Qty 100 Bugle Batten Screw 14g x 100mm Galvanised Treated Pine Hex T17 Timber

$25.00 Buy It Now, FREE Shipping, 30-Day Returns, eBay Money Back Guarantee
Seller: Top-Rated Seller fastenerkitsonline ✉️ (87,953) 99.9%, Location: Brisbane, QLD, AU, Ships to: AU, Item: 232049341353 Qty 100 Bugle Batten Screw 14g x 100mm Galvanised Treated Pine Hex T17 Timber.
  • Visit Our Store
  • |
  • About Us
  • |
  • Terms
  • |
  • Delivery
  • |
  • Payment
  • |
  • Returns
  • |
  • Technical Info
  • |
  • Contact
Visit Our Ebay Store Item Description
  • 14g (6.30mm) x 10 tpi Coarse Thread Bugle Batten In/Hex T17 Timber Screw Galvanised are most commonly used for structural framing, roofing battens, furniture, gates, fences, work benches, pergolas, carports, decking planks and landscaping. Easy to use, can be installed using 5mm hex/Allen key or 5mm hex drive bit in a power tool. The special long sharp self drilling point with a flute (Type 17) that cuts the timber fibres as it is screwed in. Timber fibres are collected in the flute and reduces the potential for splitting. The self drilling type 17 point can pierce light gauge steel up to 0.6mm withour predrilling. The ribbed bugle head self embeds and can be driven flush or countersunk below the timber surface and are used where finish is a primary concern
  • Material / Coating: Galvanised coated fasteners have been used for roofing, cladding, steel buildings, trailers, bridges, fencing, power poles, outdoor furniture, house framing, fencing and marina's for over 150 years. Since galvanising was first introduced, we have seen a lot of new terms like Class 3, Class 4, B8, Climaseal 3, Climaseal 4, Climaseal 5, Armour Ceramic Coating, Mechanical Galvanised and Ruspert. They are all variations of the original galvanise. All self drilling and timber T17 screws from Bolt and Nut Australia are guaranteed to comply to a minimum of Class 3 and extend to Class 4 and the ultimate of protection B8. Please refer to our technical pages for more information or contact us for advice on choosing the right fastener
  • What does TPI stand for?: TPI stands for "threads per inch" which literally means the number of threads within each inch on a screw, a bolt, or a fastener. To determine the TPI of a screw, count the number of threads contained within an inch of length on the fastener. If the screw is less than an inch count 1/2" of an inch and multiply by 2
  • How to measure the length of a Timber Screw: Fastener length is generally measured from the point where the surface of the material will be when the fastener is installed to the end of the fastener. Thus, fasteners with heads that sit above the surface are measured from under the head to the end of the fastener, while fasteners that sit flush with the surface are measured from the top of the head to the end of the fastener
  • Thread Length: have been included as a guide only. Due to stock being sourced from multiple suppliers variations do exist. We will always ship the same brand and thread length but subsequent orders may be another brand and the thread length may be different. If thread length is critical, please message us prior to ordering as we are happy to physically check our stock and advise prior to shipping
  • Need a Driver Bit?: A large range of suitable driver bits are available in the "Drilling, Driving and Tools" section of our website
  • Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you see a problem with our specifications please contact us
  • Dimensions: Our stock is sourced from various suppliers, therefore differences may exist between batches such as height, width, visible stamped markings, appearance or actual finish
  • Photos: are of the product but may not be the actual diameter, length, thread length, colour you require, always refer to the size in the description and additional specifications data provided prior to ordering
  • Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
  • Disclaimer: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Bolt and Nut Australia is not responsible for any loss, claim or damages arising therefrom. In developing this information, Bolt and Nut Australia has made a determined effort to present it accurately
  • Prices: include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
Specification  
Product Batten Screws
Head Type Bugle Head
Screw Size 14g (6.10mm)
Thread Pitch (TPI) 10
Overall Length 100mm
Thread Length APPROX 66mm
Head Diameter APPROX 14mm
Nibbed 6 ribs under the Head
Type 17 Point To be used in Timber
Drive Size 5mm Hex Drive
Material Mild Steel
Finish Galvanised Class 3 / 4 / B8
"Optional" Installation Tool Can be found in our store under "Tools"
Brand - Our Discretion Hobson / Bremick / Tower
This Pack Quantity 100
Socket Screws Bolts Machine Screws Security Fasteners - Stainless Washers Nuts Hex Self Drillers BUTTON / WAFER / FLAT HEAD SELF DRILLERS CHIPBOARD SCREWS Bugle Batten Screws COUNTERSUNK SELF DRILLERS METAL STAINLESS STEEL SELF DRILLERS METAL STAINLESS STEEL DECKING SCREWS TIMBER STAINLESS STEEL DECKING SCREWS TIMBER Fastener Kits ALLTHREAD Plasterboard Screws Self Tappers Masonry Anchors Light Masonry Anchors Turnbuckles/Rigging/EyeBolts Marine Hardware Rivets Nutserts Screwdriver Bits Drill Bits
ebay listing template design by
  • Condition: Brand New
  • Brand: Hobson
  • Type: Bugle Hex Batten Screw
  • Material: Case Hardened Steel
  • Screw Size: 14g (6.30mm)
  • Drive Style: Internal Hex
  • Thread Size: 14g (6.30mm)
  • Head Style: Bugle
  • System of Measurement: Imperial
  • MPN: T9PW3BH1410100
  • Grade: Class 3 / 4 / B8 Galvanised
  • Item Length: 100mm
  • Model: Batten Screw
  • Quantity: 100
  • Thread Length APPROX: 66mm
  • Overall length: 100mm
  • Thread Pitch (TPI): 10
  • Head Diameter APPROX: 14mm
  • Nibbed: 6 ribs under the Head
  • Drive: 5mm Hex Drive
  • Application: Timber
  • Freight Free: FREE delivery anywhere in AUSTRALIA
  • Australian Stock: YES, supplied ex BRISBANE
  • Tax Invoice Supplied: YES
  • Weight: 1.69600
  • UPC: 9314818551472

PicClick Insights - Qty 100 Bugle Batten Screw 14g x 100mm Galvanised Treated Pine Hex T17 Timber PicClick Exclusive

  •  Popularity - 41 watchers, 0.0 new watchers per day, 2,783 days for sale on eBay. Super high amount watching. 248 sold, 10 available.
  •  Best Price -
  •  Seller - 87,953+ items sold. 0.1% negative feedback. Top-Rated Plus! Top-Rated Seller, 30-day return policy, ships in 1 business day with tracking.

People Also Loved PicClick Exclusive