Ktm / Husqvarna / Gasgas Manual Cam Chain Tensioner 2007-2022 Nihilo

$214.95 Buy It Now, FREE Shipping, 30-Day Returns, eBay Money Back Guarantee
Seller: ozmxsuperstore ✉️ (1,015) 100%, Location: Sydney, AU, Ships to: WORLDWIDE, Item: 185993307684 KTM / HUSQVARNA / GASGAS MANUAL CAM CHAIN TENSIONER 2007-2022 NIHILO.

 

Made in the USA

The all new Nihilo Concepts Manual Cam Chain Tensioner has been tested and developed in conjunction with the factory teams to provide the best cam tensioner available on the market today. Fits KTM / Husqvarna 250 and 350 four strokes. ( see Fitment) This tensioner is a direct replacement for part number 77336008000

 It’s refined construction and design provides accurate adjustment without the possibility of cam chain slippage. The OEM tensioner is held tight by oil pressure and if oil flow is restricted even for a few seconds the stock tensioner can lose pressure and the chain can jump causing catastrophic damage to you motor. Professional teams like Red Bull KTM and Rock Star Husqvarna don’t like talking that chance that’s why they run the Nihilo Manual tensioners.

 A solid Stainless steel pusher is attached to a threaded aluminum insert with an aluminum lock nut to hold everything in place. A small “O” ring and OEM brass washer keep the engine sealed tight. The Nihilo manual tensioner re-uses the OEM brass crush washer and incorporates a beveled edge that self-centers the washer for a perfect fit and seal. There is no longer the need to block off the oil jet because the threaded insert blocks the jet pushing more oil pressure to the top of the motor.

 Don’t take a chance with the stock Hydraulic tensioner failing, install the Nihilo manual Tensioner today.

 Nihilo KTM / Husqvarna 250 and 350 Manual Cam Chain Tensioner Instructions

  1. Remove Stock tensioner from the motor with a 24mm wrench.
  2. Retain the brass crush washer for use with the Nihilo tensioner
  3. Remove the blue locking nut from the tensioner and screw the SS pusher assembly all the way into the black insert until it bottoms out
  4. Install the brass crush washer onto the black insert and slide the assembly into the motor and start threading it in by hand finish by tightening with 19mm wrench
  5. With a 6mm wrench now turn the Stainless Steel threaded pusher clockwise (tighten) until you feel it touching the cam chain guide then tighten ½ turn to achieve the correct tension, next install the blue lock nut.
  6. While holding the 6mm head of the SS pusher stationary tighten the blue locking nut with a 13mm wrench
  7. You are done installing your new Nihilo Concepts manual Cam Tensioner. We suggest you check the tightness when servicing you motorcycle approximately every 6-8 hours. Simply remove the blue nut, back off the tensioner until it stops and then re-tighten by hand until you feel tension then go ½ turn more with the 6mm wrench and install the blue lock nut as described above. On new motors there will be very little free play , this insures that the chain cannot jump as the motor breaks in small adjustment may be necessary.

Fitment (See Full Fitment Here )

