Package contains : 1 set FRONT brake pad + 1 set REAR brake pad
Brake pad advantages
· Standard size for easy installation
· Friction material grooving easy to discharge dust and maintain pressure balance
· Chamfering for improved bedding
· dampening shims reduce noise
Key points for brake pad replacement
· Before replacing the new brake pads, please check whether the brake disc is below the minimum thickness and whether the surface is certified. If necessary, please replace it at the same time.
· 1 Clean thoroughly!
· 2 Lubricate properly!
· 3 Accessories must be replaced!
· 4 Please allow 200km for bedding in!
Bedding-in Procedures
When fitting new brake pads, it is necessary to bed-in & condition the material surfaces correctly with the following procedures:
1. Accelerate the vehicle to 60km/h.
2. Using light to moderate pedal effort reduce speed to 10km/h.
3. Repeat 1 & 2 at least 10 times allowing 1/3 km between cycles.
4. Allow pads to cool prior to returning the vehicle to the owner.
DO NOT drive a vehicle with brakes continually applied as a bed-in, as this may lead to excessive heating and loss of braking efficiency.
If the friction surface of the BRAKE DISC is uneven. Or lower than the minimum thickness, please replace the brake disc at the same time to ensure the braking effect.