CARBING STRUT TOWER BAR Front / Aluminium Type II (MCS) FOR Roadster (MX-5) NB8

Unsold See similar items $720.53 Buy It Now, FREE Shipping, eBay Money Back Guarantee
Seller: cjmotor ✉️ (24,097) 96.9%, Location: Sunnybank Hills, QLD, AU, Ships to: WORLDWIDE, Item: 182181900347 CARBING STRUT TOWER BAR Front / Aluminium Type II (MCS) FOR Roadster (MX-5) NB8.

1. To make hight rigidity by using oval shaft.

Strut Tower Bar is a standard item for body reinforcement. It will stabilize suspension’s behavior by preventing body from twisting at cornering. This is particularly effective with old models. Fitting a Strut Tower Bar to front section of a car will improve steering response, and also improve controllability of the car when fitted at the rear section as rear section’s behavior becomes more recognizable. Installations of these are easy, prices are reasonable, and most of all enhance your car’s appearance.

2. Shaft and brackets are welded together to optimize the force distribution for maximum rigidity.

CARBING strut bars are fully welded, creating extremely high rigidity and reducing weight. Every single product is welded by our skilled and experienced welders by hand. As a result, the beautiful weld line finish shows our commitment to the best quality.

3. Brackets use 4.5 to 5.0mm thick base plate for material strength.

Carbing tower bar brackets use 4,55.0mm thick base plate for enough strength and rigidity. It is designed to fit perfectly to the vehicle strut tower bar top without any gap between the for each application to eliminate any play from vehicle vibration.

4. Possible to control the extreme force owing to make some force release points daringly.

Okuyama (Carbing) product welding has some force release points that are determined by experience. This non complete welding releases stress caused by various driving conditions that may cause any accidents like cracks. Owing to our force release points, the damage to the one side is reduced if there is any hit on the other side.

5. Type of variations.

All welded constriction 2point shaped strut bar. This is the CARBING standard strut bar.

Added extra anchor to the firewall.All welded constriction 3 point triangulation shaped structure.

Separated 2point shaped strut bar.Its shaft and bracket are separated.Only for vehicles that have difficulty of installation.

Added extra anchor to the firewall.All welded constriction V shaped 3 point structure.

All welded constriction 2 point strut bar.30×50? shaped main shaft is applied. 2030% increased its rigidity more than standard.

Added extra anchor to the firewall.Its shaft and bracket are separated. *Only available for Porsche,Golf?.

Added extra anchor to the firewall. All welded constriction 3 point triangulation of structure. 30×50? shaped main shaft is applied. 2030% increased its rigidity more than standard.

6. About a bolt joint.

Bar and the installation bases are separated due to installation difficulties and space limitations. Most conventional products use only one bolt design. It does not hold all the forces Strut tower bar is supposed to hold in a primary purpose since the joints allows up and down movements. Okuyama spirit for the best performance added bolt to make two bolts design to brace the joints as strong as welded construction models. (except for some models)

7. Role of a Master Cylinder Stopper.

Master Cylinder Stopper regulates the unwanted movement of itself during driving. This results in better feel and touch of the brake pedal. Master Cylinder Stopper is best suited for the drivier wanting to have quick and direct control of brake.

please contact us or if you have any question!

0421622288 [24 hours]

e-mail [email address removed by eBay]

PAYMENT and SHIPPING -

PayPal and Bank deposit are the preferred method of payment

Items are shipped BY AUSTRALIA POST express or fastway couries -

please contact us for quote

Please make payment within 3 - 7 business DAYS After that period, a unpaid item dispute will be filed

Shipping TIME - - NSW , QLD = 1-2 days VIC , ACT = 2 - 2.5 days SA , WA = 2.5 - 3 days TAS , NT = 2.5 - 3 days The Shipping cost is Inc POSTAGE COST+Packaging charge + Handling charge

Dedication to Customer Service Your 100% satisfaction is our GOAL - we will do the BEST to make customers are 100% satisfied Please make sure that the part you ordered fits before altering or final installation Altered items and custom orders are not refundable or returnable Please inspect the parts immediately after receiving your order for any problems acquired during shipping A exchange can be made if you receive the wrong


Please read the following carefully for any Return & Exchange questions:

Absolutely no return or exchange after 14 days, be sure to inspect your package when it arrives. We must be notifying within 10 days of receipt if an item is damaged or not delivered. After 10 days we will only accept returns due to fitment or defects issues.

?

Damaged: Must be notifying within 10 days, please email  us and describe damages to the item and packaging materials as well. We may also ask to provide pictures to help expedite the claim process. We will explain how to claim on insurance for damaged during shipping items
Non receipt: Must be notifying within 10 days. It is buyer responsible to track packages and ensure safe arrival. If package show delivered but buyer had not received we will contact  EMS and wait for investigation. If buyer provided incorrect address, we will try to contact carrier but not guarantee replacement
Received Wrong product: Must notify within 10 days. Please check to see if product looks similar to pictures showed on ebay  then contact us either by phone of by email. We need to get the tracking/invoice # off the box so be sure not to throw away any packaging materials. We will send you return instructions and replace the correct part for you.
Bad address: If shows delivered we will try to retrieve package no guarantee. If package is return due to bad address buyer is responsible for shipping charges again.
Defects and Fitments issues: Notify within 10 days. We recommend profession help if you encounter problems. Please check auction description to match your vehicle year make and model. We may ask to provide pictures to show issues then determine if we will accept the return .

Powered by eBay Turbo Lister
  • Condition: Brand New
  • Brand: CARBING
  • Manufacturer Part Number: 642 402 0

PicClick Insights - CARBING STRUT TOWER BAR Front / Aluminium Type II (MCS) FOR Roadster (MX-5) NB8 PicClick Exclusive

  •  Popularity - 3 watchers, 0.0 new watchers per day, 406 days for sale on eBay. High amount watching. 0 sold, 5 available.
  •  Best Price -
  •  Seller - 24,097+ items sold. 3.1% negative feedback. Good seller with good positive feedback and good amount of ratings.

People Also Loved PicClick Exclusive