Micky Ha Ha Power Point Safety Cover. Save up to 25% by buying more than one cover.
The Micky Ha Ha Power Point Safety Cover completely stops children having access to power outlets or switches whether in use or not. The clear rounded design allows the user to see the status of the power point without removing the cover but stops children being able to pull plugs out or turn switches on or off. The cover is comprised of two clear coloured parts - the base and the cover. The base fits snuggly around most standard single or double power points (max 12cm wide, 8cm high) and the top cover clips on to the base with 2 child resistant catches. Appliance cords are directed out through two slots in the cover.
The cover can be turned so cords can be directed out either the top or bottom. Perfect for higher points such as air conditioner plugs to stop cords dangling. For people who don’t have children but have children visit and for flexibility, the base can be left on permanently and the top clipped on when needed. Ideal for those who like to change their furniture around.
Not for use with double adapters, plug pack chargers or mounting blocks. Not for use outside the home. Not waterproof. Buyers must determine suitability for their application before purchase. Please feel free to contact us.
This is the only safety power point cover on the market that covers the plug whilst plugged into the outlet. It is also the only cover that stops kids from inserting small items into the powerpoint. Why would you buy any other safety cover?
The Micky Ha Ha Power Point Safety Cover is also ideal for workshop areas where dust, dirt, sparks etc. are a problem. The safety cover protects the power point and stops accidental unplugging.The Micky Ha Ha Power Point Safety Cover will fits around all standard single and double power points such as Clipsal or HPM, the opening size of the base plate is 12 cm x 8 cm. The base comes complete with two adhesive strips located on the top and bottom edges of the base. To attach, simply peel off the outer tape cover and firmly press onto a cleaned and dried flat wall surface (not suitable for use on uneven or brick walls). The adhesive increases in strength over time so do not attach the cover to the base and do not touch the base for at least 3 days while the tape cures.
There is a hole in both the top and bottom of the base so the unit can be screwed to the wall. The cover should be attached using both the tape and screws for maximum strength.
Clean your Micky Ha Ha Power Point Safety Cover is as simple as using a damp cloth. DO NOT use solvent-based cleaners, abrasive cleaners or harsh chemicals as discoloration could occur and can damage the surface.
Designed and made in Melbourne, Australia.
KIDOO IS AN AUTHORISED DISTRIBUTOR FOR MICKY HA HA