Further Details
Title: ICY BOX USB 3.0 Front Panel Black IB-HUB1417-i3 Condition: New Description: The ICY BOX iB-HUB1417-i3 front panel adds additional USB ports and a card reader on the front of the computer case. Easy to upgrade provides additional, easily accessible interfaces.The front panel has a total of three USB 3.0 ports, which enable data transfer up to 5 Gbps. The USB interfaces are available in two different versions: the tried and tested USB-A port, which many USB devices continue to use. And the modern USB-C port, which is already used on many smartphones, new USB sticks and external hard drives. Two USB-A 3.0 ports and one USB-C 3.0 ports provide a balanced range of connections. The USB ports can be used for normal charging (no fast charging) of smartphones, the maximum charge is 5 volts, 900 mA.The card reader supports SD memory cards and microSD memory cards with a storage capacity up to 2 TB. The card reader is suitable for UHS-I (HC-I and XC-I) memory cards and can read and write up to 100 MB/s. Since the card reader supports the multi-LUN function, you can use both card slots, SD and microSD, at the same time.To install the front panel hub, you need a 3.5" (8.89 cm) mounting bay (also called floppybay or floppy bat) on the front of your PC case. The panel is connected internally directly to the motherboard and requires a 19-pin or 20-pin USB 3.0 port. A SATA power connection from the power supply is also required for the power supply. A USB 3.0 cable is included (50 cm length, USB-A to 20-pin USB). The front panel is made of high quality metal with a simple black finish and is fastened with screws in the case. A set of screws is included. The front panel supports Windows and macOS. The USB ports support Plug & Play and HotSwap. Series: IB-HUB1417-i3 Brand: ICY BOX Colour: IB-HUB1417-i3 Voltage: 5 Volts MPN: 60433 Type: USB Hubs Operating System: Windows - 3-way USB 3.0 hub - expands your PC with additional, easily accessible USB ports on the front housing
- For 3.5 inch slot - installation into a standard 3.5 inch mounting bay in PC case (floppy or floppy slot)
- USB 3.0 connection - 1x USB-C and 2x USB-A up to 5 Gbps, UHS-I card reader for SD and microSD up to 2 TB, can be used simultaneously
- EASY INSTALLATION - Requires 20 pin or 19 pin USB 3.0 port on the motherboard and SATA power connector, includes USB cable (50 cm)
- Frame made entirely of cold rolled metal including screw set, panel supports UASP, Plug & Play and HotSwap as well as Windows and MacOS
Missing Information?
Please contact us if any details are missing and where possible we will add the information to our listing. |