  • 2007 450 SX-F
  • 2007 450 SXS-F
  • 2007 505 SX-F PRESERIES
  • 2008 450 SMR
  • 2008 450 SX-F
  • 2008 450 SXS-F
  • 2008 450 XC-F
  • 2008 505 SX-F
  • 2008 505 XC-F
  • 2009 450 SMR
  • 2009 450 SX ATV
  • 2009 450 SX-F
  • 2009 450 SX-F
  • 2009 450 XC-F
  • 2009 505 SX ATV
  • 2009 505 XC-F
  • 2010 450 SMR
  • 2010 450 SX ATV
  • 2010 450 SX-F
  • 2010 450 SX-F
  • 2010 450 SX-F FACT.REPL.NAGL
  • 2010 505 SX ATV
  • 2011 350 SX-F
  • 2011 350 SX-F
  • 2011 350 SX-F CAIROLI REPLICA
  • 2011 350 XC-F
  • 2011 450 RALLY FACTORY REPLICA
  • 2011 450 SX-F
  • 2011 450 SX-F
  • 2012 350 EXC-F
  • 2012 350 EXC-F
  • 2012 350 EXC-F
  • 2012 350 EXC-F SIX DAYS
  • 2012 350 SX-F
  • 2012 350 SX-F
  • 2012 350 SX-F CAIROLI REPLICA
  • 2012 350 XC-F
  • 2012 350 XCF-W
  • 2012 450 RALLY FACTORY REPLICA
  • 2012 450 SMR
  • 2012 450 SX-F
  • 2012 450 SX-F
  • 2012 505 SX ATV
  • 2012 FREERIDE 350
  • 2012- 2013 250 SX-F
  • 2013 250 SX-F
  • 2013 250 XC-F
  • 2013 350 EXC-F
  • 2013 350 EXC-F
  • 2013 350 EXC-F
  • 2013 350 EXC-F SIX DAYS
  • 2013 350 SX-F
  • 2013 350 SX-F
  • 2013 350 XC-F
  • 2013 350 XCF-W
  • 2013 450 RALLY FACTORY REPLICA
  • 2013 FREERIDE 350
  • 2013 FREERIDE 350
  • 2013 RC 250 R
  • 2014 250 EXC-F
  • 2014 250 EXC-F
  • 2014 250 EXC-F SIX DAYS
  • 2014 250 SX-F
  • 2014 250 SX-F
  • 2014 250 XC-F
  • 2014 250 XCF-W
  • 2014 350 EXC-F
  • 2014 350 EXC-F
  • 2014 350 EXC-F
  • 2014 350 EXC-F SIX DAYS
  • 2014 350 SX-F
  • 2014 350 SX-F
  • 2014 350 XC-F
  • 2014 350 XCF-W
  • 2014 350 XCF-W SIX DAYS
  • 2014 450 RALLY FACTORY REPLICA
  • 2014 FREERIDE 350
  • 2014 FREERIDE 350
  • 2014 RC 250 R
  • 2015 250 EXC-F
  • 2015 250 EXC-F
  • 2015 250 EXC-F SIX DAYS
  • 2015  250 SX-F
  • 2015 250 SX-F
  • 2015 250 XC-F
  • 2015 250 XCF-W
  • 2015 350 EXC-F
  • 2015 350 EXC-F
  • 2015 350 EXC-F
  • 2015 350 EXC-F SIX DAYS
  • 2015 350 SX-F
  • 2015 350 SX-F
  • 2015 350 XC-F
  • 2015 350 XCF-W
  • 2015 350 XCF-W SIX DAYS
  • 2015 450 RALLY FACTORY REPLICA
  • 2015 FREERIDE 350
  • 2015 FREERIDE 350
  • 2015 RC 250 R
  • 2016-2021 250 SX-F
  • 2016-2021 250 XC-F
  • 2016-2021 250 EXC-F
  • 2016-2021 250 XCF-W
  • 2016-2021 Freeride 350
  • 2016-2021 350 SX-F
  • 2016-2021 350 XC-F
  • 2016-2021 350 EXC-F
  • 2016-2021 350 XCF-W
  • Condition: Brand New
  • Brand: Nihilo Concepts
  • Compatible Make: KTM
  • Manufacturer Part Number: NMCT2
  • Country/Region of Manufacture: United States
  • Vintage Part: No
  • Universal Fitment: Yes
  • Compatible Year: 2007
  • Colour: Blue
  • Performance Part: Yes

PicClick Insights - Ktm / Husqvarna / Gasgas Manual Cam Chain Tensioner 2007-2022 Nihilo PicClick Exclusive

  •  Popularity - 0 watchers, 0.0 new watchers per day, 256 days for sale on eBay. 0 sold, 1 available.
  •  Best Price -
  •  Seller - 1,015+ items sold. 0% negative feedback. Great seller with very good positive feedback and over 50 ratings.

People Also Loved PicClick Exclusive