Product feature:
Build-in industrial micro controller
Big LCD display, all adjustable parameter
Fully 3-stage PWM charge management
Build-in-short-circuit protection, open-circuit protection, reserve
production,over-load production
Dual MOS reserve current protection, low heat production
Specifications:
Battery Type: b01 Sealed/b02 GEL/b03 Flood
System Voltage: 12V/24V Auto
Max. Charge/Discharge Current: 20A
Max. Solar Panel Input Voltage: <50V
Float Charge: 13.7V(defaul, adjustable)
Discharge Stop: 10.7V(defaul, adjustable)
USB Output Voltage/Current : 5V/2A
Equailzation: 14.4V/14.2V/14.6V
Self-consume: <10mA
Operation Temperature : -35℃ ~+60℃
Item Size: 130* 70 * 32mm
Item Weight: 154g
Protection:
Over-load protection
Short circuit protection
Lightning protection
Under-voltage protection
Over-charging protection
Reverse Polarity protection
Safety Instructions:
★Make sure your battery has enough voltage for the controller to recognize the battery before first installation.
★lnstallation Steps: Connect the system in the order of: 1.Battery > 2. Load> 3. solar panel, and disconnect the system in the reverse order: 3.>2.>1.
★Connect the battery to the charge regulator - plus and minus. it will show 1, if it detects 12V battery, 2 if it detects 24V battery.
★The regulator is only suitable for lead acid batteries: OPEN,AGM, GEL, not for nickel hydride, lithium, ions, or other batteries.
★The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator.
★Please do keep the controller stay in cool and well-ventilated place to maintain good heat dissipation.
Package Includes:
1 X 20A Solar Charge Controller(12V/24V)
1 X Instruction Manual (English)
We accept returns within 30 days of purchased. Please contact our customer service team immediately if: