Item description from the seller
Item Descriptions:
1 to 5 ways
- Not enough fan sockets on main board? No problem! Get this adapter and you can connect your 3-pin fan directly to your PSU. The product comes with only 2-pins for the power as shown in the figure above but it will work for 3-pins or 4-pins fans.
Specification:
- This cable can Turn 4Pin IDE to 3Pin/4Pin Power Supply Plug for PC Fan, It is usually used for PC PSU lacking of 3Pin/4Pin Plug.
- Model: 1 to 1 way /1 to 2 ways /1 to 3 ways /1 to 4 ways/1 to 5 ways
- Connector: 4Pin IDE Molex to 3Pin / 4Pin Fan Connector.
- Material: Black Sleeved, Black Environmental connector, 22AWG wire
- Output voltage: 12V
- Length: approx 30cm
- Color: Black
Package Included:
- 1* 4Pin IDE Molex to 4-Port 3Pin/4Pin Cooling Fan Splitter Power Cable. (5 Styles can be choose)
Notes:
- It is only a Fan Splitter Power Cable. And it doesn't support PWM fan to adjust speed.
- Please allow 1-3cm differs due to manual measurement.
- Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.
1 to 6 ways
Not enough fan sockets on main board? No problem! Get this adapter and you can connect your 3-pins or 4-pin fan directly to your PSU. The product comes with only 2-pins for the power as shown in the figure above but it will work for 3-pins or 4-pin fans.
Specifications:
- There are 2 pins in 4Pin Case Fan connection side. (the third pin is for fan speed monitor, which only use in motherboard fan header)
- If your case fan speed too fast can connect to the 5V or 7V sockets.
- Connector A: Molex 4 pin Male
- Connector B: 6 X 3-pin/4-Pin Female (2 wires only)
- Two Black fan Sockets: 12V
- Two Red fan Sockets: 7V
- Two White fan Sockets: 5V
- Wire type: 1007 24AWG
- Voltage: 12V/5V DC
- Cable length: 30cm (Approx.)
Package Included:
- 1* Molex 4 Pin To 6 X 3-pin/4-pin fan Socket converter