Engine, 3.7L, 9 - Engine, 4.7L)
For 2013 (DS) - Systems (9 - Engine, 4.7L)
Item Specifics | |
---|---|
Colour : | Black |
Fitment : | For Chrysler Dodge & Jeep 3.7L & 4.7L engines |
Manufacturer Part Number : | Does Not Apply |
Brand : | IR-Autoparts |
Surface Finish : | Black Oxide |
Material : | Steel |
Type : | Rocker Arm Remover Installer Valve Spring Compressor Tool |
Warranty : | 1 Year |
1. Payment methods accepted: Payoneer . Our Payoneer account allows you to pay by credit card, debit card and your paypal balance.
2. We ship items to Your Ebay address .Please make sure your Ebay address is correct before you pay, cause it cannot be changed once the order shipped out.
1. Item will be shipped out within 1-2 business day after clear payment received.
2. Please make sure shipping address on your ebay account is correct & up-to-date.
3. All of our items are shipped from our AU warehouse.
4. Please feel free to contact us by email if you cannot get your order in time.
Please read the shipment and payment detail carefully before you bid.
Returns1. Return to us within 60 days from the delivery date for exchange or refund. Refund will be given as Money back or item exchange (buyer's choice).
2. Return shipping fee is the responsibility of buyer unless the return is a result of our mistake.
3. If you need return, please contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.the
Please contact us via ebay using"Contact member". We will respond within 1 business day or less.Thank you for your understanding.
Our office hours is as below :
Irdes-1992
—Professional Auto Parts Supplier
DESCRIPTION PAYMENT SHIPPING RETURN POLICY CONTACT US |
Shop Category Store Home
AU Stock Fast Shipping
New Arrival!
AU -- Dent Repair Kits & Tools
Other Hot Recommend
|
Rocker Arm Remover Installer & Valve Spring Compressor Tool for Chrysler, Dodge, Jeep 3.7 & 4.7L Engines
Features:
* Fitment: Works for Chrysler, Jeep, Dodge 3.7 and 4.7L Engines (Check the applicable models in description). All of these models are dated from 1999 to 2013.
* Direct Replacement: Alternative to the Miller 10102 that does the job of the 8426, 8387 and 8516A used for Jeep, Dodge, Chrysler 3.7 and 4.7 engines.
* Functional & Protective: The rocker arm remover is used to allow removal of the camshaft, rocker arms and hydraulic lash adjusters (lifters) from engines. It's a specialty tool used to compress the valve springs and access the keeper when changing the valve springs, helping you promptly finish the task without any damage to the camshaft or camshaft lobes.
* Material: Featured top high quality solid steel with a slick black finish, guaranteed against breaking and bending, repeatedly tested and gradually optimized to ensure its excellent performance and lasting service time.
Descriptions:
Rocker Arm Remover Installer & Valve Spring Compressor Tool Miller 8426, 8387, 8516A and 10102 for Chrysler, Jeep, Dodge 3.7 and 4.7 engines.
Similar to the Miller 10102 that does the job of the 8426, 8387 and 8516A used on 3.7 and 4.7 Dodge engines.
A must have
Easy & Convenient to Install
Pay Attention To: The cylinder heads must be removed before installation;
This tool works on 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012 and 2013. Partial Application below:
For 2006 (DR, HB, KJ, ND, WK, XK) - Systems (9 - Engine, 3.7L, 9 - Engine, 4.7L) 1. Payment methods accepted: Payoneer . Our Payoneer account allows you to pay by credit card, debit card and your paypal balance. 1. Item will be shipped out within 1-2 business day after clear payment received. Please read the shipment and payment detail carefully before you bid. 1. Return to us within 60 days from the delivery date for exchange or refund. Refund will be given as Money back or item exchange (buyer's choice). Please contact us via ebay using"Contact member". We will respond within 1 business day or less.Thank you for your understanding. - 9:00 a.m. to 1:00 p.m. (GMT +8) of Saturday And our office is closed on Sunday and public holidays. We apologize for the late reply during the holidays.Please contact us via ebay using"Contact member". We will respond within 1 business day or less. Please include your ebay item number or order number in all communications. Copyright of XXXX. All rights reserved. |