Seller: thefastenerwarehouse1✉️(38,167)99.9%,
Location:4172, AU,
Ships to: AU,
Item:195643924266M10 x 1.25p x 100mm (PT) Metric Fine Hex Bolt High Tensile Class 8.8 Zinc Plated.
304 Grade Stainless Fasteners
316 Grade Stainless Fasteners
Zinc Plated Fasteners
Black Plain Fasteners
Galvanised Fasteners
Nylon Fasteners
Visit Our Ebay Store
Product Information
Hex Bolts has a hexagon head, part thread and part shank and is used to fasten material. Used to fasten objects together by inserting the bolt from the one end and securing it with either a nut on the other end or into a taped hole. A nut and bolt combination compresses everything together. To tighten the nut requires a socket and wrench or a spanner, If, while tightening the nut, the bolt turns with it, a second spanner or wrench is required to hold-on to the bolt while the nut is tightened. If thread length is critical there is a cross over where a hex bolt could be fully threaded. This is due to a gradual change in the fastener industry due to wholesalers wanting to reduce their stock holdings, now they only carry the shorter lengths as fully threaded. Therefore, if thread length is critical, always check our specifications or contact us prior to ordering
A guide to determining the approx. thread length, please use as reference only: upto and including 125mm = 2 x diameter + 6mm, over 125mm up to and including 200mm = 2 x diameter + 12mm, over 200mm = 2 x diameter + 25mm
Material / Coating: Zinc Plated is the most common fastener of plating due to its the low cost and shinny bright silver finish. A thin layer of zinc is applied by either electroplating or mechanically. It is intended to be used internally. Whilst some people use it externally it isnt recommended if corrosion is a concern. If you want a fastener that will withstand the outdoor elements choose from our Stainless steel range
Material Strength: Bolts are made to class strength 8.8. They have a min yield strength of 640 and a min tensile strength is 800 Mpa
Thread Pitch (Metric): Pitch means the distance between the peaks of two threads along a screw, bolt, or fastener expressed in millimetres (mm). Used when referring to Metric parts. For example, a thread pitch of 1.50mm means that the distance between one thread and the next is 1.50mm
Fastener Length: Is generally measured from the point where the surface of the material will be when the fastener is installed to the end of the fastener. Thus, fasteners with heads that sit above the surface are measured from under the head to the end of the fastener, while fasteners that sit flush with the surface are measured from the top of the head to the end of the fastener
A guide to determining the approx. thread length, please note this is only a guide: upto and including 125mm = 2 x diameter + 6mm, over 125mm up to and including 200mm = 2 x diameter + 12mm, over 200mm = 2 x diameter + 25mm
Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you see a problem with our specifications please contact us
Dimensions: Our stock is sourced from various suppliers, therefore differences may exist between batches such as height, width, visible stamped markings, appearance or actual finish
Photos: are of the product but may not be the actual diameter, height, width, length you may require, always refer to the size in the description and additional specifications data provided prior to ordering
Disclaimer: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and The Fastener Warehouse is not responsible for any loss, claim or damages arising therefrom. In developing this information, The Fastener Warehouse has made a determined effort to present it accurately
Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
Buy with confidence: ⇒ 10+ years experience selling online, > 19,000 stock lines, > 80 million pieces ex stock in Brisbane QLD
Prices: Include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
Technical Specification
100mm (26mm Thread)
Item Length (From Under Head)
Bolt Only
Type
Hex Head
Head Style
10mm | M10
Diameter Size
M10 x 1.25p Fine
Size x Pitch
M10 (10mm)
Bolt Size
1.25mm
Thread Size
Metric - Fine
Thread Type
Metric
System of Measurement
Right Hand
Thread Direction
100mm
Length
3/8"
Closest Size in Imperial
Part Thread (PT)
Part Or Full Thread
Choose your length to view
Thread Length T
26mm
Thread Length Approx Int
9.78 - 10.00mm
Product Diameter D
15.73 - 16.00mm
Across Flats Af
16mm
Spanner Size
17.77 - 18.40mm
Across Corners Ac
6.22 - 6.58mm
Head Height H
Hex
Drive Type
Carbon Steel
Material
High Tensile Class 8.8
Grade
Zinc Plated
Finish
Moderate
Corrosion Protection Level
Zinc Silver Plated
Finish.1
AS1110.1
Standard
Hobson Engineering
Brand
Brighton Best | Bremick Fasteners
Alternative Brands
BH88ZFM100100, HMF810100Z, 815092
MPN
9314818686945, 082893995533
UPC
Select From The Dropdown Above
Number in Pack
Shop Categories
304 GRADE STAINLESS FASTENERS
316 GRADE STAINLESS FASTENERS
410 GRADE STAINLESS FASTENERS
ALUMINIUM FASTENERS
BLACK / PLAIN FASTENERS
GALVANISED FASTENERS
NYLON FASTENERS
TOOLS
VARIOUS OTHER MATERIALS
ZINC PLATED FASTENERS
Other items
ebay listing template design by
Condition:Brand New
Pack Quantity:1
Item Length (From Under Head):100mm (26mm Thread)
Type:Bolt Only
Head Style:Hex Head
Diameter Size:10mm, M10
Size x Pitch:M10 x 1.25p Fine
Bolt Size:M10 (10mm)
Thread Size:1.25mm
Thread Type:Metric - Fine
System of Measurement:Metric
Thread Direction:Right Hand
Length:100mm
Closest Size in Imperial:3/8"
Thread Length T:Choose your length to view
Thread Length Approx Int:26mm
Product Diameter D:9.78 - 10.00mm
Across Flats Af:15.73 - 16.00mm
Spanner Size:16mm
Across Corners Ac:17.77 - 18.40mm
Head Height H:6.22 - 6.58mm
Drive Type:Hex
Material:Carbon Steel
Grade:High Tensile Class 8.8
Corrosion Protection Level:Moderate
Finish.1:Zinc Silver Plated
Standard:AS1110.1
Brand:Hobson Engineering
Alternative Brands:Brighton Best, Bremick Fasteners
MPN:BH88ZFM100100
UPC:9314818686945
Number in Pack:Select From The Dropdown Above
Finish:Zinc Plated
Part Or Full Thread:Part Thread (PT)
PicClick Insights - M10 x 1.25p x 100mm (PT) Metric Fine Hex Bolt High Tensile Class 8.8 Zinc Plated PicClick Exclusive
Popularity - 3 watchers, 0.0 new watchers per day, 387 days for sale on eBay. High amount watching. 1 sold, 6 available.
Popularity - M10 x 1.25p x 100mm (PT) Metric Fine Hex Bolt High Tensile Class 8.8 Zinc Plated
3 watchers, 0.0 new watchers per day, 387 days for sale on eBay. High amount watching. 1 sold, 6 available.
Best Price -
Price - M10 x 1.25p x 100mm (PT) Metric Fine Hex Bolt High Tensile Class 8.8 Zinc Plated
Seller - 38,167+ items sold. 0.1% negative feedback. Top-Rated Plus! Top-Rated Seller, 30-day return policy, ships in 1 business day with tracking.
Seller - M10 x 1.25p x 100mm (PT) Metric Fine Hex Bolt High Tensile Class 8.8 Zinc Plated
38,167+ items sold. 0.1% negative feedback. Top-Rated Plus! Top-Rated Seller, 30-day return policy, ships in 1 business day with tracking.