H62 Brass Sheet Roll Metal Foil Thin Panel Plate Strip Thick 0.01mm/0.02mm-1mm
Product Information ๐Product Name๏ผH62 Brass Strip ๐ Material: Brass ๐ Thickness: 0.01mm 0.02mm 0.03mm 0.05mm 0.1mm 0.15mm 0.2mm 0.3mm 0.5mm 0.4mm 0.6mm 0.7mm 0.8mm 1mm ๐ Width: 100mm 200mm 300mm 305mm ๐ Length: 1M 2M 3M 4M 5M 6M ๐ Full-Featured: laser processing, corrosion resistance, high resistance, high temperature resistance, high ductility, high finish, strong compatibility, length zero-cutting ๐ Processing Method: shearing zero cut, laser cutting, lathe, etc. ๐ Product Characteristics:Excellent plasticity, high strength, good cutting and processing, welding, good corrosion resistance, good processing, heat exchangers, tubes for paper making, machinery, electronic parts. ๐ Scope of Application: the mechanical properties and wear-resistant properties of brass belt are very good, can be used in the manufacture of precision instruments, parts of ships, gun shells, electronic instruments, mould industry, machinery industry, mould industry, water tank belt, medals and so on. Brass sounds good when struck, so gongs, cymbals, bells, horns and other musical instruments are made of brass. ๐ Introduction Brass belt is extremely good plasticity (is the best in brass) and high strength, can be cut and processed performance is good, easy to weld, the general corrosion is very stable, but prone to corrosion cracking; brass belt is an alloy of copper and zinc, because of the colour of the yellow and so named ๐ Chemical Composition Copper Cu: 68.5 ~ 71.5 Zinc Zn: residual Lead Pb: ≤ 0.03 Boron P: ≤ 0.01 Iron Fe: ≤ 0.10 Antimony Sb: ≤0.005 Bismuth Bi: ≤0.002 Note: ≤0.3 (impurity) ๐ Mechanical Properties Tensile strength σb (MPa): 340๏ฝ460 Elongation δ10 (%): ≥25 Hardness ๏ผ85๏ฝ145HV ๐ Product Details 1ใSmooth surface 2ใHigh surface precision 3ใGood antirust property and corrosion performance 4ใHigher strength, good processing plasticity |